• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

First recap (mine) of the W90D’s. The original caps were all reading much higher than spec. The new caps are huge (relatively speaking) so I printed some custom cap holders and installed longer screws. Not showroom ready but effective.

IMG_2043_heic-L.jpg
 
Can’t wait to hear how it turns out! I have a pair of W90Ds as well. It doesn’t seem like they’re nearly as common as other large Wharfedales.
First recap (mine) of the W90D’s. The original caps were all reading much higher than spec. The new caps are huge (relatively speaking) so I printed some custom cap holders and installed longer screws. Not showroom ready but effective.

IMG_2043_heic-L.jpg
 
I bought a pair of these Wharfedale Ritz Diamonds for my son and I have to say, they’re quite impressive for what they are. I’m not Speaker critic, but I was pleasantly surprised from what MY ears tell me. I wasn’t able to find a ton about these online before doing my sight-unseen purchase and quickly realized they’re notably larger than a pair of regular, original Diamonds.
 

Attachments

  • DB7A261D-130A-4181-8F94-5C7E90020B71.jpeg
    DB7A261D-130A-4181-8F94-5C7E90020B71.jpeg
    111.5 KB · Views: 13
  • 93975D83-56A5-45B8-98AD-68AE5E639735.jpeg
    93975D83-56A5-45B8-98AD-68AE5E639735.jpeg
    100.4 KB · Views: 12
  • 9EF0FA2C-049A-4ACA-9654-72982B7123F3.jpeg
    9EF0FA2C-049A-4ACA-9654-72982B7123F3.jpeg
    69.2 KB · Views: 12
NBKHawk, so far I am very pleased. But to be fair, I wrapped up the recap in the 9pm hour and immediately started playing tunes for the neighborhood...:cool: I did order the Philip Glass CDs as suggested but also have my usual sources to play. Normally I would be working from home in that room but this week I am not. So I look forward to more time with them.
 
Hi All,
I have a pair of Wharfedale Rosedales. The 15's do not have continuity (voice coil issue I believe) however the cone does not rub and is in really good condition. Is there a place I can send these to be repaired?
 
Hi All,
I have a pair of Wharfedale Rosedales. The 15's do not have continuity (voice coil issue I believe) however the cone does not rub and is in really good condition. Is there a place I can send these to be repaired?
Hard to believe the VC is open without rub. Did you check continuity from where the tinsel connects to the coil?
I found a 51mm VC on ebay to repair one of my spare 15s. Haven’t done it yet due to not enough spare time so I can’t say it will work.
 
The 15's do not have continuity (voice coil issue I believe)
One more thing, a problem that was common on the 15 inch driver was that the terminal strip would detach from the aluminum frame, so it may be a matter of broken/shorted wires going to the voice coil. You will have to take the back off these speakers to inspect this. If you find this is the problem, you will have to reattach the strip to the frame. Position the broken rivet so it's back in the hole and use two thin tie wraps in a crisscross fashion to hold it in place (Wharfdale used stiff wire in a similar way to reinforce the strip).
 
Thanks for the response infullview,
it was the tinsel as it was attached to the terminal strip the copper had worn away but there still was a piece of string keeping it attached. I resoldered and it is reading 7 ohms!
I appreciate your help!
 
Thanks for the response infullview,
it was the tinsel as it was attached to the terminal strip the copper had worn away but there still was a piece of string keeping it attached. I resoldered and it is reading 7 ohms!
I appreciate your help!
That's great! Was that both speakers or just one of them?
 
It was just one. I just took the other speaker apart and the 15" is good. the mid is causing the break in continuity. At some point someone put realistic mids in that are 8 ohm it is blown on one of the speakers, I want to buy some original mids to get this back to stock. Is 8 ohms the correct rating for the mids or is it 4? Also, is there an easy way to get the tweeter bubble back when it's been pushed in? One of my tweeters has a crinkle - not bad but it would be great to have it popped back out.
 
It was just one. I just took the other speaker apart and the 15" is good. the mid is causing the break in continuity. At some point someone put realistic mids in that are 8 ohm it is blown on one of the speakers, I want to buy some original mids to get this back to stock. Is 8 ohms the correct rating for the mids or is it 4? Also, is there an easy way to get the tweeter bubble back when it's been pushed in? One of my tweeters has a crinkle - not bad but it would be great to have it popped back out.
I think the mids are around 6 Ohms DC resistance so they are probably 8 Ohms AC. Keep an eye out on e-pay as these may show up. In the mean time, parts express can probably suggest a suitable replacement.

I'm not sure what you can do if you have a dent in one of the purple dome tweeters. They're pretty fragile. I know that people have managed to use a vacuum cleaner to pull dents in dust caps, but that might damage the tweeter. You could try using some tape (painters tape?) to pull the dent. These Mylar tweeters are now very brittle and crack very easily so be very careful. I have both of the original dome tweeters for mine, but I didn't want to worry about blowing them so I ordered DT94's from parts express and reworked them to fit the original mounting (see page 55 in this thread).
 
W70's. Just picked these up. They look untouched. Just got them home today and sitting in garage for now.
Ive been reading everything i can about them but since theres so many opinions about what to run them with i hope the extra sherwood 7100a i have will be ok with them.
Screenshot_20200612-145715_OfferUp.jpg Screenshot_20200612-145703_OfferUp.jpg 20200612_124814.jpg
 
W70's. Just picked these up. They look untouched. Just got them home today and sitting in garage for now.
Ive been reading everything i can about them but since theres so many opinions about what to run them with i hope the extra sherwood 7100a i have will be ok with them.
View attachment 1895827 View attachment 1895828 View attachment 1895829
Looks like you're in for some fun restoring these. Sherwood 7100a has more than enough power to drive you out of the room as these are about 92-93db efficient. I think you have to remove the front baffle if you plan to change the grill cloth. I know people have done it, but I'm not familiar with this version of the W70 as mine are much newer (W70Es).
 
Has anyone re-clothed an early model?

You might want to read this thread. It's one of the most complete restoration on a W70 I've ever seen.
Yours are in much better shape so I don't think you have to re-veneer, but it does show how to knock out the front baffle in order to change the grill cloth. Your W70's are very early, but the cabinet construction is very similar to the W70Ds in the link.

https://audiokarma.org/forums/index...le-w70d-total-restoration-need-advice.466416/
 
Thank you.
Well tested them this morn. 1 everything works. At first no tweeter but turning the pot back and forth and it popped on. #2, tweeter is shot ☹
20200613_091519.jpg 20200613_091604.jpg 20200613_094429.jpg

Does the 12/60 on the woofer mean Dec 1960?
 
^^^^ Thanks, thats a perfect link for the cloth.

Im gonna start a new post in the speaker side.
Any ideas about the tweeter would be great.

Mike
 
Last edited:
Thank you.
Well tested them this morn. 1 everything works. At first no tweeter but turning the pot back and forth and it popped on. #2, tweeter is shot ☹
View attachment 1896766 View attachment 1896767 View attachment 1896769

Does the 12/60 on the woofer mean Dec 1960?
Ouch! that looks like a super 3 tweeter. They command a price of between 70 - 120$ on e-pay. The good news is they are available. The next option would be to have the bad one repaired. There's someon on AK with mad skills in that department, but I can't remember his name...
 
Back
Top Bottom