• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Simpleton - Thanks for the photos and measurements. It looks like that, since the grill is 11 1/4" wide and the woofer cutout is 11 3/4", that the sides of the cutout did not extend to the outside edges. Could you confirm what width of frame was left on the 2 sides? Also, I'm guessing that the photo showing the 11 3/4" is the full diameter of the cutout and not the measurement from the very bottom of the grill frame.
Thanks again for the details.
Bruce
 
Patience. I believe the tweeters in these weren't spectacular - and they were failure prone. They were a transition away from traditional paper cone tweeters, and there were problems to overcome. If you are patient, a Woffer will eventually come along. Look on Ebay UK. As for the mid - it may be a replacement Wharfedale part or? But don't part them out.
 
anyone get these knobs to work on a w60d mark II?

i thought it would be a no brainer but they are too tight as they sit and when i reamed them out a bit with the know and when with a round file they don’t seem to go fully on and want to swivel when they are on (too is wobbly).

seems like there is some kind of trick or i need to get some kind of specially shaped tool to real out the very bottom ID of the knob?

a lot more confusing than i could have imagined? thoughts? i bought the plastic ones which is what i think i saw was recommended in the thread...
 

Attachments

  • 5D307ECD-6F90-4E66-A86D-A239959D9486.jpeg
    5D307ECD-6F90-4E66-A86D-A239959D9486.jpeg
    58.3 KB · Views: 14
  • 74F9E371-A25B-44F7-BF36-BBB00CF0459B.jpeg
    74F9E371-A25B-44F7-BF36-BBB00CF0459B.jpeg
    39.7 KB · Views: 16
I don't know who recommended those - but they won't work. Those are late model Marshall amp type knobs for split shafts. Metric pitch - too small diameter.
 
anyone get these knobs to work on a w60d mark II?

i thought it would be a no brainer but they are too tight as they sit and when i reamed them out a bit with the know and when with a round file they don’t seem to go fully on and want to swivel when they are on (too is wobbly).

seems like there is some kind of trick or i need to get some kind of specially shaped tool to real out the very bottom ID of the knob?

a lot more confusing than i could have imagined? thoughts? i bought the plastic ones which is what i think i saw was recommended in the thread...
I think these wee knurled shafts and were never designed to work with knobs.
 
THANKS gents. so neither of these knobs would work on the w60d. guy seemed mighty please with himself and said to buy the plastic ones afaik. i guess it is not possible i am mixing these up with another speaker in the wharfedale line...
 

Attachments

  • 8087B1A2-DD42-4A54-B843-0F1DF7C6BC41.png
    8087B1A2-DD42-4A54-B843-0F1DF7C6BC41.png
    126.8 KB · Views: 8
  • EC8165DA-98C5-4B50-86CA-0A97F569532E.png
    EC8165DA-98C5-4B50-86CA-0A97F569532E.png
    120.6 KB · Views: 7
The set-screw version of these knobs - the ID is larger for a solid shaft. But how would you have access to the side of the knob to tighten the screws? On mine, I used a Sharpie and put a black dot of ink where the pointer would sit if there was a knob on the shaft. Turn the control to zero / minimum. put the dot at the 7:00 position and let the ink dry. Now you can easily see what the setting is - no knob necessary.
 
Simpleton - Thanks for the photos and measurements. It looks like that, since the grill is 11 1/4" wide and the woofer cutout is 11 3/4", that the sides of the cutout did not extend to the outside edges. Could you confirm what width of frame was left on the 2 sides? Also, I'm guessing that the photo showing the 11 3/4" is the full diameter of the cutout and not the measurement from the very bottom of the grill frame.
Thanks again for the details.
Bruce

mrbruce,

The grill is 11" wide (a hair more, but that is the cloth) and 19 1/2" tall.

The woofer cutout is 10 7/8" tall and 9 3/4" wide and is 7/8" from the bottom of the grill, centered.

The mid cutout is is 4 1/2" and is 1" from the top and 3/4" from the edge.

The tweeter cutout is 3 3/4" and is 1 1/4" from the top and 3/4" from the edge.

Let me know if this makes more sense.

Simpleton
 
00E53D9F-1B67-4F7D-B02C-568D2854D6DD.jpeg Got some parts in today. The 12’s and the 30’s are fore the wharfedale, the coneheads are for a set of thrift store altec’s I found.
 
First one done.

While in there i took pics of the insides.

first one.B48E109B-F4DA-455D-AC1B-52207DAC140B.jpeg
 

Attachments

  • 6C995A5B-D642-4734-977E-33CED5D86866.jpeg
    6C995A5B-D642-4734-977E-33CED5D86866.jpeg
    61.7 KB · Views: 20
  • 7C9AFA55-9EF0-4A43-BB6F-60F8A5543ED8.jpeg
    7C9AFA55-9EF0-4A43-BB6F-60F8A5543ED8.jpeg
    73 KB · Views: 19
  • 60BCBCB3-1A4F-48EB-8816-BADF855253E5.jpeg
    60BCBCB3-1A4F-48EB-8816-BADF855253E5.jpeg
    64.1 KB · Views: 21
  • 1F3A4AE7-819F-4398-A555-D986C1F85AB1.jpeg
    1F3A4AE7-819F-4398-A555-D986C1F85AB1.jpeg
    61.2 KB · Views: 19
  • 257AA862-C2CD-4548-80E6-9D977F9A63FB.jpeg
    257AA862-C2CD-4548-80E6-9D977F9A63FB.jpeg
    70.2 KB · Views: 19
Second one. Trying to figure out the woofers.
 

Attachments

  • 12669734-6757-4772-B2AD-0681EB4C2EC4.jpeg
    12669734-6757-4772-B2AD-0681EB4C2EC4.jpeg
    61.2 KB · Views: 10
  • 90453941-1455-4D99-B563-FEC23F3B8B31.jpeg
    90453941-1455-4D99-B563-FEC23F3B8B31.jpeg
    70.2 KB · Views: 10
  • 927E969A-823D-44F1-BE75-6FC6AAF9E5D6.jpeg
    927E969A-823D-44F1-BE75-6FC6AAF9E5D6.jpeg
    70.6 KB · Views: 10
  • FE3DA6B5-1543-4A4B-BB77-6A7AAB2F0FC8.jpeg
    FE3DA6B5-1543-4A4B-BB77-6A7AAB2F0FC8.jpeg
    101.4 KB · Views: 10
  • 3F100B09-69AD-479A-B565-BFF824E30B52.jpeg
    3F100B09-69AD-479A-B565-BFF824E30B52.jpeg
    86.9 KB · Views: 10
  • 4D4E3F9B-84CA-435A-BF39-C77E4881C270.jpeg
    4D4E3F9B-84CA-435A-BF39-C77E4881C270.jpeg
    132.2 KB · Views: 10
  • 1D759E5D-F056-4E24-85A0-90B38724091E.jpeg
    1D759E5D-F056-4E24-85A0-90B38724091E.jpeg
    111 KB · Views: 12
OK, they are back together.

Of course as soon as I hook them up to my Pioneer sx-1080, the tuner quits working...

OK, I shuffled things around and plugged in my Fluance RT81. I get a 60Hz hum...

WTF, does the universe not want my to hear these?

More shuffleing. Now I have them connected to my modern Denon and my JVC table.


The room is a mess, and nothing has been tweaked yet, but damn.

I need to do a much more, tweaking but at first listen these guys sound amazing.

A quick comparison shows no difference in sound between the two, but I'm sure I will pick out the differences as I get these dialed in.

I will report more after I have listens more.
 
I haven’t participated in this thread as of yet... but since it was on page 69, and since I dusted off some W60Ds that have been in storage since 2015 when I recapped them.., I thought I would jump in and say:

I sure do like my Wharfedale W60D pair!
 
I have my W70e’s running right now, fresh recap and a noticeable improvement. Using Alcaps from falcon acoustics and I am not disappointed. Powering them with a Pioneer QX8000. Super warm sound. I need to get the other set out and start working on them.
 
I replaced the original capacitors in my W90Ds the other day and then measured the old cap values:
12 mFd - 22.4, 24.2, 22.2 and 23.7 32mFd - 35.6 and 35.8
I guess it was beyond time for a change. Now sounding much better.
Now working on new grill covers (thanks to Simpleton's assistance) and then will sort out repair/replace for the 2 bad tweeters.

For reference, my original post about this set is post #1344 and includes pics of the crossovers.
 
Back
Top Bottom