Remote volume control

[njcanuck]

I use a Sansui RS-100 to remote control the volume on my HT system. I picked up two of these for less than $15 each on ePay. Make sure you get all three components. More info and pics in this thread: http://www.audiokarma.org/forums/showthread.php?t=363596

 

[luxmaster]

Old thread. Was going to start a new one but I finally made a volume box and it works great. Much better then connecting a pre amp volume control

 

[Aerobat]

I built a Muses chip-based volume control, details are on DIYAudio.com. It has an optional programmable IR receiver and digital readout.

 

[nbarber]

This is the guts of the passive remote volume control I built a few years ago. It integrates into the tape loop, not ideal but I noticed no audio quality degradation.
The board is mounted in a hobby enclosure with an external power supply. I had to relocate the infrared sensor and LED to be visible but other than that it was a simple as wiring in RCA's for input and output. It works great and can easily be taken out of the signal chain for "critical listening".

Amazon.com: SENECESLI Dual Channel Preamp Module with 100K Potentiometer | Dual Channel Design, 100K Volume Pot, Remote Control, PCB Circuit Board, DIY Audio Project : Electronics

Amazon.com: SENECESLI Dual Channel Preamp Module with 100K Potentiometer | Dual Channel Design, 100K Volume Pot, Remote Control, PCB Circuit Board, DIY Audio Project : Electronics

a.co

 

[luxmaster]

I built a Muses chip-based volume control, details are on DIYAudio.com. It has an optional programmable IR receiver and digital readout.

I thought there would be something you can buy like a box already made but everything is DIY still. Parts are available but im surprised a company has not made this thing on a professional level yet. I bet there would be lots of interest