• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Are these North American models? Never seen one on the other side of the pond.

Now for my Rosedales, I had this Leak Stereo 30 Plus amp professionally serviced. Oh my...

What a match! The amp has better specs now than when factory new 52 years ago but... WOW. What a creamy, full bodied sound.

View attachment 2279534

I don't know if they are or not, I am still learning about them.
 
Was listening to The Essential Chet Atkins, but the that upright bass on Boo Boo Stick Beat sounded pretty good. I lost the purple tweeter on one yesterday while transporting them to the house, grille cloth was off and I didn't notice the tweeter cover was not screwed on. Wind must have blown it away, I backtracked but didn't find it. :(

I have got into the habit of cutting cardboard covers for the speakers whenever I am moving or working on them.
 
Last edited:
Can anyone ID these interesting Wharfedals?
Not a super 3 tweeter and upward firing bass?


View attachment 2285846 View attachment 2285847 View attachment 2285848 View attachment 2285850 View attachment 2285851
No idea what model, but they use the same components as the 1970's vintage Rosedale with the exception of the additional purple jellyfish tweeter. I see this model listed now on e-pay with a $200 opening bid. It is certainly unusual, but I don't see how that up-firing woofers can actually work with out some sort of port that redirects the bass energy forward. The other thing I wonder about is the clearance for the woofer cone travel.
 
These are the very rare W80A Variflex. This was Wharfedale’s answer to the Bose 901. They completely destroy the 901 sound wise. The only speaker Wharfedale made that was better is the Airedale.


 
Last edited:
The 2 driver ones
The 2 driver model was made about c.1960. They were an early bass reflex speaker as they used to call them. Their voicing left a great deal to be desired. There is software available now that you can use to tune the ports on these early ported speakers to make them sound so much better.
 
The really good thing about the W80A was you adjusted the speakers to work in your room, unlike the Bose 901 were you had to adjust the room to fit the speakers.

3C841DBC-A9CE-477B-9215-0A0776E5E370.jpeg
 
Been watching the W80 on eBay. As I suspected it is not selling. It is too bad. If the seller would ship them I would love to have them. Speaker wise the Veriflex uses the drivers out of W60D, and E.
 
Wharfedale Delta 70

I bought these from the original owner last night (who purchased them here in Chicago, he thinks about 30 years ago) for a nice price and they now making music in the basement system. I've fixed the loose grill cloth since the first picture was taken. They are in good shape, better than they appear in the pictures and just need a little cleaning up. Dimensions are 21 1/8" H x 11" W x 9" D. Woofer is 8" diameter. They aren't high-end speakers but they sound pretty good, at least to me. Not a lot of info online about these. My impression is they didn't sell many in the U.S.

Wharfedale1.jpg Wharfedale2.jpg Wharfedale3.jpg
 
I bought a pair of Wharfedale 505.2 for 15 euros.

Previous owner had probably been a chain smoker. whole thing smelled like smoke at home. And the gold logos were apparently yellowed by smoke. They are now silver colored.
There is water damage on one of the speakers. It probably has a houseplant on it.
It will then have to be repainted. Well, when is that going to happen. I don't know

EfVEPbTCeZwb9VOMO9Vs8kE8.jpg



But otherwise the speakers were okay.
Maybe some deterioration in sound.
But they are the best sounding speakers in my house.

The Wharfdales are controlled by a Marantz PM8000.
 
Maybe you should get a real turntable? :beerchug:

:biggrin: Define real turntable :D

As a matter of fact I have two sitting around: this Pro-Ject RPM 6.1 with Goldring G1042 cartridge/stylus (Gyger S tipped!) and a Marantz 6100 with multiple headshells (Pickering with Jico shibata stylus, an Ortofon F15E with standard elliptical stylus and one with a Philips 412/Mk II stylus. On and off with a Pro-Ject tube amped phone-pre in between.
:beerchug:
 
Wow, gorgeous tables! I'm sooo envious. So what kind of platter is on the one in the pic? Is it as heavy as it looks and did you have to change to motor too? Or was it factory built in that configuration?

Yea, just looked it up. Man, that's a real turntable :bowdown:

Yup, I'm quite fond of it! The platter is 6.5 kg MDF and topped with a vinyl insert, so it is heavy enough to absorb any motor vibrations.

IMHO record playing equipment basically boils down to 3 things: a good cartridge/stylus in correct setup - the clean record itself - a matching platter-interface in the form of acryl/vinyl. Anything else is just decoration. The more elaborate the form of the stylus (line tracking, shibata, Gyger, SAS/DAS etc.), the finer details are reproduced and the less wear on record/stylus.

I'm planning for an aftermarket vinyl mat to replace the only so so standard rubber mat of the Marantz. If I can find one of 5 mm thickness there's no need to alter any setup.
 
Last edited:
Hi all, I am embarrassed to admit I didn't see a Wharfedale thread! Should I repost this?
https://audiokarma.org/forums/index...dales-a-new-challenge-and-help-needed.969673/
If you search this thread you will find other people who have Dovedale W2's. I suggest you do this first to see what others have to say. You are in the right place as there are a lot of Wharfedale enthusiasts at AK. The US model of the of the Dovedale W2 is the W60 which is also a ported 2 way design.
 
for ease I will repost my original and add a few details:

Hi all,
I was lucky enough to pick up a pair of completely original W2's which have been the prized possession of an old chap (from new) until he recently died. They are immaculate externally, in oiled teak veneer cabinets, and I'm definitely going to restore them if I can. (do you agree?)

Both sets of drivers are still functioning, (after cleaning the wire-wound tweeter control) but the sound is harsh around the mid-range. You can hear the potential of the bass though, almost ethereal in its roundness. A very brief inspection reveals the insides are completely original. There are simple single-order crossovers with a choke and a cap, so I will start there with new caps. (any suggestions for brand gratefully received).

The chassis' are mounted from the rear of the baffle (I have not removed them yet) and from what I can see/feel the annulus rings on the woofers appear to be rubber, certainly not foam. The rubber feels quite stiff and I'm wondering if this is part of the problem. I'm confident enough to attempt new rings if they are available.

So I'm wondering if anyone has any experience to share, of these wonderful old speakers. I believe they are the first model and probably very early 60's. I have no idea how they would sound if fully restored, but it's got to be worth a go surely? Happy to receive any and all comments and advice.
Thanks.

I have since been inside properly and taken the attached shots. I have also read as much of the wharfedale thread as I can, but a lot of the photos and links no longer function which makes it difficult. Can anyone tell me anything more about specific model and or the drivers I have here?
The marking on the woofer cone looks like 3/67. The rubber suspension seems perfectly intact and as I don't know how stiff it should be all I can say is it moves well when pushed gently but it's stiffer than I would have expected.
The tweeter is a paper cone with felt surround.

I actually live in Wharfedale! At least, it's just over the hill. Bradford is close by, and I bought the speakers in Idle! So lots of provenances.
First thing I think I need to address is those caps, can anyone recommend exactly what I should get? The thread often conflicts... (get high voltage for quality/get low voltage to act as fuses/get oil filled/get metal etc). I would really appreciate some clarity. I'll be driving these with a Sansui 317, any comments on compatibility? I really appreciate any help. Thanks

 
Sadly it is so hard to find out any info on these Wharfedales. There was supposed to have been a fire that burnt up all of these records, something I have never been able to document. But what you have is roughly equivalent to the early State side W60. I also have literature from the mid 1960’s showing a W50 a 2 Way very much like your W2. I have never seen one for sale. Make no mistake these are primo speakers. My W45’s with their re-capped crossovers are astonishing. These are 50 year old speakers!

My advice is to replace the capacitor which appears to be an 8 mF non-polarized electrolytic with a similar NPE from Mundorf. I have used the German Mundorf E-Cap Plain on several of my Wharfedale’s including the W45’s with great success, plus they will not burn out your wallet. They make an 8.2 MF 70 VDC cap which would be perfect.
 
Last edited:
The WLS/12 ' Flexiprene ' surrounds on the woofer harden up with age and the only cure is to replace them. The Fs of this woofer, when new, was around 20 Hz. There is a cylindrical mass attached to the voice coil obscured by the paper dust cap. The combination of this mass and a stiff surround can result in a crease in the cone under extreme conditions of use; the crease if it has occurred can also cause midrange distortion.
 
The WLS/12 ' Flexiprene ' surrounds on the woofer harden up with age and the only cure is to replace them. The Fs of this woofer, when new, was around 20 Hz. There is a cylindrical mass attached to the voice coil obscured by the paper dust cap. The combination of this mass and a stiff surround can result in a crease in the cone under extreme conditions of use; the crease if it has occurred can also cause midrange distortion.
Flexiprene is a polyurethane material. Was this an early experiment by Wharfedale? All of my speakers have Butyl rubber surrounds and they are very supple and compliant.
 
Back
Top Bottom