• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Hey Mr bruce what caps did you use? I recapped my Heresy series 1 with bob Crites upgrades and have noticed a moderate improvement. Decide to use Alcap electrolytic caps from Falcon Acoustics in my first set of Wharfedale W70e’s after reading a lot of good reviews on them. They did not disappoint, even my wife wondered what I did to them.
 
I used Dayton 5% for everything. Letting them break in for several days initially and then I need to tackle the 2 bad tweeters issue. Also having an issue with the pots not allowing output except near the top of the range. They do sound good however, but I did not pay attention to how they sounded when I got them Knew they would need new caps and the woofers rotated so I didn't even audition them in "as found" condition.
 
I may try the Dayton’s in my next project. I did play all my wharfdale’s for a few weeks to get a feel for them before I recapped the first set. The original caps were only about %15 out of range but I’m sure they were bad as far as ESR goes. I did rotate the woofers after working on them, overall I’m pretty happy with them. I do need to build new grills with fabric for one pair.
 
I may try the Dayton’s in my next project. I did play all my wharfdale’s for a few weeks to get a feel for them before I recapped the first set. The original caps were only about %15 out of range but I’m sure they were bad as far as ESR goes. I did rotate the woofers after working on them, overall I’m pretty happy with them. I do need to build new grills with fabric for one pair.
Just Curious, how many pair of Wharfedales you have and which models? I also used the Dayton 5% and have been pleased with the result. Recap and new tweeters made a bit difference. I used DT94's, but I modified the mounting with resin casting to make the flange bolt compatible with the originals. I also kept two good purple tweeters in case I want to put them back to fully original some day.
 
I have 3 pair of W70e’s, I came across all of them in about a month in 3 separate places. You find one and they start falling out of the sky. 2 pair are in really good shape and original, radio people built. the 3rd (Rank built) was a free set that sat at the flea market for a long time, in the south that’s bad for wood. I got them with a stash of albums. They are my experimental set, I put some DC28-F tweeters I had and like the sound, I’m waiting on new caps for them. Also need to replace the grill boards and fabric, the cabinets are coming along, the tops were really bad and the backs were flaking. I’m making new rear panels out of some 3/4 MFD. I enjoy the sound of them, the 15” woofer really works well in my stereo room. I may be getting a set of W90d’s in a trade for a pair of 70’s and a turntable I have, they have bad pots on one speaker, cutting in and out, I have a spare set of W70d crossovers with good pots I will put into them with new caps, cabinets are nice and they have new fabric. Changing the tweeters really bring the sound out, I have the purple tweeters from my experimental 70’s and now see they don’t sound very good.
 
I replaced the original capacitors in my W90Ds the other day and then measured the old cap values:
12 mFd - 22.4, 24.2, 22.2 and 23.7 32mFd - 35.6 and 35.8
I guess it was beyond time for a change. Now sounding much better.
Now working on new grill covers (thanks to Simpleton's assistance) and then will sort out repair/replace for the 2 bad tweeters.

For reference, my original post about this set is post #1344 and includes pics of the crossovers.
What puts a smile on my face is thanks to the big improvements in capacitor construction even the cheapest capacitor, as long as it is the correct type, will be vast improvement over the original, which of course are also old and out of spec's. With vintage speakers there is no point in spending big bucks on capacitors. It was a real revelation when I went with the cheap Mundorf E-Cap NPE's on my Wharfedales.
 
I’m learning a lot on capacitors with all the speakers I have, nothing newer than 1991 here. I need to try the Mundorf, I don’t think they had the 25 MFD that I needed. I tried some Dayton poly caps in my speakerlab 7’s and did not like them.
 
I may try the Dayton’s in my next project. I did play all my wharfdale’s for a few weeks to get a feel for them before I recapped the first set. The original caps were only about %15 out of range but I’m sure they were bad as far as ESR goes. I did rotate the woofers after working on them, overall I’m pretty happy with them. I do need to build new grills with fabric for one pair.

After I got my W90D's put into a better place and applied a more power to them, I started hearing a noise from Lefty. Long story short, I found the woofers were dragging causing a crunchy sound.

At that point I gave up and moved to another project.

I had no idea rotating woofers was a thing. When I get home I'm going to flip Lefty upside down. If that fixes the drag on this, I will be thrilled.
 
After I got my W90D's put into a better place and applied a more power to them, I started hearing a noise from Lefty. Long story short, I found the woofers were dragging causing a crunchy sound.

At that point I gave up and moved to another project.

I had no idea rotating woofers was a thing. When I get home I'm going to flip Lefty upside down. If that fixes the drag on this, I will be thrilled.
Because Wharfedale kept wire lengths to a minimum, you will likely need to extend the wiring from the terminal block to the woofers when they are rotated. I chose to splice a section between the ends rather than run totally new wire. Based on the way mine sound now, it didn't have any negative effect. :)
Bruce
 
I had no idea rotating woofers was a thing. When I get home I'm going to flip Lefty upside down. If that fixes the drag on this, I will be thrilled.

I have rotated woofers on most of my vintage speakers. This has fixed many voice coil rubs on the older speakers that have sat unused for years. I’m sure you will notice a difference right away.
 
I tried the speaker upside down and it did help, but I still have a buzz or other weird noise. I used a crappy iphone tone generator app with a 1/8 to RCA adapter going to an amp.

The app used to be ok, but they updated it to interrupt testing with adds in a very annoying way. I got fed up with it and quit.

I'm going to dig through my storage unit and see if I can find my function generator and oscilloscope. With that I should be able to test each woofer and tweeter individually as well as the crossover.
 
I recently picked up a pair of wharfedale 512.2 speakers. I can't find much about them. and I need a replacement 8.5" woofer. does anyone have one or know where i can get one? you can respond here or email me at jselt@nycap.rr.com
 
Anyone know what this number means by the date on this early W70 Woofer. I'm just beginning to rebuild these.

Woffer date.jpg
 
Second one. Trying to figure out the woofers.

The 2nd set of photos - one woofer you show here has been re-conned at some point. Square magnet, cone stamped WHF 5682 That is a Waldom part number on that cone. ( they are now out of business, unfortunately ) I worked in a speaker shop 30 plus years ago. Here is a pic of a different Waldom cone for comparison.
 

Attachments

  • Cone.jpg
    Cone.jpg
    72.5 KB · Views: 14
Found photo's of a model of the W60, and W70 I have never seen. The W60PR, and W70PR the Provincial. I am unsure which version of these 2 speakers certainly no newer than the "D" model. Love the claw feet.
E13367CC-0711-4497-AC9A-8E937853721A.jpeg CD646E87-7AAD-4035-BBF7-C18E57D7641D.jpeg
 
https://www.crutchfield.com/p_336D112WN/Wharfedale-Diamond-11-2-Walnut.html

I'm currently comparing two sets of speakers... one pair being the Diamond 11.2s.

Here is what I'm comparing them to: https://rslspeakers.com/products/cg3-bookshelf-speaker/

The RSL CG3 speakers are about the size of one of those 1/2 gallon milk wax cartons.

It's amazing that so much sound can be coming out of the CG3s.

I'm A/B-ing these two sets using a Niles speaker switch. I keep going back and forth between them... with no clear winner. Both are quite "listen-able."

I figure most of you have never listened to the RSL CG3 speakers... but some of you have likely heard the Diamond 11.2s.

Feel free to share your thoughts... thanks.
 
https://www.crutchfield.com/p_336D112WN/Wharfedale-Diamond-11-2-Walnut.html

I'm currently comparing two sets of speakers... one pair being the Diamond 11.2s.

Here is what I'm comparing them to: https://rslspeakers.com/products/cg3-bookshelf-speaker/

The RSL CG3 speakers are about the size of one of those 1/2 gallon milk wax cartons.

It's amazing that so much sound can be coming out of the CG3s.

I'm A/B-ing these two sets using a Niles speaker switch. I keep going back and forth between them... with no clear winner. Both are quite "listen-able."

I figure most of you have never listened to the RSL CG3 speakers... but some of you have likely heard the Diamond 11.2s.

Feel free to share your thoughts... thanks.
The Wharfedales should sound much better on the low end as they have a 6.5 inch woofer and are spec'd from 48 - 20K +/-3 where the RSL's are 4.5 inch and spec'd at 100 - 20K +/- 3. What type of music are you using to compare the two? Do you have a sub? If so, you probably won't hear much difference.
 
The Wharfedales should sound much better on the low end as they have a 6.5 inch woofer and are spec'd from 48 - 20K +/-3 where the RSL's are 4.5 inch and spec'd at 100 - 20K +/- 3. What type of music are you using to compare the two? Do you have a sub? If so, you probably won't hear much difference.

Thanks for the reply. I listen to some rock, a lot of synthesizer or electronic music, chill music, mood music.

You are correct in that the Wharfies have more bass than the CG3s. I have a subwoofer...actually two. One is the Speedwoofer made by RSL like the CG3s. The other sub is a BIC 12 inch. So the low end is met by the subs. RSL recommends setting the crossover at 90hz.

It's a bit odd that sometimes the CG3s have better separation (sound stage?) than the Wharfies. I could probably position the speakers a bit differently to take care of that. Sometimes the highs sound better with the CG3s than the Wharfies. The Wharfies also seem to have a "hole" in the middle that the CGs don't.

I know that sounds like I'm favoring the CG3s... but the Wharfedales have their own sound... which I like, too.

RSL says to break in the CG3s for about 80 hours so I've been running them mostly all day for 3 days or so.

The price difference is significant: the Wharfedales are $427/pair and the CG3s are $235. But I can swing either of them dollar-wise.

I've got plenty of time to compare them... both sellers have generous return times.
 
Thanks for the reply. I listen to some rock, a lot of synthesizer or electronic music, chill music, mood music.

You are correct in that the Wharfies have more bass than the CG3s. I have a subwoofer...actually two. One is the Speedwoofer made by RSL like the CG3s. The other sub is a BIC 12 inch. So the low end is met by the subs. RSL recommends setting the crossover at 90hz.

It's a bit odd that sometimes the CG3s have better separation (sound stage?) than the Wharfies. I could probably position the speakers a bit differently to take care of that. Sometimes the highs sound better with the CG3s than the Wharfies. The Wharfies also seem to have a "hole" in the middle that the CGs don't.

I know that sounds like I'm favoring the CG3s... but the Wharfedales have their own sound... which I like, too.

RSL says to break in the CG3s for about 80 hours so I've been running them mostly all day for 3 days or so.

The price difference is significant: the Wharfedales are $427/pair and the CG3s are $235. But I can swing either of them dollar-wise.

I've got plenty of time to compare them... both sellers have generous return times.
The link you posted had the CG3's at $135 - significant difference. The "hole" may be perception if you are comparing to the CG3s and they have a mid-peak. Do you have any other speakers/good headphone that can act as a reference?

As you can see from my avatar, I'm a fan of the old school Wharfedales. The closest speakers I have to the 11's is a pair of Paradigm monitor V1 speakers which have base extension to 48Hz and spec at 60-20K +/-2. Sound good at medium/low volume and work well in a small room. Not a big fan of any bass reflex, or transmission line design in general which puts me at odds with most new speakers as they require a sub.
 
Back
Top Bottom