cap

Hi There, audio lovers. I have a Yamaha CR-600 on my bench and have some questions maybe someone can answer. On the main amp circuit board, I see several non-polar electrolytic capacitors. Can I replace them with normal polar caps? On the circuit board I also see on one side of the non-polar...

I have a problem - picked up a CT-F1000, and upon closer inspection discovered that the spring-loaded spindle caps (the best I can describe them) are missing. The sleeves must have cracked (at least the one on the right has a hairline crack) and the spring and the cap popped off...:rant: I...

So on my 2245 that I'm getting very close to finishing now :D I got to the new LEDs ( Thanks Randy) and the front panel. I also got the AM/FM recapped and still need to cap the muting circuit. But, before the FM was washed out, weak and not very sensitive. The Stereo would light but not where...

Hey all, I have a 1060 that I basically got for free as the seller listed a 1060b in good condition, but send a 1060 in trashed condition. I was tempted to part it out since it is in such rough shape, but I have never done that and hate to destroy such a classic piece. So, I put it on the DBT...

I need to replace the 3 taller ceramic caps next to the power supply but i do not know what to replace them with. Please advise one of them gets hot fast even with the variac

My 2226B is starting to have some issues and I plan on recapping it. Is there a list of the needed capacitors or will I have to go through and count how many of each is needed? Also, any advise on going about this procedure is appreciated. It will be my first overhaul.

Hi All, First time posting here since one of my goals next year is fixing up this old Pioneer SX-950 amp that I received for free a couple months ago. Searching this site I was able to find the repair manual in addition to several other interesting documents and threads. Here is what is working...

Hey guys, Trying to re-cap my newly aqquired 4300, the existing filter caps are 20000uf 50v and the closest I could find that would fit was a 22000uf 50v. Is it okay to increase the filter cap to 22000? Just want to make sure before I change them out. As always ... Thanks Rich

Yesterday I received my copy of the Guanzo version 2.2 I've read a lot anout it already, but I haven't seen many solutions to many answers. I did find a schematic, but than again a schematic without power- and heater supply. Atleast now I know where to look if things go wrong. Here is the...

Hello. I recently obtained a JVC sea r7 equilizer looking under the cover everything looked clean except one of the power supply capacitors looked like hell. As you can see from the picture the cap did not leak from the top but it looks lumpy all over. Somthing I never seen before. When I...

Hey guys! I'm relatively new to this forum. I'm trying to rehab an old C26 Pre-amp. My father, who loved Jazz bought this system in the late 70's. Its my inheritance from him, that and a good sense of humor, and a love of old Jazz. I've taken the unit apart, and cleaned all the pots and...

Well friends, tonight I scored a pair of JBL D130 woofers. Sorry, I'm not home yet, but I'll post photos once in home. The previous owner was an older fella who passed. He cut the aluminum dust covers out because he claimed they sounded better that way. I'm interested in replacing them for the...

The two 4.0F Dayton caps with the .01F AudioCap Theta bypass, ready for tinning and installation in the 4311's 3112 crossover network.

The capacitor for the 4311 rebuild. Dayton 3.0 F with AudioCap .01 F Theta bypass.