• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Record Cleaning: Developing the Best Possible Methods

Status
Not open for further replies.
Staying on theme here - loving my Dr Vince inspired quick cleaning mix a whole bunch so thanks to all for the one litre batch mix instructions which is working great!
;-)

Now I can sit back and listen to a quiet and deeply meditative (1st) track from the "Enigma - MCMXC a.D." album which might be a good re-listen for all....
:rolleyes:
 
Last edited:
Might I suggest to the moderator that this thread be locked in soon (due to the great info contained within) as it may have just run its course due to entropy:

en·tro·py
ˈentrəpē/

Definition 2. Lack of order or predictability; gradual decline into disorder.
 
Personally I can't understand why anyone would want a moderator to lock a thread, as their are quite a number of members on AK who are plenty qualified to add some useful information. A few seconds of contemplation prior to hitting the post button might be helpful and then thinking twice prior to posting that retaliatory comment, just because someone offended you slightly.
 
Personally I can't understand why anyone would want a moderator to lock a thread, as their are quite a number of members on AK who are plenty qualified to add some useful information. A few seconds of contemplation prior to hitting the post button might be helpful and then thinking twice prior to posting that retaliatory comment, just because someone offended you slightly.
The reasons being:
1. It contains sufficient information to get about the business of cleaning records no matter what your particular philosophy - repetitive arguments do nothing but extend a burned out discussion
2. Given the feuding that has been going on within the thread, breeding more of it here (as this may be perceived) is not really adding to the original intent of the thread IMHO
3. The general inability of most people to read tone in the written word (a common human limitation) seems to always generate a default perception of malice where none was intended (like my previous post which was more an observation than any kind of intended slight). Not sure how it came across that I was offended at all???
4. Main reason here: I would rather have this thread locked as it is now and retained as a ready reference (because there is real good info within that I would like to refer back to later) rather than have it deleted as a moderator has already warned if the bickering continued (I assume that is what he means by closed)

Folks I have followed this thread and have posted soft warnings, but wow Why all the negative crap. Last time I post, next time I close an informative thread because folks can't be respectful and get along!
Regards,
Jim

5. AK'ers are perfectly within their rights to start their own threads espousing their ideals and philosophies - I believe in fact it is highly encouraged...
6. Yes, I said it once and will say it again - entropy!
7. lastly, that Enigma track I referred to previously really needs to be checked out....

Now do you understand? :bigok:
 
Last edited:
3. The general inability of most people to read tone in the written word (a common human limitation) seems to always generate a default perception of malice where none was intended (like my previous post which was more an observation than any kind of intended slight). Not sure how it came across that I was offended at all???

I took Ken's post not to mean you were offended but the people posting the "negative crap" earlier in the thread.

If "closing" the thread means it gets deleted, then I agree locking it now would make sense. If "closing" just means locking it then I say let it continue.
 
I took Ken's post not to mean you were offended but the people posting the "negative crap" earlier in the thread.

If "closing" the thread means it gets deleted, then I agree locking it now would make sense. If "closing" just means locking it then I say let it continue.
I too am definitely not immune from my point 3 as I like to believe I fall under the category of "most people" although wifey would likely argue that one:whip:
 
Last edited:
With the thread left open people could continue to post more links to sources of the supplies, they can post microscopic photos of results using the formula, additional info what ever. When a thread gets locked it pretty much gets buried unless it is made a sticky. For the most part I don't see many threads that were shut down by request from an AK member unless it was the OP, and even that is not always the case. No one is going to convince me that it is better to shut a thread down in order to insure members be respectful to each other, over leaving it open and having the members just be considerate to fellow members of their own free will.
 
Last edited:
I am totally cool with either or - my only caveat is we don't risk losing what we have as I have it bookmarked for my favorite part that gives me my current recipe. We had lost it before until the moderator was gracious enough to bring the Dr Vince postings back....
 
Also looking for a good anti-static additive to knock down the ticks and pops....
Somewhere in this thread Vince brings up quats and even a link I think. I have followed his advice here and find that the quat does help a lot with static issues. Not the easiest to work with as it comes in a solid form, but once put into solution it can be introduced to your cleaning fluid.
 
Somewhere in this thread Vince brings up quats and even a link I think. I have followed his advice here and find that the quat does help a lot with static issues. Not the easiest to work with as it comes in a solid form, but once put into solution it can be introduced to your cleaning fluid.
I did read but all the quats he mentioned cannot be easily found here in Canada
 
I did read but all the quats he mentioned cannot be easily found here in Canada
Hmmm...the bag I bought is likely more than a lifetime supply as only 10g of pellets are required to make 100ml of solution, of which one drop goes into each bottle of solution I prepare. PM me and perhaps I can help you out.
 
I have written this before, but even after purchasing a zerostat, I had static problems. Now I use an old DiscWasher brush, and lightly spritz it with a mixture of 99 pct ipa and distilled water, nearly 50 50 mix.
One or two passes over each side...and....
Knocks out that static, and could probably use only 25% ipa, if concerned about its effects.

Your results may vary. Most times after the vince cleaning method, distilled rinse and econowand shop vac, no static.
 
I have had great success with, don't laugh, the Crosley wet cleaning system, very similar to the DiscWasher. I use 91% isopropal, distilled water, and a couple of drops of dishwash detergent to break surface tension. I also use a (dry, of course) carbon fiber brush before each spin. My point all along here is, does it really need to be much more laborious and complex than this? A
 
I have had great success with, don't laugh, the Crosley wet cleaning system, very similar to the DiscWasher. I use 91% isopropal, distilled water, and a couple of drops of dishwash detergent to break surface tension. I also use a (dry, of course) carbon fiber brush before each spin. My point all along here is, does it really need to be much more laborious and complex than this? A

That depends on how soiled and the type of soiling. Mold? Oils? Bacteria? Silverfish turds?
We are all seeking clean vinyl, so let us leave no stone unturned
 
Status
Not open for further replies.
Back
Top Bottom