individual driver stats

[Bkphoto]

Trying to find ohm ratings and other stats on various infinity midrange drivers...anyone who has an RS II series with the 3 mids know the ohm resistance from one of them...?

thanks,

BK

 

[tomlinmgt]

I'm pretty sure all the 5" poly mids I've measured have been around 4.

 

[Bkphoto]

Hmmmm.....

i wonder what would happen if the polydome mids on a IIIa were swapped for the 5" poly mids...

its not that I don't like the domes, but I think its safe to say that those 5" mids are some of the best mid drivers that infinity ever made...

 

[tomlinmgt]

I agree, they are some very nice sounding drivers. And they age a HELL of a lot better than those polydomes. I'd say it's worth trying.

 

[slimpikkins]

The 5" poly mid driver is crossed over at around 300hz and 3000hz the 2.5" dome around 600hz and 6000hz in most designs.
Jim

 

[Bkphoto]

that was my next question...

 

[goodolpg]

5" poly mids in my RSM's are crossed over at 500hz and 5000khz if that helps any.
Just measured a couple pairs of 5" mids.
Small magnet pair--3.7 and 3.8 ohms
Large magnet pair--3.9 and 3.9 ohms

 

[Bkphoto]

thanks, yes that does help...