• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show me your workbench!

Looking good Ohighway!

Picked up a couple of desktop blanks at Ikea today.
The 40 x 24 in white is $5.99! Found a 60 x 30 in the as-is for 7.99.

Time to get to work!
 
My hideout

Here's where I do most of my work. Sitting on the stool puts me in the sweet spot between a pair of NS-690s behind me. Projects waiting are on the shelves on either side, though there are some pieces that are fine and just taking up space at the moment. Current projects get stored underneath while waiting for parts, or when I need the bench for something else.

I have plans to improve it... like a permanently mounted DBT, power strip or switched outlet just for "hot" tools - planning to use a timer, so that even if I walk away they only stay on for a max of an hour before shutting down automatically. I'd also like a set of jacks to easily hook up gear when trying it out... speaker inputs and source RCA for amps, speaker outs from another amp for testing speakers... etc etc. Lots of ideas...

Here's the picture.

IMG_20121103_230144.jpg
 
No space in NYC

Things are tight here in NYC. Solder pencil hanging from my right ear. Sorry for blurry pix, I was not wearing my glasses. :D
 
Last edited:
Such a tool ...

Ever wander off from a project and get distracted?

.

.

.

.

.

.

.

.

(what were we talkin'bout?) :D

Made this after leaving a bunch of irons and stuff on overnite ...

workbench_sign.jpg


I figure I'll eventually make it over to the toob and have an aha! moment.

Also works for other things - leaving the furnace on in the garage, sprinklers running, flossing (oopth! ah wath wondrin wath thath wath) ...
 
Does work count? I don't have a pic of my bench setup in the basement yet. I will get that up soon.

This is one workbench were I was testing some small boards I made.
IMAG0290-1.jpg
 
Does anyone have a good solution to keep small tools like pliers,cuters, pick's organized but within hands reach? I was thinking about a small pegboard but I am afraid that frequently used tools will still end up on the work surface. I have some ideas how to make a neat set up for my screw drivers.
 
Does anyone have a good solution to keep small tools like pliers,cuters, pick's organized but within hands reach? I was thinking about a small pegboard but I am afraid that frequently used tools will still end up on the work surface. I have some ideas how to make a neat set up for my screw drivers.

I have the perfect thing that I got on ebay a few years ago. It works great. I will get a picture of it tonight.
 
Does anyone have a good solution to keep small tools like pliers,cuters, pick's organized but within hands reach? I was thinking about a small pegboard but I am afraid that frequently used tools will still end up on the work surface. I have some ideas how to make a neat set up for my screw drivers.


Every place I've worked used a silverware organizer thingie for tools, picks, and alignment tools. Then a plastic food storage container with some soapy concoction to clean knobs.
 
I use a small metal bathroom washcloth rack with a piece of foam in the bottom. Tin cans are good too - you can put stuff in them or hang over the edge.

attachment.php
 

Attachments

  • Rack01.jpg
    Rack01.jpg
    124.9 KB · Views: 438
Finally clean enough to photograph

Finally finished one project and cleaned the bench so I grabbed the opportunity to take a pic.
 

Attachments

  • lab_photo_2.jpg
    lab_photo_2.jpg
    85.2 KB · Views: 290
Love the old Weller! That thing looks positively ancient!

What you mean "ancient"!?! It's probably about the same age as me. I prefer to think of it as "aging gracefully". :smoke:

Seriously, I love those old Wellers - they just keep going and going. Here's the rest of the soldering station. Different tips in the irons. These are my daily drivers.

attachment.php


I suppose you'd poke fun at my "ancient" variac, too. I kinda like working with vintage stuff as long as it was good quality to begin with.

attachment.php
 

Attachments

  • Rack02.jpg
    Rack02.jpg
    143.8 KB · Views: 455
  • Rack03.jpg
    Rack03.jpg
    148 KB · Views: 456
Nice bench! How many spectrum analyzers do you need?

I have one set up for very low frequency stuff and the other for higher feq. It is easier to have two mainframes than to swap the plug ins. Most of the equipment I got for dirt cheap because it was not working at the time. Luckily that old equipment was pretty easy to repair. Not like the newer stuff that is all micro-processor based with custom I.C.s.
 
Back
Top Bottom