• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Sta-2100

rito25

Super Member
I got a realistic sta-2100 for $8. What can you guys tell me? I know its TOTL.
Where can I get LED's for the aux and stereo lights? What about knobs?
attachment.php
 
Last edited:
Register to hide this ad
Very well built, decent tuner, sounds good, sometimes can be a bit boomy sounding. For mine it is in the loudness circuit, which kind of sticks on only one channel sometimes. Great deal you got, they're keepers. I've had issues with the wrapped wire connections and power button. The wrapped wire connections going bad and needing soldered, and the power button going bad.
 
Can you tell me where to get LED of the lights? Where to get knobs?

Search ebay for a broken donor unit that you can local pickup. The lesser models like the STA-2000 are a lot cheaper and usually have the same knobs and LED's. There might be models below the STA-2000.

EDIT: I just had a glance at your photo. I think the indicators are bulbs so you won't need a donor unit. The knobs pop up on ebay from time to time so you will need to be patient and vigilant.
 
Funny, I drooled for it when I was a kid in very late 70's to very early 80's. 120wpc into 8 ohms. 0.1%THD. I remember they were selling for about $600-$700 brand new.
 
You might get knobs from another receiver. Mine did not have any, but I got some knobs from another receiver from an AK member. As for the LED's, there actually indicator lamps. There rated at 60ma, 6 volts.

As about the unit itself, it is a powerful receiver with an excellent tuner section. The amplifier is very loud for me just pushing five watts of power. A bit heavy on the bass side, especially when the loudness button is pushed in, but can be tamed with an equalizer and some very large speakers like the Realistic Mach One.
 
I was think about driving Ohm walsh 4's with it. Would this combo work well?
could i get a manual and schematics for this thing?
 
Last edited:
I have the owner's manual and the service manual in PDF format, but you have to wait until tomorrow. I only have dial-up here at home and I have to go to the library to use their wireless network to upload you anything. Send me your email and I will put the files on sendspace so you can download.

You can try the Ohm walsh 4, it certainly would not hurt.
 
The STA-2100 is a very good receiver. Mine is driving my Dynaco A25's. I got lucky on the lamps and found them at my local Radio Shack which surprised me. The FM will only play in mono with the stereo lamp out. I had several issues with mine but worked through them all, one at a time. A quick search for the bulb spec here will help you track some down if you can't get them locally. The controls will definitely benefit from a good deoxit cleaning. Check the fuses on the power board. I had a bad one.

I asked a question about the occasional boominess that is sometimes brought up regarding this receiver. The consensus on the Realistic discussion forum is that it seems to be built into the preamp section. Depending on the type of music and speakers that you use, it may not even be noticed. I listen to a lot of acoustic folk, bluegrass, etc and I am very happy with my current setup. The bass and treble have a turnover button that can be used to limit the frequency range of the tone control. I used it to back off the lower bass before I found my Dynacos but have not used it since then. I seemed to have found a happy spot with my speaker type and placement and even when listening to Reggae, the bass does not sound boomy or loose. I am very happy with my STA-2100 and hope that you will be too.

Congrats on your find. It is a great unit. Take your time going through it and enjoy it.

mark
 
Last edited:
I know it need deoxit, the buttons are staticiy and some stick a bit. Why does the receiver only play in mono with the light out?
Can it use MC cartridges?
 
Last edited:
I know it need deoxit, the buttons are staticiy and some stick a bit. Why does the receiver only play in mono with the light out?
Can it use MC cartridges?

The receiver will play any other source in stereo with the stereo indicator lamp out. It just plays FM in mono. The lamp is part of the FM stereo circuit so when it is out...so is FM stereo. I believe there are other receivers like this too.

You can use MM or MC cartridges but you may need to adjust the Phono 1 level switch on the back to try and set the input sensitivity level so playback matches the volume of your other inputs (FM, cd or whatever). There are 3 settings.
 
I didn't touch the lights at all, the just won't turn on when I turn the reciever on?
Did age just get them? Or did I deoxit something a wasn't supposed to?
 
It sounds like you may have blown a fuse. I had one blow after I replaced a lamp. There are 4 of them on the power board.
 
The protection fuse in the back has a black spot, does that mean it is broken?
And I think you are right, I antecedently looped the RCA speaker out ports.
What fuses does this thing use?
 
Last edited:
The protection fuse in the back has a black spot, does that mean it is broken?

It sure sounds blown to me. Do you have a multimeter that you can check it with? That fuse is heavy enough that you should be able to see it if it is fried.
 
Last edited:
Back
Top Bottom