• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

IButf they were all like the green one (alnico) I would grab them.

But they're free.... Worthwhile grabbing I'd have thought. Nothing comes up free here in Brisbane. I reckon those little Zenith looking ones would make great bookshelf sized OB's for desktop computer use.

Anyway, the appear to be gone. The web link doesn't resolve.
 
I have these 12" Charbonneau brand speakers. Cant remember how I ended up with them. Seems open baffle friendly. Anyone use these before? If so results?

upload_2020-10-22_13-43-7.png

upload_2020-10-22_13-43-44.png
 
Hello open baffle lovers, please support me: I wanna put my pair of Goodmans Triaxiom 1220C into the JE Lab Style open baffle. Knows somebody the exact built in sizes in MILLIMETRES (holes, etc)? My speakers are due to virus lockdown in other country, but I have some time to make the baffles, just I can't measure them! THANKS!
 
Anyone running the Emerald Physics and Bi / Tri amping using the Mini DSP ? I lucked into a pair of the 2.4 they sound great with the Passive cross over but all the Press says they sound quite a bit better when Bi-Amped

Anyone know of a thread discussing the same a link would be great
 
Anyone running the Emerald Physics and Bi / Tri amping using the Mini DSP ? I lucked into a pair of the 2.4 they sound great with the Passive cross over but all the Press says they sound quite a bit better when Bi-Amped

Anyone know of a thread discussing the same a link would be great

My experience has been that when bi-amping with an active crossover ( SET powered mains and SS powered woofers ) I lose much of the SET magic.

Bi-amping using the same active crossover and two class D amps gave me better results.
 
My experience has been that when bi-amping with an active crossover ( SET powered mains and SS powered woofers ) I lose much of the SET magic.

Bi-amping using the same active crossover and two class D amps gave me better results.

I understand the drawbacks and frankly will likely live with the passive it is just to easy to use a single amp (the wife would prefer as well) but I want to at least give it a shot. Walter did get back to me explaining the current crossover points are 200 and 1200 that will allow me to experiment some by going active on the bass with a SS crown XLS1002. as far as the top end goes I will keep my Quicksilvers hooked up to passive with the mids and tweets still connected. I do not use SET amps here any longer, I found with the Lii 15 a SET amp just did not have the BALLS to DRIVE the large cone providing the impact like a PP amp can. I find myself preferring the overall sound with the ability to hammer down and get realistic drum / bass impact these days
 
Went back to my Decware ZF15M (clones) single driver OB using the Lii Audio. powering them with my Welborne Star Chiefs 45 SET monos. I finally figured out how to get the height in the sound stage. I pulled them out into the room more. Now 6 feet off the front wall, 10 feet apart, & I set 6 feet away. No toe in firing straight ahead, the speakers just disappear. The artists are now 6 feet off the floor, stage is super wide & Deep with some aspects of various tracks having sounds as high as the ceiling. Height is the 1 bit of sound stage I have struggled with.
 
Ok, I replaced my Behringer KM750 power amp on the W15 woofers with a Crown XLS1002 so I could limit the frequencies the woofers were reproducing.

I can't remember what I set the low pass filter to however I've been blown away by how much deeper and articulate the bass is. Likewise the rest of the frequency range has become more detailed and textured with a big improvement in sound staging. The only downside is that it's now ruthlessly revealing of poorly recorded and / or produced music. That's not to say it's not enjoyable, just you hear it warts and all.

Then again those stand out recordings sound spectacular also.

So lesson learned. Never run a woofer full range :)
 
I still want to try a Crown XLS1002 with the Eminence Alphas. I wish the Crown wasn't so wide and it's not deep enough to set other gear on top. But that's pretty much the norm with pro gear that's made for rack mounting.
 
Went back to my Decware ZF15M (clones) single driver OB using the Lii Audio. powering them with my Welborne Star Chiefs 45 SET monos. I finally figured out how to get the height in the sound stage. I pulled them out into the room more. Now 6 feet off the front wall, 10 feet apart, & I set 6 feet away. No toe in firing straight ahead, the speakers just disappear. The artists are now 6 feet off the floor, stage is super wide & Deep with some aspects of various tracks having sounds as high as the ceiling. Height is the 1 bit of sound stage I have struggled with.

Every time I try push pull, class D or solid state amps with full range speakers I always end up reverting back to the SET amps. This week I had a nicely restored silver face Marantz driving the horns but it wasn't long before I replaced it with the APPJ/Miniwatt. I've seen Marantz amps like mine go for close to a grand but you can often buy the APPJ for $99 on sale at drop.com
 
I'd kind of like to hear the F15's, or F12's with my 805A based amp. I have a feeling 20wpc of SET would drive them nicely.
 
I'd kind of like to hear the F15's, or F12's with my 805A based amp. I have a feeling 20wpc of SET would drive them nicely.

Take the leap you wont be sorry, My 25 watt Horn Monos sound amazing and the Bass is very surprising even as a single driver on smaller baffles its very good on the larger Baffle like the ZF15M (decware) It is amazing

IMO a SET amp is too good to waste on bass woofers.

I would not use SET on a strictly Bass driver but the F-15 FR driver is a superb candidate for SET amps, My 2 wpc can drive you right outta the room and Bass is surprisingly good
 
Take the leap you wont be sorry, My 25 watt Horn Monos sound amazing and the Bass is very surprising even as a single driver on smaller baffles its very good on the larger Baffle like the ZF15M (decware) It is amazing



I would not use SET on a strictly Bass driver but the F-15 FR driver is a superb candidate for SET amps, My 2 wpc can drive you right outta the room and Bass is surprisingly good
I'm currently running a tri amped configuration with the 805A amp powering a pair of the Fast10's, an Elekit 8200R powering a pair of Great Heils, and a Crown XLS1000 running a pair of Ultimax UM10's. And, I can't justify building another pair of speakers right now. Otherwise I would. I'd still like to hear a pair someday though.
 
Back
Top Bottom