• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

They are like $365.00 a pair so ya a bit pricey.
Yup, even higher for the 4 ohm version ($440), which is what the Double Impacts are. I was willing to pay that for the Pendragons, but not with the higher priced Double Impacts. I'm sure we'll all be very happy with the standard or Clarity caps. I know with the Pendragons, the Mundorf caps are field replaceable. I wonder if that is true with the Double Impacts, in case someone decides to add them later...
 
I heard a local pendragon set with the mundorf caps and couldn't tell them apart from my set with clarity caps. Granted different room/amp/pre/source but to my ears they didn't have anything I could pick up that was different enough for me to go with them.
 
I heard a local pendragon set with the mundorf caps and couldn't tell them apart from my set with clarity caps. Granted different room/amp/pre/source but to my ears they didn't have anything I could pick up that was different enough for me to go with them.
Thx Calestus, I've been wondering if there would be a noticeable improvement and my wallet is glad to hear there isn't! :)
 
"P.S. I've also been using a Herbies mat on my turntable, for several years. I've tried anything and everything to help with my magical vibrating floors."

I get that. I have a TT that is unplayable - I need to mount a wall shelf. There's not a mat or isolators or marble slabs going to make it better. Luckily, my other TT is much more tolerant....
 
Thanks guys. Unfortunately, one dedicated room is all I can get away with at this point, so the Pendragons will be for sale as soon as my Double Impacts arrive.

I would love to one day convert my garage into a dedicated music room, with a mini split for the AC duties. That's exactly what I used to have at our old house; 400ft2 of music pleasure and a projector. Now my room is smaller, no more projector, and..upstairs...But I'm not complaining because I have Double Impacts on the way!

P.S.
Bob, that's a good idea and I hope it works well for you. I tried a wall-shelf about a year ago, but it made a bad situation worse. Apparently the damn walls vibrate worse than the suspended floors, lol..
 
Last edited:
I heard a local pendragon set with the mundorf caps and couldn't tell them apart from my set with clarity caps. Granted different room/amp/pre/source but to my ears they didn't have anything I could pick up that was different enough for me to go with them.

I would expect that to be the case. I've played with boutique caps in crossovers and as long as the standard caps are of good quality differences can be infinitesimal.
 
Thanks guys. Unfortunately, one dedicated room is all I can get away with at this point, so the Pendragons will be for sale as soon as my Double Impacts arrive.

I would love to one day convert my garage into a dedicated music room, with a mini split for the AC duties. That's exactly what I used to have at our old house; 400ft2 of music pleasure and a projector. Now my room is smaller, no more projector, and..upstairs...But I'm not complaining because I have Double Impacts on the way!

P.S.
Bob, that's a good idea and I hope it works well for you. I tried a wall-shelf about a year ago, but it made a bad situation worse. Apparently the damn walls vibrate worse than the suspended floors, lol..
On the wall shelf, it must be mounted to a load bearing wall. Then you can jump up and down in front of it with no effect. Also improves bass and blacker background.

Russellc
 
On a different note, check out Eric's new Enzo

View attachment 823292
I always figured when the day comes that I decide to finally get some Tekton's I'd only have to decide between Pendragons and Seas Pendragons. Now, however, Eric is offering around 5 speaker choices all of which are right around the same $2,000 price tag. I guess I'll need to talk to him, eventually, in order to sort through all the the options. In the end it will be which choice is best in my 20x30 room for jazz and blues. Lucky for me I'm in no hurry as I really like all of my current speakers. The only problem, I see, is that by the time I'm finally ready to make a decision there will probably be another 5 or 6 speakers in that $2,000 range.
 
On the wall shelf, it must be mounted to a load bearing wall. Then you can jump up and down in front of it with no effect. Also improves bass and blacker background.

Somehow I didn't even consider the load bearing aspect when mounting my shelf before, just did it to a stud. But after knocking on some walls, I see what you mean. Thanks to you and Bob for reviving that idea. Looks like I have a new project now.
 
It sure took a lot of Owens Corning 703 to fill those bass traps!

No doubt. Will be interesting to hear how it sounds when you're done. You'll keep us posted.
 
Room is nearly finished and the audio system is all hooked up and sounds better than ever. This dedicated listening room is the single best audio investment I've ever made. The sound improvement is much greater than any component I ever purchased. The soundstage is wider, taller and much deeper. Imaging is amazing. Clarity is pristine, as if a veil has been lifted from my system. I knew my family room acoustics weren't very good, but didn't realize until now just how bad they were......and the few acoustical treatments I added were basically worthless. Upgrading components produced relatively small improvements compared to what the new room has provided......and I'm not fully done with the room treatments yet! Many thanks to Steve Deckert of Decware for providing me with the inspiration, advice and plans for building this room. Quadratic diffusers on one side wall, back wall and ceiling, carpeting with padding, heavy velvet curtains on one wall and behind speakers, four floor to ceiling corner bass traps and foam acoustic panels covering the duct work and where the walls meet the ceiling were his suggestions and they work perfectly. I realize not everyone can dedicate a room purely for music listening but if you can I highly recommend it. New pics coming tomorrow.
 
I have a pair of Pendragons on order, so needless to say I followed this thread with great interest before making my decision. So many people have commented on Tekton’s speakers and compared different areas related to design philosophy, parts used, assembly methodology, cabinet bracing, etc, it is almost impossible to summarize them all. However, one area that I had hoped to see more on is amplification. And by that I mean high quality, but reasonably priced amps that make the Pendragons logical and worthy companions in their respective class. Like any speaker, its true music value can only be assessed through high quality amplification so I’m a bit surprised to see that topic being pushed to the back burner. What I have seen instead is mostly head-to-head speaker comparisons.

Connecting the Pendragons to a $200, $300, even $500 amp is as useless as connecting them to a $20K+ esoteric amplifier. In other words, feeding them baloney on one end and diamonds on the other is meaningless, misleading, and some may even argue, dishonest. A super high-end amp will deliver the goods and the Pendragons will simply filter out a huge percent of it because their internal components are by design so ridiculously mismatched. Likewise, a $200 amp from Ebay will deliver nothing but randomly concatenated noise so that is exactly what the Pendragons are going to broadcast to their listener’s ears. Debating the quality of sound under such circumstances is at best funny, and at worst, insane, IMHO. I’m not saying that people who post on this forum are doing this, but some “professional” reviewers out there certainly appear to be.

I don’t know what the Pendragons sound like as of this moment in my setting, but I’m going to find out soon. I’m going to give them a chance to be the best they can be by feeding them a high quality, clean signal in their appropriate range and let them convince me that I have made the right choice. Or perhaps a poor choice. We will see. Either way, it would be nice to hear more people specify what kind of amplifiers are being used when commenting on the Pendragons or other Tekton speakers so that average, not so technical readers like myself can have a meaningful reference point of some kind. Just my 0.02.
 
Last edited:
After numerous upgrades with various equipment, I've found that how much money you spend does not always equate to what you get. I've owned a number of amps; Pass Labs Aleph 5, Emotiva XPA-2, Classe CAV-500 and now an ATI 2007. The Classe cost $10K while the Emotiva was around $600. I did not find a big difference in the sound. I also recently went from a $2K Modwright SWL 9.0SE preamp to a $9K Cary SLP-05 and while the Cary was a noticeable step up, it was not huge. There are a lot of other factors that can effect the sound quality, including your room setup and the synergy of your equipment. Also, there are some incredible bargains out there in the form of high-end equipment that is not priced to the extreme.

I bought a pair of Tekton Double Impacts after a lot of searching on various audio forums. What finally convinced me to go with the Double Impacts was mac48025's reviews. He has owned many different speakers and was able to articulate his findings very well. I truly expect the Double Impacts to improve over my Polk LSI9s whether I run them from an Emotiva Amp or a $10K amp.
 
Connecting the Pendragons to a $200, $300, even $500 amp is as useless as connecting them to a $20K+ esoteric amplifier. In other words, feeding them baloney on one end and diamonds on the other is meaningless, misleading, and some may even argue, dishonest. A super high-end amp will deliver the goods and the Pendragons will simply filter out a huge percent of it because their internal components are by design so ridiculously mismatched. Likewise, a $200 amp from Ebay will deliver nothing but randomly concatenated noise so that is exactly what the Pendragons are going to broadcast to their listener’s ears. Debating the quality of sound under such circumstances is at best funny, and at worst, insane, IMHO. I’m not saying that people who post on this forum are doing this, but some “professional” reviewers out there certainly appear to be..

A lot of your assumptions around amplification are just plain wrong. Price alone does not determine quality. Design has a lot to do with it as well. There are expensive amps that sound worse than cheaper ones and vice versa. A property designed amp shouldn't remove anything from the signal and an amp producing randomly concatenated noise is not properly designed, is being driven beyond it's spec, or is malfunctioning. Anyway, this topic is a can of worms discussion so I will get off my soap box. :)

I've only got M Lores but I've had luck with most everything I've used to drive them with to reasonable spls. I've used: Teac A-H01, Nad D3020, Pioneer A-20, Onkyo A-9050, Parasound Z separates, Nuforce DDA-120, TPA3116, SMSL SA-S1, and Class D Audio SDS-470C. The little chip amps fall apart at high volumes but don't sound any worse at low levels. The power dac (nuforce) is super clear but sounds flat until higher volumes. For sustained 100db levels only the SDS-470C retained bass authority. At average levels of 80ish db all did well. Good luck on your new Pendragons!
 
IEither way, it would be nice to hear more people specify what kind of amplifiers are being used when commenting on the Pendragons or other Tekton speakers so that average, not so technical readers like myself can have a meaningful reference point of some kind. Just my 0.02.

I've owned both the original Lore's with the Audex Gold tweeter and now Pendragon's.

In both cases I haven't found them overly sensitive to amplification. The lores I tended to use with tubes at the time. My Cary SLA-30, a pair of PP EL84 monoblocks, Larry Moore 300B monoblocks and even a Rega Brio-R sounded great.

I would say they are transparent and you will hear the differences between amps, but any decent quality amp will sound nice. I think I prefer the amps that have a little extra power. 30+ WPC seems to give a little more slam.

With my Pendragons I've used my FULLY restored and modded Marantz 1060, a Sonnetteer Campion, Rega Elex-R and currently I run a Yamaha A-S801.

The Sonnetteer and the Marantz had more tone and sounded great. I didn't have a lot of time with the Rega, it was a catch and release cause I wanted something else and needed the funds. I run the Yamaha cause in my 2nd system it's feature set make it tough to beat. The 100wpc give plenty of slam and it sounds great. It is DEAD quiet... but it doesn't have quite the tonal richness of something like the Sonnetter. I'm trading a bit of sweetness for DAC, Remote etc...

But again, in my experience with Tekton speakers, I don't find them as sensitive to amps like other speakers I've owned. They do sound better with better amplification and will reward you for quality. I guess if I had to pick, I'd go with solid state of 50wpc or more that errs on he warm side of neutral and is good with tone. Parasound would be a good match I think. Or something like a Croft Phono Integrated could be awesome with its hybrid design. I would avoid class D. They seem dry and lifeless with transparent Spekaers like the Pens IMO.

In my main system I use a tube preamp with SS power. If my Pendragons were my main system I'd probably go the same route.

- Woody
 
I will concur with many here.......price spent on a component doesn't necessarily equate to sonic performance. I've had $15,000 amps that didn't sound any better than my current $3,600 integrated amp. Tekton speakers are a great example of that as they better than most big name speakers costing many times more. I've found Tektons not to be fussy regarding amplification. I've used 10 watt vintage tube amps to 200 watt solid state Odyssey Kismet Monoblocks ( which produced insane sound levels) and have settled on a 20 watt Raven Audio integrated tube amp......at least for now ;) Eric prefers huge solid state amps to drive his speakers while I prefer small tube amps. It's all about your preference in sound. My experience is that Tektons will give out what you put into them without coloration so just choose an amp you like and the Tektons will reward you with whatever sound that amp provides. My Raven drives my Double Impacts easily and produces plenty of volume and I'll be driving my new Lore Reference with a 150 watt Proceed solid state amp in a small home theater system.
 
I have mostly used solid state amplification, sometimes front-ended by tube or hybrid designs of varying wattage. In my experience, by far the greatest determinant of audio quality comes from the choice of transducers, at both ends of an audio chain. Cartridges with turntables (and other equipment, such as DAC choices) at the source end and speaker components at the target end are the primary factors in what is heard by the listener, IMHO. That being said, synergy is what everyone chases, and smaller increments of improvement or degradation can be found in the amplification process, so this is where experimentation and information gathering can help to find just the right type of sound you are looking for, which may or may not be the most measurably accurate.
 
Back
Top Bottom