• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

1219

  1. David Kojnik

    Dual 1219 platter wobble

    Any tips on fixing or aligning the platter? Platter has a slight wobble when you look down at it. No other issues noted. Thanks
  2. YachtRocker

    Dual 1219 Humm issue.

    I know this has been talked about before but I thought I would throw these questions out as I'm not quite narrowing it down yet. The Issues: When I power up the TT I can hear a humm, more on the left then right, I can readjust the cart and sometimes is goes away other it doesn't. When I start...
  3. S

    Dual 1219 no sound except one moment on return

    I have a Dual 1219 that has given me mostly grief and occasional joy for many years. I was having issues with the headshell contacts slipping during playback, resulting in low hum and bad sound after playing a side. I replaced the tonearm wires and got good sound from one channel plus hum. I...
  4. K

    Restored Dual 1219 squels and hums

    Hi guys I just got my turntable up and running, but there is a problem, two actually. The first problem, is a low hum like a grounding issue, except it should be grounded properly, I kinda blame the hum on the cheap RIAA amp and cheap RCA cables. The second problem is that the turntable...
    • klodshans
    • Thread
    • 1219 dual dual1219 hum squel support
    • Replies: 11
    • Forum: Turntables
  5. YachtRocker

    Dual 1219 Catches when returning.

    My Dual 1219 has moments when returning the arm to the rest it will catch and stop around where approx song 2 would be at. When it does that and I try to ease it back to the rest stand there is something that the arm catches on and it will make a click after a moment then I can get it back...
  6. Djanvk

    Dual 1219 strobe in the platter question?

    I have a Dual 1219 TT and on the rubber in the platter there are strobe lines to set the speed. How do I use these? I have used strobe lines before on other TT's where you adjust the speed and the lines stop but I just can't figure out how to get this one to work. Thanks
    • Djanvk
    • Thread
    • 1219 dual strobe turntable
    • Replies: 7
    • Forum: Turntables
  7. Dual 1219

    Dual 1219

    Dual 1219 used with Dynaco SCA-35 and Sansui SP-20's
    • jleon92f
    • Media item
    • 1219 dual
    • Comments: 0
    • Category: Turntable Gallery
Back
Top Bottom