• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

enclosure

  1. Fisher_KS-1_Speaker_1963 (rep3 A231).jpg

    Fisher_KS-1_Speaker_1963 (rep3 A231).jpg

    KS-1 sealed sides and corners
    • OTH
    • Media item
    • enclosure repair
    • Comments: 0
    • Album: Vintage Speakers
  2. S

    Advice on tuning for multiway

    Hello, I'm new to this forum, although have been reading a lot of posts on here, but now need to reach out for some specific help! I have been designing a system that is quite large, and am right about at the stage to build test cabs to take measurements from to then fine tune before the...
    • Sam Edwards
    • Thread
    • cabinet design crossover enclosure multiway sub sub bass tuning
    • Replies: 7
    • Forum: Speakers
  3. D

    First time speaker build.

    I've recently acquired a pair of 3 way speakers used by 2 generations in my family and hold sentimental value, Unfortunately the boxes are falling apart and there is no way to save them. Since it was not a calculated box, I needed to know the enclosure size and port dimensions for a BR enclosure...
    • DanielDsouza
    • Thread
    • ad12100 bass reflex enclosure new speaker build phillips
    • Replies: 9
    • Forum: DIY
  4. pixelriffic

    Can you identify this enclosure?

    I posted an image of an enclosure a while back and was amazed when a helpful person identified it. Here I have another orphaned enclosure, and would love find out what it's from. The opening is 4.5" 19.5" and the depth is about 12.5. The slight bevel of the front trim looks very Luxman like...
  5. J

    KEF 107 Upgraded Xover, Size and impact on speaker volume

    Having in mind to recap the crossovers of my kef 107, opening the cabs to have a look at the woofers crossover, i had the surprise (surpise might be an understatement, the shock might be more appropriate) of finding an upgraded crossover with Solen capacitors. The seller did mention that the...
    • Jpkwd
    • Thread
    • 107 b250 crossover damping enclosure kef kube sp1215 upgrade
    • Replies: 15
    • Forum: Speakers
  6. F

    Help with Console rebuild

    Hi, I have an old (appears to be late 60's) console that I'm updating with modern components and I need some help with equipment recommendations for the space available. I'm trying to do this on as small a budget as possible and still get reliable/decent components. I picked up a Denon...
    • flatpick13
    • Thread
    • console design diy enclosure recommendations
    • Replies: 1
    • Forum: DIY
  7. Illuminatis

    Frankenstein speakers

    Hello i have a pair of sony ssm f400h speakers and a ss-cn305 center i also have a pair of sansui active subwoofers i plan to pull all these drivers out and make diy speaker enclosures with the active subs built in. My question is if i plan on using the existing cross over in the 3 way towers...
    • Illuminatis
    • Thread
    • crossover diy enclosure
    • Replies: 2
    • Forum: DIY
  8. KeithA0000

    Tannoy Arden Mk2 drivers in a Mk1 cabinet

    So I have these Tannoy 3828 drivers in a set of huge custom cabinets. They're nice enough, but just way too big for my office. So I've been looking for a while for some Mk2 cabinets to put my drivers into - but I only see Mk 1 cabinets coming available. So, just wondering - has anyone here ever...
    • KeithA0000
    • Thread
    • cabinet enclosure speaker tannoy
    • Replies: 0
    • Forum: Speakers
  9. CK2III Cavalli Kan Kumisa headphone amp with wood and aluminum case

    CK2III Cavalli Kan Kumisa headphone amp with wood and aluminum case

    Cavalli Kan Kumisa (CK2III) headphone amplifier with high quality custom made wood (mahogany) / aluminum case. Can be configured for 230 V or 115V Epsilon 12 - DC protection and delay muting circuit Enclosure: Mahogany wood and aluminum with massive 3.6mm brushed aluminium front panel and...
    • mfspdesigns
    • Media item
    • amb amp cavalli ck2iii custom diy enclosure epsilon12 headphone kan kumisa sigma11
    • Comments: 0
    • Category: DIY
  10. M3 headphone amp with wood and aluminum case

    M3 headphone amp with wood and aluminum case

    M3 class A headphone amplifier with active ground and high quality custom made wood (mahogany) / aluminum case. With Sigma11 PSU (24V) and Epsilon12 circuit. Can be configured for 230 V or 115V Epsilon 12 - DC protection and delay muting circuit Enclosure: Mahogany wood and aluminum with...
    • mfspdesigns
    • Media item
    • amb amp custom diy enclosure epsilon12 headphone m3 sigma11
    • Comments: 0
    • Category: DIY
  11. Transmission line enclosure in Martin Speakers USA TRANSFLEX 2050

    Transmission line enclosure in Martin Speakers USA TRANSFLEX 2050

    I thought you might like to see the transmission line enclosure inside of a Martin Speakers USA TRANSFLEX 2050. I am putting in new 20 Gauge stranded wire harness, and a new network. You might notice the particle board internal chamber and real wood external on Fred Martin's Personal Pair.
    • mmartin0007
    • Media item
    • 2050 enclosure martin speakers transflex usa
    • Comments: 0
    • Category: Speaker Gallery
Back
Top Bottom