• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

binding post

  1. B

    2 Pin DIN Replacement on Canton Sub

    I picked up a Canton Plus B Subwoofer a while back on Craigslist on the cheap. The speaker connections are 2 pin DINs. I bought some connectors and wired them up, but a couple of the connectors don't seem to "click" in, and the connection is not great. So I am looking to replace them with a...
    • BM0127
    • Thread
    • binding post canton canton plus b din plug subwoofer
    • Replies: 1
    • Forum: DIY
  2. D

    Missing Binding Post in Vintage Dahlquist

    So I recently purchased a pair of Dahlquist DQM-9s for a screamin' deal. They're a bit of a project but I don't mind. I wanted to ask about this missing binding post. I have no hands-on experience with speaker restoration, but I'm doing my research and asking for help to make sure I do this...
    • DQ!
    • Thread
    • binding post dahlquist dqm-9 vintage
    • Replies: 16
    • Forum: DIY
  3. Gustavsson

    Marantz 22XX convert to banana plugs - 3D print

    I have created a 3D print file for anyone that wants to convert their Marantz 22XX from push/clip springs to accepting Banana plugs. Design is based on my 2220B. You will need binding posts, heat inserts, sandpaper and a solder iron. https://www.thingiverse.com/thing:5252289
  4. SameName

    Issue with binding post terminal

    I have a pair of Audioengine P4 (passive speakers) I use in a spare room. I have an issue where one of the speakers goes in and out. To get it to work again, I have to press on the binding post terminal. It sometimes will work for a few minutes until it goes out again. Sometimes I’d have to...
    • SameName
    • Thread
    • audioengine binding post fix-it issue
    • Replies: 5
    • Forum: Speakers
  5. mattsd

    G-22000 binding post upgrade

    I got a wild hair a few days ago and decided to see if it was possible to upgrade the binding posts on this thing to posts that would accept banana connectors, as I have a pair of very high end cables that have bananas soldered on I wanted to use with this. That and it's very convenient to be...
  6. C

    Spade Help for Realistic STA-2000

    Hey All, Long time lurker - first time poster. I've had an Realistic STA-2000 in storage for years - it belonged to by grandfather. My brief perusal of the forums leads me to think this should be a decent receiver - maybe not Sansui or Marantz good - but decent. Its 75 WPC. My Fiance had it...
    • CDG123
    • Thread
    • binding post chromecast audio music hall paradigm 11se rca cables realistic spade lugs sta-2000
    • Replies: 7
    • Forum: Solid State
  7. jozeppy26

    Pioneer HPM-100 Binding Posts Upgrade

    Boy oh boy was this far more of a project than I had anticipated! I had to add small spacers between the crossover and terminal plate to allow more room for the nut and washer to tighten against the soldering washer. All in all I’m super pleased. The original binding post screws had a ton of...
    • jozeppy26
    • Thread
    • banana plug binding post crossover diy hpm hpm-100 pioneer speaker
    • Replies: 8
    • Forum: Speakers
  8. Ds2000

    Need help!! Red and black plastic binding post shells.

    Try as I may, I cannot seem to locate a part, something I thought would be simple too. I need the red and black plastic shells which usually cover binding posts. Now the post itself is fine, the plastic came unglued and was lost. I'd rather not ditch the whole assembly just because of this...
Back
Top Bottom