• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Record Cleaning: Developing the Best Possible Methods

Status
Not open for further replies.
FYI - the cleaning solution (Hepastat, Terg 3&9, iso alcohol, and distilled h2o) will be used in a 40kHz ultrasonic machine.

FWIW the Tergitol S-3 is oil based and will not do any cleaning in a water based mixture.I have confirmed this with both DOW and personal experience. It will break down into tiny droplets in the US and be a bitch to remove from LP. I have done this and been very sorry. I know others say it disolves in water they mix the two together but that is not possible according to DOW. I use the S-9 only in distilled H2O in my US and get fantastic results. I add a tiny drop of Dawn for greasy fingerprint removal.

Not trying to re open a huge can of worms just saying that the maker of that chemical (DOW) says it will not work in water based cleaning and I have had a nightmare trying to remove the oily substance after a US bath with it.
 
Call these guys or order on line. I just called and asked, they do ship to CA.
http://www.talasonline.com

This where I bought my Terg form and will buy my Triton from when I use up my Terg next year.
Thanks very much for taking the time to respond and calling them !!! :)

Being a chemical it might be a bit of a hassle getting it through customs but I will go this route if I cannot find a Canadian distributor.
 
Being a chemical it might be a bit of a hassle getting it through customs but I will go this route if I cannot find a Canadian distributor.
I ordered mine from them (Talas Online) roughly 10 years ago. No problem then...delivered by mail. There might still be a chance.

FWIW the Tergitol S-3 is oil based and will not do any cleaning in a water based mixture.I have confirmed this with both DOW and personal experience. It will break down into tiny droplets in the US and be a bitch to remove from LP. I have done this and been very sorry. I know others say it disolves in water they mix the two together but that is not possible according to DOW. I use the S-9 only in distilled H2O in my US and get fantastic results. I add a tiny drop of Dawn for greasy fingerprint removal.
The mixture is recommended by Collections Canada...I've been using it for nearly a decade without issue. In fact, for a brief period I was mixing S3 in baby oil and applying it directly to the vinyl before submerging the record in a U/S bath with water and S9. Best cleaning I've ever seen/heard, though the areas around the label protectors needed special attention. For this, I had to scrub and flush it with water/S9 to remove the last traces of the oil/S3.

I'm not sure why you're having trouble. Only reason I stopped doing it is guilt for the massive chemical dump my laundry sink drain became, though I still use this treatment to clean my Nag roller as nothing else comes close.
 
I was mixing S3 in baby oil

Yes that will work as the S-3 is OIL soluble. I do not doubt recommendations exist for using the S-3 in water. W/O beating a dead horse it sounds like what you had around the label is what I had in the grooves. My guess is the oily nature of the residue left behind would quickly become a dust gathering stylus killer actually getting the stylus oily as well. I plan to switch to Triton when my S-9 is gone and will see how that works. I have tried many home brews and even some pricey pro concoctions. I like my 1:1000 S-9 in US with a 1:600 scrub/rinse after and a final 100% D-H2O rinse. I do use the Discdoc brush and his expensive cleaning solution (with amazing results) for hand washing important (rare) LPs or really dirty ones prior to or after a US bath.
 
I do not doubt recommendations exist for using the S-3 in water. W/O beating a dead horse it sounds like what you had around the label is what I had in the grooves. My guess is the oily nature of the residue left behind would quickly become a dust gathering stylus killer actually getting the stylus oily as well.
The recommended mixture is at a 0.05% concentration of each, S3 and S9. I use a higher concentration of the mixture on my prescription eyeglasses. If it left any kind of a residue after the rinse, I'd know about it.
 
YMMV I suppose but I most assuredly had droplets of an oily substance when using S3 mixed in. Perhaps a better rinse would solve this but it seems one would just be rinsing off a substance that was never put to work since it is only soluble in oil and no oil was used in my cleaning process. As previously stated I have no doubt people can find recommendations (not from DOW however) to use S 3 in water. Perhaps the US action is what caused droplets to form? One thing I have no doubt about, because I saw it with my eyes, the S 3 did not dilute or dissolve in water, it remained whole.

I used to use 1:400 dilution when hand washing and sometimes still will but that seemed too strong for the US which can and does run on water only in many instances. Besides using 25ML of S9 each time I fill the US would see me burn through an awful lot of the stuff versus 10ML and a touch of dawn.

To change subject I plan to try (on some beaters first) this stuff my dentist recommended that he uses for his US. Safe on plastic instruments.
http://www.sultanhc.com/sw/swchanne...t/productcatalog.asp?SWAPPID=87&PCPage=689378
 
As previously stated I have no doubt people can find recommendations (not from DOW however) to use S 3 in water.
To be clear, I'm not talking about dissolving S3 in water, but rather, mixing S3 and S9 together and dissolving the mixture in water. S3 is soluble in S9, the S9 in turn is soluble in water. The combined mixture does not separate or leave an oily film when they're properly mixed together.
 
To be clear, I'm not talking about dissolving S3 in water, but rather, mixing S3 and S9 together and dissolving the mixture in water. S3 is soluble in S9, the S9 in turn is soluble in water. The combined mixture does not separate or leave an oily film when they're properly mixed together.
Many of us are adding isopropyl alcohol to our mixes. Because many nonpolar compounds and oils are included in isopropyl alcohol's range, it is quite possible that that the dissolving of S3 is enhanced by the presence of the isopropyl in the mix.

Enjoy,
Rich P
 
Can Nexazyme be added to Rushton's formula and used in an ultrasonic cleaner? I have a 10L US unit.

I was wondering something similar. I've recently built USRCM with 80 kHz US clean and 80 kHz US rinse tanks and a heated, filtered drying cube. I use Rushton's recommended proportions of X-100, H-256 and IPA scaled up for 5 gallon batches (the size of my cleaning and rinse sumps). However, some records seem to need stronger cleaning solution. I'm considering building a non-ultrasonic pre-treatment enzyme solution soaking tank for the stubborn records.

Can anyone recommend a DIY enzyme based solution like what was created for US cleaning?
 
I also use Rushton's formula. I have added an Enzyme step before US cleaning. I spray the Enzyme solution on the record, or get a fabric brush really wet, and use a lint and a bristle brush to scrub the record for about one minute. I think adding this mechanical scrubbing action to help loosen stuff in the grooves before US cleaning is a good thing. For Enzyme solution, I just switched to using a home made solution that I read about in a post. The solution is very simple: just mix the contents of one Nexazyme with one liter of water. You can get Nexazyme at Pharmacies or on Amazon.
 
I'm trying to gather the ingredients for the reg Williamson peel and does anyone know a source for Cyastat SN ?
Elvanol is on chemical store and everything else is amazon just can't find Cyastat SN
 
I also use Rushton's formula. I have added an Enzyme step before US cleaning. I spray the Enzyme solution on the record, or get a fabric brush really wet, and use a lint and a bristle brush to scrub the record for about one minute. I think adding this mechanical scrubbing action to help loosen stuff in the grooves before US cleaning is a good thing. For Enzyme solution, I just switched to using a home made solution that I read about in a post. The solution is very simple: just mix the contents of one Nexazyme with one liter of water. You can get Nexazyme at Pharmacies or on Amazon.
I used to do a pre scrub with a discdoc brush but found no upside. What did make a difference was allowing the LPs to sit still in the US for a couple minutes rather than in continuos motion. I doubt any brush, even a record brush, can get down deep into the grooves. No bristles on any commercial scrub brush would be small enough in diameter. Even lint brushes won't get deep into a groove.

I switched to doing an after scrub / hard rinse following US with better results than when I did a pre scrub. I also find my Discdoc brushes do not wear out as quickly scrubbing an already US'd LP.

I've recently built USRCM with 80 kHz US clean and 80 kHz US rinse tanks and a heated, filtered drying cube

Not sure where I read this but I thought 80K was more likely to cause cavitation o vinyl, especially some of the softer formulations. Also a drying cube absent a vacuum may not add much to the process other than speed drying. The vacuum and then into a drying rack for an hour or so sucks out debris if left behind and also removes swirls and water marks.
 
Not sure where I read this but I thought 80K was more likely to cause cavitation o vinyl,

Perhaps your referring to damaging effects of the cleaning process @80 versus 40K since basic cavitation is the cleaning
process.

As to using US running @ 80 I thought the subject was put to rest regarding damage occurring on records.
A smaller cavitation with the higher freq seems IMO the way to go other than the increased cost of the units.
 
Status
Not open for further replies.
Back
Top Bottom