• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

antiskate

  1. T

    Does too much tracking force really damage records?

    Hi I have a new turntable that doesn't have antiskate setting option (the antiskate is pre-set for the included Audio-Technica AT3600L stylus/cartridge) I replaced the default AT3600L with a Audio-Technica AT-VM95SH The Audio-Technica AT-VM95SH vertical tracking force is rated at 1.8 - 2.2...
  2. David Bright

    JVC QL-A7

    Hello ALL I just picked up the JVC QL-A7 and when played about halfway through the record skips. I tried 3 records and same thing happened, it is skipping halfway through the record. Any thoughts? fixes? Thank you for advance
  3. L

    Pioneer PL-550X

    I just bought a used Pioneer PL-550X turntable in almost mint condition and everything works great aside from the anti skate feature. I have messed with it quite a bit with no luck. I decided to look inside to see if something had been disconnected or it maybe had a worn spring and when I did I...
  4. ClayTune

    Please Help me optimize my New Turntables Counterweight and antiskate

    So, here are some pictures of my current counter weight and anti-skate settings. I am getting a little "muffle" on some vocals and some Sss Sibilance sometimes (maybe 20% of the time). The manufacturers recommended counter weight for this cartridge (the groove tool) is between 2.5 and 3.5, my...
  5. hotrodman21

    Anti-Bias Broken Pioneer PL-50 (EMERGENCY!!!)

    Hello All, I have a Pioneer PL-50 Turntable, the original, not the 80's reissue... As I was trying to align my cartridge, for the millionth time last night, I decided to "float" the tonearm, and try something I haven't tried messing with... The "Anti-Bias," this could also be referred to as the...
  6. Kahoona

    Yamaha YP-701 antiskate way off.

    This nice looking turntable has been sitting in the storeroom for at least six months and I wanted to get it working. I got a belt and set it up with a temporary low quality cartridge to see if it works. No I will not put it into use with that awful stylus overhang. It's just what I have to...
Back
Top Bottom