• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

3200

  1. S

    Marantz Audio Test and Repair Recommendation in Southern California

    Hello Everyone. This is my first post…so take pity on me but be kind! I have a Marantz 140 Power Amp, a 250 Power Amp, and a 3200 Preamplifier. The 140 and 3200 were in excellent cosmetic condition…but they required service due to failed capacitors (The 3200 was possibly NOS…in its original...
  2. ocdecio

    3200 Balance Slider

    I have a 3200 with a broken balance slider pot. I tried to get one off the bay but it isn't working as a balance pot should (it increases the signal when you go to either side, when it should keep it the same) so I don't think this is a proper balance slider. Do you know where I could find a...
  3. ocdecio

    3200 Bass Tone capacitor

    I am working on a 3200 and I noticed the right channel doesn't respond to the bass slider. When examining the board I find a ceramic capacitor instead of the green caps: I am not sure if this is what;s causing the issue but it is a heck of a coincidence. Anyways - what type of capacitor...
  4. ocdecio

    Model 3200 - Zener value

    The 17V zener on my 3200 power supply board is faulty. It is listed as WZ-177 (17V) and its replacement would be 1N5247B. It so happens that I have lots of 18V zeners 0.5w and I was wondering if the extra volt would create havoc in this model. I've seen cases like the 240 where it seems to be...
  5. S

    Best setup for Marantz 2325 and Technics SL-1200MK2

    I currently have a 2325 receiver I’ve been using with my Technics 1200 turntable, Marantz 5010B tape duck, and a Marantz CD-67SE CD player. Speakers being used are a pair of Celestion Ditton 100 and a pair of Celestion D10s. The receiver and turntable have been professionally restored but...
  6. greenflash

    Marantz 1070 instead of 3200 as pre amp with 140 power. Disadvantadges?

    Hi everyone I've finally laid my hands on a Marantz 140 power amp. Quite happy! For now i'm using it with a 1070 integrated amplifier as pre-amp. My final intention is to get a Marantz 3200 to drive the power amp instead of the 1070. But before making that investment I'm wondering if there...
  7. Richs_Trains

    Marantz 3200 Pre-Amp

    So, I ran out of open units to recap and I figured I do one of the pre-amps. I opened up a 3200 only to find that someone had already re-capped this unit, yea and boo. Good that it is done, bad means I have to find something else to play with. I do have a question. ...this unit has a 220uf...
Back
Top Bottom