Post a picture of your turntable

[Gang-Twanger]

Yeah , a Dual base. I'll take better pics this weekend after some sanding & staining those patches

A Home Depot cork planter mat -- Works well IMO and helps the VTA

Thanks... I'm gonna' check it out and see. I've got the VTA about where it's supposed to be, but I had to improvise (Borrowed the rubber mats from 2 other tables, one being an old, flat Technics for the top, and I sandwiched a record in between, and it gives me a good 3-record height). It works though, and actually doesn't look half-bad (Technics made nice mats with hard, dense rubber). Between that and finding the sweet-spot for the antiskate with each cartridge, it's really helped pull this table into shape.

 

[tma888]

Did I post this yet? Luxman PD-277:

Very nice! I have the same too. I really like this table. Im planning on polishing the platter but I dont know how

 

[Jody Thornton]

Did I post this yet? Luxman PD-277:

Is your cart an Ortofon OM-20? I have this same table with an OM-5e (upgraded to an OM-10 stylus). As cheap as it is, it sounds great!

 

[tbminc]

Some beautiful TT's in here, here's my Kenwood 5070.

 

[Champ]

Here is my Pioneer PLC-1700 with custom tonearm board and a Jelco 750E 10" tonearm. It runs through a modified Parts Connexion PS Audio Pre with Crystal Cable interconnects.. Right now I am using a beautiful Sony 7065 receiver for power. I have turned into a vintage Sony lover Love this Pioneer though.

 

[jimreeves]

Here is my Pioneer PLC-1700 with custom tonearm board and a Jelco 750E 10" tonearm. It runs through a modified Parts Connexion PS Audio Pre with Crystal Cable interconnects.. Right now I am using a beautiful Sony 7065 receiver for power. I have turned into a vintage Sony lover Love this Pioneer though.

That's one beautiful Pioneer Champ! :thmbsp: Is that a Herbies mat on there?
Did you re-veneer the plinth?

 

[JBoots75]

Here ya go!

Nothing special but, I did have it reconditioned through the needle doctor and it plays well.

 

[Champ]

That's one beautiful Pioneer Champ! :thmbsp: Is that a Herbies mat on there?
Did you re-veneer the plinth?

It's a Herbies mat for sure and the table is original except for the arm board.

 

[krisjay]

Humble Project Debut lll with acrylic platter. I enjoy how the platter will take on the color of the vinyl, kinda fun.

 

[temaadaudio]

My latest Upgraded T/T and Arm a TemaadAudio TT3

 

[mikeferguson]

My humble TT - Technics SL-J11D
Belt drive linear tracker.

 

[dynamic73]

Yamaha YP B2 Solomon Walnut Finish
Audio Technica AT440MLA
Doobie Brothers "Toulouse Street"

This is what I'm presently rockin my music on.

 

[Bkphoto]

[/URL][/IMG]

 

[Resident]

My modded P1

Heres my little Rega

 

[choochin3]

My Elac Miracord 50H mkII
It took me a while to get the stacker spindles,but she is now complete.
A Pickering XV15/625e is installed,and sounds phenominal.

 

[Pio1980]

Recent pic of my latest project, VPI HW19 MkIII/ Eminent technology linear air bearing arm with A-T OC9MLa/II riding.

 

[wgb113]

Heres my little Rega

Nice plinth Resident! Tell us more!

 

[Cù Faoil]

Just about everything is home made here, including the turntable.

 

[Frank Sol]

Just about everything is home made here, including the turntable.

That is cool

Give us more details and more pics

Thanks !

 

[Cù Faoil]

TT was an experiment in using laminates of varying densities to decouple vibration and noise. Motor (Linn) is mounted to ply that is inside a box of balsa that is held in cutout in the top layer by silicone rubber.
Top layer is glued to lower layers with a thick rubber type glue. Bearing is Teres and platter was turned from 25mm acrylic by a local machine shop. Arm is an Acos GST-1 that my father bought in the 70s and still sounds superb. Cart is the 2M Black.