• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sa-9500ii

  1. J

    Pioneer SA-9500II Restoration/Overhaul

    Long time lurker, first time poster. Picked this up a couple of months ago and have been making steady progress fixing it up. Listing said it "survived" a housefire. I made it my mission to make sure that ended up being true. I got it for about $150 +shipping. I ended up tearing it all the...
  2. M

    Pioneer SA-9500II - Tingling Sensation when touching faceplate or lid

    Hi guys, I have had a beautiful Pioneer SA-9500II in my possession for a couple of weeks now. The amplifier was cosmetically in perfect condition although I could tell that it had been forgotten in a warehouse for many years. So I have cleaned it inside and out and adjusted the bias current. I...
  3. sean sweeney

    Pioneer SA-9500 ii rebuild protect thump fix!

    I've been dealing with this 9500ii thumping ever since I rebuilt the amp and recapped, from the protect circuit (also rebuilt with upgraded caps and transistors)! It seems the more efficient newer transistors in the protect circuit were staying on too long at shut down and coming on instantly...
  4. goldswimmerb

    SA9500II bias balance

    Hey, so I have an SA-9500II here where the bias balance is "off". One pair of outputs is reading 20mv bias while the other set is reading 40-60mv... I'm just trying to figure out how this would be possible, there's no audible (or visible) distortion on the scope either, but obviously something...
  5. S

    SA-9500 II re-cap and re-build, burnt resistor help, please?

    I am about to start working on this unit. Have a small problem though, I have two fuses burnt out on the EQ board. The two on the left hand side (with the board turned up) with the coverings on body and legs. Looking at the SM, the board I have and the board in the SM are slightly different...
  6. S

    Need Alternate SA-9500 BOM

    Hey guys, I was trying to order the SA-9500 BOM from mouser as I have 2 of them incoming (working on one currently, as well). Problem is, most of the Nichicon's on the list are out of stock with some not expected until Nov, Jan and Mar!! I do not want to wait that long to refurbish these...
  7. F

    I need help troubleshooting SA-9500 II

    New to this and not familiar with this amp so I could use some help please. This is my friends amp and it has been setting for a few years. There is no output other than static and the occasional popping sound from the outputs. The left side is worse than the right but no output from either...
  8. Ricktptman

    Seeking a speaker selector switch (or sub) for an SA-9500 II Integrated Amp...

    If you've had experience with this or have the part, please PM me. I think the same switch was used in the SA-8500 II. Thanks in advance...
  9. denniswilson

    SA-9500II Stepped Volume Control Question

    I have a Pioneer SA-9500II. I noticed that when I gently turn the volume all the way down to "infinity" before shutting the amp off, the knob can go one more half step beyond its "home" position and then rebounds back to its normal infinity stop. The knob and hex screw is secure. I find...
  10. pioneer sa-9500ii

    pioneer sa-9500ii

    pioneer sa-9500ii
  11. pioneer sa9500ii

    pioneer sa9500ii

    sa-9500ii and tx-9500ii
  12. pioneer stereo

    pioneer stereo

    pioneer sa-9500ii, tx9500ii, ct-f700
  13. Pioneer JA-R2S PL-71 RT-707 TX-9500II SA-9500II SG-9500 CT-F1000

    Pioneer JA-R2S PL-71 RT-707 TX-9500II SA-9500II SG-9500 CT-F1000

    PL-71 RT-707 TX-9500II SA-9500II SG-9500 CT-F1000 http://www.pbase.com/mpx/pioneer
  14. Pioneer TX-9500 II  SA-9500 II

    Pioneer TX-9500 II SA-9500 II

    http://www.pbase.com/mpx/pioneer
Back
Top Bottom