Fisher x100-3 power supply

[CORYK]

My schematic calls for a .01uf 600v "molded" capacitor c4. I cannot seem to find a molded cap in the parts catalogs. Any ideas as to what to use would be greatly appreciated. Thanks.

 

[Bob91343]

Don't worry about it. Any capacitor with the same electrical ratings will do.

 

[CORYK]

It's a non polarized cap according to the schematic, But has the white line mark on one end of its black body.

 

[larryderouin]

The only thing the line denoted was one side of the old cap was the outside for shielding IIRC. Use any poly cap of the same size voltage.

 

[CORYK]

The only thing the line denoted was one side of the old cap was the outside for shielding IIRC. Use any poly cap of the same size voltage.

Thanks Larry!