Poultrygeist
Lunatic Member
With the preamp still powered my Audiobah green board emits the very faintest of faint sounds on turn off. It's not loud enough to be called a pop.
I got mine yesterday and have been listening to it a lot today. It sounds great, one interesting fact: the large "hockey puck" heat sink does get warm, even when no signal is being passed through it.
I got mine yesterday and have been listening to it a lot today. It sounds great, one interesting fact: the large "hockey puck" heat sink does get warm, even when no signal is being passed through it.
Good to know! What day did you order? I ordered last Saturday.
What about pop or clicks during power On/Off?
Hmm... warm but not hot I suppose? What about inductors, are they getting hot or just warm too?
Interesting though that 3110 board and chip doesn't even need heatsink and is cool on touch, just like inductors no matter how long is on and playing!
Yes, the heatsink gets warm, but not hot. The inductors are slightly warm too, but noticeably cooler than the heatsink. I've had several other TPA3116 boards, and none of them got warm at all,I wonder what is different about the Sure design.
Maybe you can check chippin 13/14/15 thats input side most right pins except the 16th
AM2=0, AM1=0, AM0=0 376 400 424
AM2=0, AM1=0, AM0=1 470 500 530
AM2=0, AM1=1, AM0=0 564 600 636
AM2=0, AM1=1, AM0=1 940 1000 1060
fOSC Oscillator frequency kHz
AM2=1, AM1=0, AM0=0 1128 1200 1278

Don't even bother David, just enjoy in music :thmbsp:
Design of the board looks nice and well made. If it get's a little warmer it's just normal for this configuration, and it suits better to 4 ohm spk.
Sure TPA3116 by davidflas, on Flickr
2 channel setup by davidflas, on FlickrSo David..is the sure board the clear winner for now? Is it a step above the blue/black?
DSC_8064 by davidflas, on Flickr