• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Please Post your Infinity speakers

Here's a pic of my most recent Infinitys. I nice set of Column II's from 1974-76. They came with the original glass tops. I refinished the cabs with wood rejuvinator and beeswax and had to refoam all 4 10" woofers but t was well worth the effort. I like them as well, if not more than my RS4's.

Very nice!

Not too many of these floating around the forum it seems.
 
I just bought a set of RS5001
post-25922-1165409331.jpg


only in the colour black, i will post some pictures when I got them refoamed
 
I'm a big Arnie Nudell era Infinity fan and particularly the brilliant EMIT tweeter. Been like that since I was a teenager when my hearing would reach 20KHz+ and I was able to really appreciate the EMIT's abilities. Never really could afford to feed the fandom until much later when eBay sellers had them for a lot less than they were new, then I watched for auctions within driving distance.

These images are fairly old, representing earlier setups. They still very well represent the speakers, though.

First is my home work desk with a set of Infinitesimal III driven by a Trends Tripath amp. I have 2 sets of Infinitesimal III.

Second is stacked sets of 6 Kappa, one of which I frankensteined together out of gutted cabs and spare parts. (Note the earlier generation EMITs.) This is actually my primary system and sits across the room from my desk, is running almost all the time. The system has changed a lot since that picture. It has a well built Core 2 Duo based audio server with an Empirical Audio Off Ramp 3 USB reclocker, a heavily modded Valab NOS DAC, KingRex Pre, and 2 Trends Tripath amps (the 6 Kappa are fed less than 8 watts max per channel). Audioquest VDM-5 silver digital coax and Diamondback interconnects, and a Ridge Street Audio Poiema USB cable. There are no phase issues between the speakers and stereo imaging is magnificent. The whole thing sounds absolutely awesome for an office system.

Third is the tandem 8 Kappa right after I acquired the 2nd set. The 8 Kappa system is currently out of service waiting for a better space to run them.

Fourth (and fifth) are of my RS 1.5. My first set of Infinity speakers purchased new (with the benefits of 'layaway' payments) in 1980 when I was 19 years old. The cabs and grills are in excellent condition except for spotty darkening from sun exposure and age related dryness of the veneer. I've never touched the veneer with a wood treatment but it's obviously due for it. The last time they were in service I put clear polyprop Watkins in them from someone's set of RS 4.5. The last photo is a defective unit sticker I discovered on one of the original EMITs. Finding it well into ownership was a brow-raising experience although the drivers always performed well. I've since swapped them for later, better EMITs. These are killer hard rock speakers with excellent pounding dynamics when run with a big amp. I bought an Adcom GFA-1 flagship amp to drive them and blasted them repeatedly with Rush and Van Halen vinyl back in the day. The RS 1.5 are currently out of service.

EDIT: Found the images of the RS 4.5. They turned out to be project speakers and are currently in a closet.

- Rand
 

Attachments

  • desk_set.JPG
    desk_set.JPG
    89.6 KB · Views: 110
  • IMG_2110rB.jpg
    IMG_2110rB.jpg
    66.3 KB · Views: 174
  • IMG_0356rB.jpg
    IMG_0356rB.jpg
    83.1 KB · Views: 129
  • IMG_1078rB.jpg
    IMG_1078rB.jpg
    92.4 KB · Views: 115
  • IMG_1072rB.jpg
    IMG_1072rB.jpg
    77.4 KB · Views: 82
  • IMG_0925rB.jpg
    IMG_0925rB.jpg
    92.6 KB · Views: 121
Last edited:
Here are 3 of my Infinity's.

IRS Beta's, QLS1's, and Ren 90's (right speakers shown only) RSIIIb's not pictured, but in another room. Actually the QLS1's are not in my possesion as of Friday (2-19-2010).
 

Attachments

  • IRS Beta  QLS1  Ren 90.jpg
    IRS Beta QLS1 Ren 90.jpg
    64.8 KB · Views: 197
Last edited:
Complete family of Kappa from 5 through to 9-IRS Delta/Gamma-Single Delta/Gamma center speaker.Kappa 6 and 8 along with the Delta/Gamma are in Brazilian Rosewood or Santos as other might know it and the rest are American Oak.
 
Last edited:
finally got to the end of this thread...about 2 years.

Then...i had a pair of
RSa, and since then i found another pair then a pair of RS7, Then a pair of RSe.

Finding two pair of M&K volkswoofers has helped in that they give the bookshelf speaks much needed bottom end.Not for the RSa though...they can handle more power than the mentioned subs...more to say but hey been sipping too much.


In any case? the only speakers ive refoamed are Infinitys! No wait, the smaller advents benefit the RSa and ive refoamed those as well. Combined sound is awsome to say the least.

BTW great read going through this thread!
 
Infinity WTLC

I just recently brought the Infinity WTLC's back into rotation for another listening session and they sounded the same as the last time. Very,very good:yes:
 
Last edited:
Here's a couple of pics of the RS4's and Column II's. Both have just had new grill cloth put on and the RS4's are now back to original with the "Red" lettering on the mid and tweeter face plates that match the crossover plates.
 

Attachments

  • 102_1907.jpg
    102_1907.jpg
    102.2 KB · Views: 93
  • 102_1906.jpg
    102_1906.jpg
    111.4 KB · Views: 263
Infinity Speakers

I have the Kappa 9.1s in the front with 7.1 as surrounds, and a Kappa center and a infinity speaker for the rear. I also have a Kappa ssw-212 sub (two 12 inch drivers 300 watt amp) on the left of the 9.1 and a kappa ssw-210 (two 10 inch drivers 250 watt amp) on the right of the 9.1. I bi wire the 9.1s with a Denon 5308CI. I love them.
Manny
 

Attachments

  • P1010073.jpg
    P1010073.jpg
    72.9 KB · Views: 67
Here's a couple of pics of the RS4's and Column II's. Both have just had new grill cloth put on and the RS4's are now back to original with the "Red" lettering on the mid and tweeter face plates that match the crossover plates.
I had a pair of the RS-4's like that some years back. I got them badly damaged from a pawn shop and rebuilt them. I never did have the grills, but they sounded great. The crossover blew out of one of them, so I sold them to a friend who had the time and knowledge to fix them up. I miss them. They sounded GREAT on stuff like Mannheim Steamroller or anything with a piano.
 
Back
Top Bottom