• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Pcb adapter for smd.

I have used some amp/TE sip pin strips on my adapter they come for various pcb thicknesses. The pins are very thin almost to the point of being too fragile for insertion into a socket. I’d have to look up the part number again


Right, thats why I did not want to use these as they hang out horizontally and would sag. Drilling out by hand with a 1 mm bit is inconsequential . it takes no time at all and super easy. Plus the pins are gold plated.

nashou
 
Last edited:
Back
Top Bottom