• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sx-1080

  1. J

    SX-1250 Bass & Treble Control Switches Question.

    The 50Hz Bass control switch (ACV-165) shaft is broken on my SX-1250. I'm am having trouble finding another one, but have found a 20Hz Treble control switch (ACV-168). My question is can these be substituted for one another? It appears the pin spacing is the same, they are both 102K, both are...
    • Jada95
    • Thread
    • acv-165 acv-168 bass control control switches pioneer sx-1050 sx-1080 sx-1250 sx-1280 sx1980
    • Replies: 3
    • Forum: Pioneer Audio
  2. Brivan

    AWE-092 & AWE-094 Swap?

    I have a Pioneer SX-1280 with a tuner board that was accidently crippled by me while working on the power supply board. I forgot to put an insulator between the power supply board (while it was pulled out for service) and protection board adjacent to it. The 13v regulator heat sink on the...
    • Brivan
    • Thread
    • awe-092 awe-094 sx-1080 sx-1080 tuner sx-1280 sx-1280 tuner sx-980 sx-980 tuner
    • Replies: 0
    • Forum: Pioneer Audio
  3. T

    SX-1080 Protection Board Lessons Learned

    Well I am done with the protection board. There are a few things it didn't fix and a few lessons I've learned. The replacement of the protection relay was not necessary as recommended. After I replaced it, I opened the old one. Not one sign of corrosion, pitting, burning, etc. It was...
  4. T

    1080 protection relay and switch cleaning

    Okay, I'm about to rebuild the protection board in my 1080 and I've always wondered about the one relay with the tape around it. Since I'm about to replace it, I decided to pull the tape off and found what appears to be magnets on either side of the relay, but not sure. What are they? I'm...
  5. T

    Before I Rebuild 1080 Protection Board

    Okay, I have two issues and I need some input before I just jump in and replace parts.... The first issue I have is when shutting down the 1080. Upon flipping the switch, the lights go out, then the FM indicator light lights up and goes out along with the click of the relay. The unit powers...
  6. Brett Becker

    Pioneer SX-1080 - No Delay Before Speaker Relay Engages

    First post ever on AudioKarma so be easy on me. :) There is one issue I can't figure out on a beautiful SX-1080 I'm working on. There is no speaker muting delay when you first turn on the unit leading to a nice pop and some impressive speaker cone movement. You can hear the two relays...
  7. ultrasparc

    SX-1080 - no soft start, instant on

    Hi I recently took my SX-1080 to a professional audiorepair shop, to get it fixed. The operation was to repair a broken print path on the power supply. In addition to this, they unmounted and cleaned the protection relay (I beleive it was the protection relay, that is connected to pins...
  8. SpaceBalls

    SX-1080 Equalizer suggestions

    I've been looking to pick out a graphic equalizer for my Pioneer SX-1080, but I'm not entirely sure which is most ideal. I've been eyeballing the SG-9500. Any other suggestions?
Back
Top Bottom