• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Yamaha cdx?

I don't remember if this model has a laser locking mechanism underneath. Do check this. If not, you may have a dead laser.
 
yay i fixed it, kind of... I had alook at the assembely and put it back and the moto started spinning and seem to stuggle, when i took it apat i notice a bad solder joint and wiggled it, must of been that, i gave the laser a wipe and got sound!

The player is mint, looks brand new inside and out, pristine.
 
Okay, I'm still awaiting a response to back the claim of...was it bekim, I think...who says that laser works for the 1100u.

Because if it does, my ass is off to get one.
 
Because if it does, my ass is off to get one.

I think it's safe to go get one, but you have to remember it need's a real tech to mount it right. You can pop it in and see if it works, but the old units like the CDX-1100 can't do auto adjustments. That has to be done with a scope and a ridiculously expensive test cd (mostly made by SONY), not to forget the SM.
 
I think it's safe to go get one, but you have to remember it need's a real tech to mount it right. You can pop it in and see if it works, but the old units like the CDX-1100 can't do auto adjustments. That has to be done with a scope and a ridiculously expensive test cd (mostly made by SONY), not to forget the SM.

Thanks again!

May be awhile. Got demoted at work to part time status.

Whoo. Fun.
 
cdx-1110 after a good grease and clean plays cd's great now, it hates cheap cd-r and is hit and miss but im sure a good audio cd-r will be good.

But one thing i notice is that track 1 will show on the osd very low laser access but if the last track is played it goes straight to 100% or close, on track 1 it is spinning fast on the last track it spins very very slow, this is the same for every cd it loves the last track but not the first.

What does this mean?
 
I've just acquired a CDX-1100. I've been testing it and have a couple questions that I would appreciate a little advice on.

1. The transport has plastic gears to move the tray in and out. These gears have not a shread of grease on them. Would that be ok as they are not metal, or should I apply some grease? If so, what grease is best.

2. The adjustable volume when cranked up to full causes the right channel to sometimes crackle on notes with a lot of bass. Doesn't do it on the left channel. If I turn it down to about 3/4 volume and push the amps volume up instead, then I notice the crackle is gone. Does this indicate something is on it's way out or could be dirty in the player?

Paul
 
Cdx-1060

Hi guys,

Reading through the threads though cant really find the info i need.

Basically is the Yammy CDX-1060 any good, both quality & sound etc.

Will be coupled to my CA-1010 and Ditton 25 speakers.

any info / thoughts appreciated - Thanx again
 
Last edited:
Oh yes, the CDX-1060 is a great player. It is an improved design based on the CDX-1050 as I know it and it was the last of the line of monster CD-P's from Yamaha, it was sold from 1992-94 (only later players in that league was the EU model CDX-993 and the new SACD players CD-S2000/1000) .

Freq. 2-20.000 Hz +/- 0.3 dB
kirr and noise 0,0016% (1kHz)
Dynamics 100dB
S/N 120 dB (1kHz)

Dual DAC (S-bit Plus)
Class A analogue design.
MSRP $800
 
Oh yes, the CDX-1060 is a great player. It is an improved design based on the CDX-1050 as I know it and it was the last of the line of monster CD-P's from Yamaha, it was sold from 1992-94 (only later players in that league was the EU model CDX-993 and the new SACD players CD-S2000/1000) .

Freq. 2-20.000 Hz +/- 0.3 dB
kirr and noise 0,0016% (1kHz)
Dynamics 100dB
S/N 120 dB (1kHz)

Dual DAC (S-bit Plus)
Class A analogue design.
MSRP $800

Hi & Thanx Mandak

I have purchased this unit and waiting to pick it up. Cant wait. Are there any little service/maint tips that should be done before i rack it and put it in service?
 
Yamaha CDX-1030

Just brought this beauty home today along with the original remote. The camera flash has made the face look more gray than titanium:


DSC_1630.jpg
 
Just brought this beauty home today along with the original remote.

BB, cool find! I have always loved the Titanium series from back then. I have a full set of TI units that was my first full system, great memories. My full-line brochure (USA) that has your unit in it also had many TI CDX units (7 in total) all apparently sold at the same time, here is the list:

CDX-2000
CDX-1120
CDX-1030
CDX-930
CDX-920
CDX-730
CDX-530

I guess that was the best time for the CD format.
 
not wanting to hijack this thread... i have a yammy cdx-530 and from the symptoms im thinking a lazer replacemnt is needed,
origional is a (Kss210a) i believe and i have a kss210b in my hand right now..
is it possible this laser will work?
 
not wanting to hijack this thread... i have a yammy cdx-530 and from the symptoms im thinking a lazer replacemnt is needed,
origional is a (Kss210a) i believe and i have a kss210b in my hand right now..
is it possible this laser will work?

Instead of hijacking the thread, why don't you start a new one? You will probably get more responses.
 
Back
Top Bottom