• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Poutry, I asked a question in the tubes section which you chimed in on. http://www.audiokarma.org/forums/showthread.php?t=668324

After the recommendation of the paramours (I think) from you I decided I would build the paramounts. But as you mentioned a few posts ago here. The Bottlehead stuff seems to be getting really expensive. I have been thinking that I would be better off spending the money on used gear instead.
Here you recommend gear as inexpensive as $600 shipped new from china.
Should I take all this, in your opinion, that I should spend as much as I feel comfortable with buying quality used gear in 2A3 or 300B form to get what I'm looking for? I would consider the Yamamoto but the styling is not on cue with my liking. I could spend up to $2K but would be much happier at $1k and not have to save more to get there.
My plan now is to find retail places that I can hopefully go and listen.
I've got the Lores BTW
And thanks for your time.
 
The M-Lores are sweet. I LOVE mine. Everytime I sit down and listen to music, I ask myself, "Really, how much better could it get?"

So what are you using in your main system?

My main system is very different. I have been on the Klipsch bandwagon for a long time now as I really like their dynamics and clarity. I am not a big fan of their 3-way as I feel they get shouty and I get listener fatigue. I have the KLF-10s and have done the cap, tweeter and bracing mods on them. Great for rock and HT.

I still love them but after my experience with the M-Lore I am thinking about the Lore Ref or regular lore. The upstream models seem like they may compare to closely to the Klipsch so I am most likely not going that way. I did have the Zu Omen Defs for a while and they just could not pass the test of time... Not a big fan of the whizzer cone look either... The electronics behind the Klipsch are Marantz, Emotiva and Oppo. They did well with the test run of the M-Lores before they got reassignment in the bedroom.

Any one out there with experience with a head to head on the Lore Ref Vs the Lore?
 
Poutry, I asked a question in the tubes section which you chimed in on. http://www.audiokarma.org/forums/showthread.php?t=668324

After the recommendation of the paramours (I think) from you I decided I would build the paramounts. But as you mentioned a few posts ago here. The Bottlehead stuff seems to be getting really expensive. I have been thinking that I would be better off spending the money on used gear instead.
Here you recommend gear as inexpensive as $600 shipped new from china.
Should I take all this, in your opinion, that I should spend as much as I feel comfortable with buying quality used gear in 2A3 or 300B form to get what I'm looking for? I would consider the Yamamoto but the styling is not on cue with my liking. I could spend up to $2K but would be much happier at $1k and not have to save more to get there.
My plan now is to find retail places that I can hopefully go and listen.
I've got the Lores BTW

And thanks for your time.

I think the Bottlehead 2a3/300B are great deals used and you can often find them for under $500. They're usually over build by OCD guys using boutique parts. Builders take great delight in showing off their meticulous point to point wiring. Most hum very little but always ask the question.

Here's a link to Tube Labs custom builds. This guy is a fine amp builder.

http://www.tubeaudiolab.com/index.html
 
Only downside is that you'll probably have to deal with selling your Epos' shortly after. :D

I bet the NAD will sound great. I like your taste in gear... Nice system.

- Woody

Thanks...I do very much enjoy what I have put together, definition of system synergy.
 
Took delivery of a Brio-R today to pair with my Lore Reference for now. I do get a tiny bit of hum--see the long Brio-R thread for info--but I have to put my ear up to the speaker to hear it. I was worried that it might be a problem with 96db speakers, but seems it's about the same as others have described.

Compared to the Teac AI-2000 that it's replacing the Brio-R has just a bit more grunt and depth--it really just draws me into the music. Some of this is probably attributable to the phono stage as it does seem to extend detail at both ends. The overall effect is coherency. I'm enjoying the RP6 > Brio-R > Tekton Lore Reference so far.

A SET amp is something that I see in my future, but I'm beginning to learn about all the differences with tube gear. The nice things about the Tekton's is they play well with most amps. The Brio-R has been an amp I've been wanting to try because of it's excellent phono stage. I've enjoyed all the amps so far: TPA3116--excellent for lower volume listening, Teac AI-2000--most analytical, though still energetic and enjoyable, and the Brio-R--the most coherent and musical to my ears.
 
Took delivery of a Brio-R today to pair with my Lore Reference for now. I do get a tiny bit of hum--see the long Brio-R thread for info--but I have to put my ear up to the speaker to hear it. I was worried that it might be a problem with 96db speakers, but seems it's about the same as others have described.

Compared to the Teac AI-2000 that it's replacing the Brio-R has just a bit more grunt and depth--it really just draws me into the music. Some of this is probably attributable to the phono stage as it does seem to extend detail at both ends. The overall effect is coherency. I'm enjoying the RP6 > Brio-R > Tekton Lore Reference so far.

A SET amp is something that I see in my future, but I'm beginning to learn about all the differences with tube gear. The nice things about the Tekton's is they play well with most amps. The Brio-R has been an amp I've been wanting to try because of it's excellent phono stage. I've enjoyed all the amps so far: TPA3116--excellent for lower volume listening, Teac AI-2000--most analytical, though still energetic and enjoyable, and the Brio-R--the most coherent and musical to my ears.

souladdikt, I love hearing from you. I knew you had the Brio-R on the way and was interested in your impressions. I myself, did a 180. I placed an order with Louis over at Omega for some custom Supercharged 3XRS's but after further contemplation, I have decided to cancel the order. I have just been doing some real critical listening with my current Tekton M-Lores and I just LOVE them! And from everything I have read, the Lore Reference takes everything that the M-Lore does good and does it better. So I am going to order some Lore References, save $600 and no longer ponder my speaker choice. :yes:
 
souladdikt, I love hearing from you. I knew you had the Brio-R on the way and was interested in your impressions. I myself, did a 180. I placed an order with Louis over at Omega for some custom Supercharged 3XRS's but after further contemplation, I have decided to cancel the order. I have just been doing some real critical listening with my current Tekton M-Lores and I just LOVE them! And from everything I have read, the Lore Reference takes everything that the M-Lore does good and does it better. So I am going to order some Lore References, save $600 and no longer ponder my speaker choice. :yes:

Be sure to put the money you save toward a nice amp :D. I'm really looking hard at all the SET amp choices, though it will likely have to wait for a bit now that the Brio-R has arrived. Let us know your impressions when your speakers arrive. I'm curious how your M-Lores stack up to them.
 
I am going to try the Crown XLS-2000. For $250, it's not that big of a gamble. If I don't like it as a 2 channel audiophile amp, I will save it and throw it into a home theater system. Eventually I will end up with the Decware SE84UFO. I have had my heart set on that amp for the past couple of years.
 
And yes, I am VERY anxious to compare the M-Lore to the Lore Reference. Not many on this forum have had that opportunity.
 
Just today I spoke with Eric for a third time and placed an order for a pair of Lore-S which will be finished in a BMW Bronze Sepang Metallic.

In large measure I have all of you to thank for educating me, through all of your various posts and threads, about Tekton's speakers and high efficiency speakers in general.

A few weeks ago, I was on another forum reading about Dennis Had's Inspire SET amplifiers and I bought a KT88 based Inspire IFA-1 SET amplifier with a Blue Alps attenuator. I initially hooked it up to my Bryston Mini T's and while it sounded real good, I could not help but wonder what a pair of high efficiency speakers would sound like with it.

A week or so ago I was perusing my local Craigslist and saw that a local guy was selling a pair of Klipsch Heresy 1's HWO (Walnut Oil) circa 1984. I bought them and replaced the crossovers and tweeters with Crites replacments. Even though they sounded real good there was still more refinement, bass and finesse to be had somewhere.

That's where the Lore S's come in (hopefully). I cannot wait!

So any and all suggestions and thoughts are welcome regarding placement, SET amplification, and even capacitor upgrades.

Thanks again to all of you!

Tim

BTW, the Dennis Had amplifier sounds amazing and runs about 12 wpc.
 
Just today I spoke with Eric for a third time and placed an order for a pair of Lore-S which will be finished in a BMW Bronze Sepang Metallic.

In large measure I have all of you to thank for educating me, through all of your various posts and threads, about Tekton's speakers and high efficiency speakers in general.

A few weeks ago, I was on another forum reading about Dennis Had's Inspire SET amplifiers and I bought a KT88 based Inspire IFA-1 SET amplifier with a Blue Alps attenuator. I initially hooked it up to my Bryston Mini T's and while it sounded real good, I could not help but wonder what a pair of high efficiency speakers would sound like with it.

A week or so ago I was perusing my local Craigslist and saw that a local guy was selling a pair of Klipsch Heresy 1's HWO (Walnut Oil) circa 1984. I bought them and replaced the crossovers and tweeters with Crites replacments. Even though they sounded real good there was still more refinement, bass and finesse to be had somewhere.

That's where the Lore S's come in (hopefully). I cannot wait!

So any and all suggestions and thoughts are welcome regarding placement, SET amplification, and even capacitor upgrades.

Thanks again to all of you!

Tim

BTW, the Dennis Had amplifier sounds amazing and runs about 12 wpc.

Excellent amp choice for the Lores :thmbsp:
 
I'm hoping you guys can help me. I put together my system solely on internet reviews. I had never heard anyone elses system until yesterday.
My set up is as follows
macbook > cambridge dac > decware csp2 pre > Aric audio KT88 tube amp > Lores.

After hearing the gentlemans stereo yesterday I can't help but notice that I feel my Lores are a bit too shrill (if that's the word) or high pitched for me. I brought my pre and amp to his house and tried it on both of his speakers to see what the differences in our 2 setups I might here.

His speakers were the Gallo 3.1s and as a back up pair he had the zu omens. I found the gallos to be more enjoyable. The Zu's had the same high tone I find to be less enjoyable.
I'm wondering if I can suit these Lores more to my liking? On the amp end Im wondering if a tube change will help? The pre has 6922 for input tubes and I just ordered 6N1P's to try in there place. The KT88 has JJ 12AU7's. Is there a different tube I should try in there place? I know that I can use a 12AX7 in it's place, but I don't think that will help me.
I'll give Eric a call or email this week. I just wanted to reach out to you folks 1st.
Thanks
 
Back
Top Bottom