Newest JICO stuff

[JP]

The pulsed 10.8kHz tracks are left and right, while the 1kHz + 1.5kHz and 400Hz + 4kHz tracks are lateral.

 

[JP]

http://fidelisanalog.com/shure-ttr-103-data-sheet/

 

[JP]

10.8kHz Pulsed High-Frequency Test. Right channel only as my test record is warped so the left channel measurements would've been affected. I used the bandpass filter feature in Virtins MI and used the resulting RMS voltage to simulate a wave analyzer.

Jico
http://fidelisanalog.com/2019/03/31/shure-v15v-jico-zirconia-sas-distortion-measurements-part-ii/

cm/sec    distortion
15        0.37%
19        0.36%
24        0.42%
30        0.63%

VN5MR
http://fidelisanalog.com/2019/03/31/shure-v15v-vn5mr-distortion-measurements-part-ii/

cm/sec    distortion
15        0.39%
19        0.38%
24        0.38%
30        0.41%

 

[m.a.s]

I have a sas/z for my V15 iii and 1 for my m97xE.
I forgot to lower the stabilizer on the xE on an 12" 45rpm and it then had trouble tracking. I could see the zirconia has a lot of side movement?
Didn't show it with the V15.