• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

I was asking if spending the money improved the speakers. If it made a quantifiable difference, it could be a worthwhile upgrade to any speaker. If it does not improve the sound, it might not be worth the extra expense.

No need to get all worked up just because I am curious if an added expense improves the sound of a speaker.

Well, what you said was "does it add $125 in value," which I took as sarcasm. It was in response to Dave who chimed in after you said "Yes, but they don't cost $16.34 each," which was directly related to price. My assumption is that you have a problem with how much they cost far more than if they work or not — since two of your posts in a row were questioning the price.

For me it's knowing I've done everything I can to optimize the equipment I have. I want to hear the speakers at their best. I've owned the original Lore's, a small early pair of Tektons for my desktop which used a Fostex driver, and now the Pendragons. With the Lores, spiking them cleaned up the low end immensely. The bass was so overwhelming at first in the room they were in that I added the spikes and then moved them about 6" further from the wall to achieve balance. Spiking most definitely helped. With the Pens I have wood floors. I have them spiked and on top of the "pucks" the spikes came with. Both cases helped tighten up the low end of the speakers.

My experience with Herbie's Lab products doesn't relate directly to any of my Tektons, I used Herbie's spikes and gliders on my Salk Songtowners, and now I use the gliders under the spikes on my Philharmonic 3's. They do a good job and I don't find myself wondering if I could do more. I partially pay for peace of mind.

- Woody
 
Personally, I own a very revealing all tube system and usually average 2-3 LP's a day, every day. Needless to say, I am very familiar with every little nuance of sound my system produces.

That being said, I have heard a positive difference in the sound my system produces when using Herbies' isolators. I actually got his prototype/first pair of Giant studded gliders (for my Pendragons), and immediately heard an improvement over the smaller ones. They are not simply expensive "floor-gliders". If you are using a decoupling approach to system isolation, you can't do much better than Herbies, in my opinion. However, due to the continuous battle with my suspended flooring, I am now experimenting with the coupling approach, and using huge brass Mega-feet from Mapleshade/Eden Sound. I am finding that Herbies' products are very much on par with these monolithic footers, despite being a fraction of the cost..Hopefully this mini-review is somewhat helpful.
 
Thanks CBones. Lots of ways to skin the isolation cat. Herbies stuff get great reviews. I've got one of the TT mats. Works for me. Yet to try the isolation products - I'm still messing with hardware & felt pads.
'
 
I too am using Mapleshade and Herbie Audio Isolators and am happy with both. I can't say I hear big sound improvements with either but I attribute that mostly to my poor room acoustics. When the new room is done ( one more week ) I should be able to discern their sound improvements.

On a different note, check out Eric's new Enzo

image.png
 
I too am using Mapleshade and Herbie Audio Isolators and am happy with both. I can't say I hear big sound improvements with either but I attribute that mostly to my poor room acoustics. When the new room is done ( one more week ) I should be able to discern their sound improvements.

On a different note, check out Eric's new Enzo

View attachment 823292
That's a very cool look! I guess Eric really likes the seven tweeter array!
 
I don't believe so. This what drove me to buy the Lore Reference rather than the larger Lore's, Enzo's etc, my room is a similar overall size to yours at 13 x 13.5, and even given the 'mid tower' size, they do still 'appear' fairly large, mostly due to width and depth, not height. However, due in part to their high sensitivity they play very well at low volume and have a really nice clean crisp sound with just enough low end to play on their own without a sub. Don't forget also since they are front ported they can be place very close to the front wall. This will reinforce the bass so experimenting just how close or far from the wall is key.

Will the speakers in your room be placed on the short wall or the long wall? Where is your MLP/PLP in regards to the walls and speakers? I also see you have plenty of vintage gear, i think these Lores sound fantastic with vintage amps. I have an old Kenwood integrated (the one in my sig) that i fire up once in while, it gives a slightly warmer and fuller sound than my other gear but it is far from perfect, really needs to be recapped. I would love to hear your thoughts/opinions about the vintage gear you have, i've been eying Sansui's lately myself.

Anyways, for the ridiculously low price of the Lore Reference, they are a fantastic speaker.

Thanks for the feedback - finally pulled the trigger and I'm pumped. They will be on the short wall and I'll be about 12 feet from them. Haven't updated my sig but I have some older McIntosh gear that I'll likely be using. The Tandberg and Marantz 2230 sound really good too, I'm looking forward to new toys. :)
 
Thanks to this thread, I pulled the trigger and ordered the Double Impacts today. I opted for the dual-binding post and Jantzen inductors. I don't think Eric could be any nicer. I love the fact that he is so extremely passionate and proud of his work. He has to know that he could be selling these babies for a lot more money. I'm upgrading from Polk LSI-9s and I'm hoping these are a huge improvement. My living room is only 22 x 12 foot, it will be interesting. I want to thank everyone in this thread who reviewed gave feedback on the Double Impacts. After reading this thread, the choice felt like a no brainer.
 
Thanks to this thread, I pulled the trigger and ordered the Double Impacts today. I opted for the dual-binding post and Jantzen inductors. I don't think Eric could be any nicer. I love the fact that he is so extremely passionate and proud of his work. He has to know that he could be selling these babies for a lot more money. I'm upgrading from Polk LSI-9s and I'm hoping these are a huge improvement. My living room is only 22 x 12 foot, it will be interesting. I want to thank everyone in this thread who reviewed gave feedback on the Double Impacts. After reading this thread, the choice felt like a no brainer.
Hi Jimbo1960, out of curiosity, what are the Jantzen inductors for? Are they only needed as part of the dual binding post option?
 
I'm fairly sure they are part of the crossover circuitry. If you email or call Eric he will gladly tell you. I had read others getting the upgrade and figured I'd kick myself later if I didn't get it.
 
I'm fairly sure they are part of the crossover circuitry. If you email or call Eric he will gladly tell you. I had read others getting the upgrade and figured I'd kick myself later if I didn't get it.
Do you know if the dual binding posts are to allow for external crossovers and bi or tri-amping? I ask because the only upgrade I know of is the one that includes the silver internal wiring, Cardas binding post and Clarity caps. I hadn't heard of the Jantzen inductors, but they may be part of that package.
 
Yes, usually the dual binding posts are for bi-amping. I may have to call him back and see if I missed any upgrades. I'd be more worried about the caps than the wiring.
 
The call I've been anticipating for a month finally came today, at about 5 o'clock Eastern time. "Your Double Impacts are ready and will be shipping out tonight"! I have to say, that was the best phone call I've gotten in a long time. Apparently, it took so long because the tweeters he uses were held up in customs for almost a week, and it backed the production up, in case any other, more patient, buyers were wondering. But they should be here mid next week, and I'll definitely post my initial impressions.

P.S. I've also been using a Herbies mat on my turntable, for several years. I've tried anything and everything to help with my magical vibrating floors.
 
Yes, usually the dual binding posts are for bi-amping. I may have to call him back and see if I missed any upgrades. I'd be more worried about the caps than the wiring.
Good idea! After you call him, would you mind updating this thread so we can all get on the same page with the upgrade(s)? Thx!
 
The call I've been anticipating for a month finally came today, at about 5 o'clock Eastern time. "Your Double Impacts are ready and will be shipping out tonight"! I have to say, that was the best phone call I've gotten in a long time. Apparently, it took so long because the tweeters he uses were held up in customs for almost a week, and it backed the production up, in case any other, more patient, buyers were wondering. But they should be here mid next week, and I'll definitely post my initial impressions.

P.S. I've also been using a Herbies mat on my turntable, for several years. I've tried anything and everything to help with my magical vibrating floors.
Congratulations!!! So, your pair took about 6.5 weeks from order to shipment, even with the delay. Not bad! Are you planning to keep the Pendragons? Maybe in a home theater or another room?
 
I wouldn't get the dual binding posts as bi-amping is of little value unless there's an easy way to bi-pass the passive crossover and go active. And in most cases there isn't.

Eric is a believer in less complex crossovers and his standard caps are fine.

P.S. bi-wiring may add a nice cosmetic touch but that's all.
 
Last edited:
Glad to see the Double Impacts are finally being shipped. One person I know ordered his days after I ordered mine and had to wait 6 weeks from ordering to shipping. I was very fortunate and only had to wait 3 weeks.
I went with Clarity Cap upgrades in the crossover, the dual binding posts for bi wiring ( not sure if they are bi amp able though), the silver coated internal wiring and the Mercedes Diamond Black paint. I was willing to go with the Mundorf Silver Oil Caps but Eric said the Clarity Caps or his standard caps are plenty good. The break in period was longer for the Double Impacts than my Enzo's. I'd say a good 100 hours with 200 hours sounding very good. Not sure if that's due to the different caps or the more complex 4 way crossover design......but it's well worth the wait.

I'm ordering either the Lore or Lore Reference for my small theater system this week. After three pair of Tekton speakers in the last two years I guess you can say I'm a fan. The Magnepan 1.7i's and Legacy Focus SE's I bought in the same time period found new owners that are extremely happy with them and even though I lost some money in the process of buying and selling those speakers, I've learned unequivocally that Tekton speakers are for me.
 
Last edited:
Welcome to the forum Audio Gorn and congrats on your new purchase. It's always dicey buying speakers you haven't heard, but rest assured that if you like your Lores you'll be floored by the Double Impacts. Not that the Lores aren't good, the Double Impacts are that much better.

Great looking system. I think you'll want to place the Double Impacts further apart than you have your Lores, they are physically and sonically big! Drop in anytime and let us know what you think of the new speakers when you get them. Be patient, it will probably take longer than promised to get them, I personally know of 3 others that have ordered them and when mine shipped,there were many orders ahead of them. Luckily they are worth the wait.
 
I too am using Mapleshade and Herbie Audio Isolators and am happy with both. I can't say I hear big sound improvements with either but I attribute that mostly to my poor room acoustics. When the new room is done ( one more week ) I should be able to discern their sound improvements.

On a different note, check out Eric's new Enzo

View attachment 823292
May have to try a set of these new Enzos, I don't see these on his site yet...I cant tell from the picture, but are those the SB type tweeters or the ones used in the standard Enzo?

Russellc
 
Glad to see the Double Impacts are finally being shipped. One person I know ordered his days after I ordered mine and had to wait 6 weeks from ordering to shipping. I was very fortunate and only had to wait 3 weeks.
I went with Clarity Cap upgrades in the crossover, the dual binding posts for bi wiring ( not sure if they are bi amp able though), the silver coated internal wiring and the Mercedes Diamond Black paint. I was willing to go with the Mundorf Silver Oil Caps but Eric said the Clarity Caps or his standard caps are plenty good. The break in period was longer for the Double Impacts than my Enzo's. I'd say a good 100 hours with 200 hours sounding very good. Not sure if that's due to the different caps or the more complex 4 way crossover design......but it's well worth the wait.

I'm ordering either the Lore or Lore Reference for my small theater system this week. After three pair of Tekton speakers in the last two years I guess you can say I'm a fan. The Magnepan 1.7i's and Legacy Focus SE's I bought in the same time period found new owners that are extremely happy with them and even though I lost some money in the process of buying and selling those speakers, I've learned unequivocally that Tekton speakers are for me.
Yeah, those Mundorf caps are a bit pricey. Eric didn't mention them and I didn't ask! :)
 
Back
Top Bottom