• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

They look to be of the same generation as my W70C's, if it's the same mid driver they have bolt on magnets to the basket, and you can gently loosen the bolts with the driver facing down, play a low volume, low frequency, 40-70 Htz and gently re-align the magnet, then tighten down the bolts. I've had to do that with one of my mid's. That's just the mid-range, though, the bass driver has the magnet and basket all one unit.

DON'T unscrew the bolt entirely, though, it can fall in behind the spider
 
:D
Hello, fellow Wharfedale owners. I am a new owner of a lovely pair of W90c's that I found locally. They are fantastic sounding speakers and in pretty good shape (one cabinet has water damage to the sides). The one woofer in that cabinet (without the polystyrene) is rubbing on the coil or something along those lines, I can reproduce it if I manually move the cone. I flipped it 180 degrees and reinstalled but it's still rubbing. The strange thing to me is that when it's laying on its back, it does not rub at all.

I am not super well versed in this stuff (if you didn't figure that out from the first paragraph) and don't want to do surgery on this one without having a backup. I found a woofer for sale from another W90 that looks the same, with a round magnet on the back instead of square. My concern with the possible replacement is that it measures at 5ohms where mine measures 6ohms. Is that 1ohm difference going to be an issue?

I appreciate any advice you may have. Thanks!

View attachment 2533550

form & function - absolutely beautiful.
me envious.
 
CJ Payne - I am absolutely going to try that trick, I have nothing to lose should it not work. Replacement drivers should be here today so I'll start on that tonight hopefully. Thank you!

unkqty - I really got lucky finding these, I had been on the lookout for a pair of W70s and stumbled across these for sale less than 5 miles from my house. Thank you for the kind words.
 
CJ Payne - I am absolutely going to try that trick, I have nothing to lose should it not work. Replacement drivers should be here today so I'll start on that tonight hopefully. Thank you!

unkqty - I really got lucky finding these, I had been on the lookout for a pair of W70s and stumbled across these for sale less than 5 miles from my house. Thank you for the kind words.

found 2x sets of w70s at a neighor's estate sale several years back.
got the speakers and a few other items but (sadly) missed the neighbor.
 
Hi,long time listening first time caller here.
I recently built a pair of Wharfedale W30d Super lintons.
I Started with bare cabinets, using a Unit 3 speaker kit, then sourced original crossovers from EB.
I originaly recapped with Clarity Cap SA's...the sound was horrible, far too much Treble.
I then used Mundorf Ecap plain cap's of same value's, added a 6watt 22ohm power resister on the tweeter made by Welwyn in the uk, they were made for the military in the 70's (i grew up 5 minutes from the Welwyn factory).
Lined the cabinets with Felt backed carpet, upgraded the wiring to 14awg ofc wire (lamp chord).Stuffed the cabinets with polyphil.
Paired with a Sony TA 1066 (20watts rms) they are great speakers.
From what i can find online these have a maximum input of 30watts 8ohms.
My next task will be to give the same treatmant to a pair of Dovedale 3's and a pair of denton 2's i have.
I love the old Wharfedale's.
Here's a few pics.
 

Attachments

  • 20220321_104635.jpg
    20220321_104635.jpg
    112 KB · Views: 17
  • 20220131_161713.jpg
    20220131_161713.jpg
    106.4 KB · Views: 16
  • 20220131_161732.jpg
    20220131_161732.jpg
    116.8 KB · Views: 15
  • 20220320_091457.jpg
    20220320_091457.jpg
    178 KB · Views: 17
  • 20220410_154324.jpg
    20220410_154324.jpg
    180.1 KB · Views: 15
  • 20220320_091910.jpg
    20220320_091910.jpg
    96.4 KB · Views: 14
  • 20220321_104819.jpg
    20220321_104819.jpg
    184.8 KB · Views: 16
  • 20211103_164507.jpg
    20211103_164507.jpg
    143 KB · Views: 17
  • 20211103_165102.jpg
    20211103_165102.jpg
    186.1 KB · Views: 16
  • IMG_20220410_160903_270.jpg
    IMG_20220410_160903_270.jpg
    44 KB · Views: 14
Last edited:
Hi, long-time listening first-time caller here.
I recently built a pair of Wharfedale W30d Super lintons. Started with bare cabinets, using a Unit 3 speaker kit, then sourced original crossovers from EB.
I originally recapped with Clarity Cap SA's...the sound was horrible, far too much Treble.
I then used Mundorf ECaps of same value's, and added a 6watt 22ohm power resister on the tweeter made by Welwyn in the uk that were made for the military in the 70's (i grew up 5 mins from the Welwyn factory).
Lined the cabinets with Felt backed carpet, upgraded the wiring to 14awg ofc wire (lamp chord).Stuffed the cabinets with polyphil.
Paired with a Sony TA 1066 they are great speakers.
My next task will be to give the same treatmant to a pair of Dovedale 3's and a pair of denton 2's i have.
I love the old Wharfedale's.
Here's a few pics.

I have found in my Wharfedales the Mundorf ECap plains are a great choice, the price is right too. I have a couple of sets of crossovers for my W35’s and I installed Dayton Film Cap’s on one, and Mundorf ECap on the other. The Dayton flims were given several days to break in, about 100 hours. There is some argument about breaking in polyflim cap but you can hear the speakers smoothing out in time. Interestingly there does not seem to be a similar break-in period for a Bipolar electrolytic. In an AB comparison the Mundorf ECap’s preserved the Wharfedale style “English” sound.

With my cherished W45s I went overboard with them. I replaced the internal speaker wire the W45 does not have slide-on speaker connectors everything is soldered. I replaced what was there with better quality 24 gauge wire. I cut the wire about 6” longer to facilitate the removal of the drivers. My W45s have the 3 cap crossover, later models had 2. I installed the Mundorf ECap’s but this time I did the bypass cap thing. I installed a set of Sonicap bypass capacitors. After a suitable break-in period the only thing I can say is it didn't hurt the sound any, they are already great sounding speakers.
 
I have found in my Wharfedales the Mundorf ECap plains are a great choice, the price is right too. I have a couple of sets of crossovers for my W35’s and I installed Dayton Film Cap’s on one, and Mundorf ECap on the other. The Dayton flims were given several days to break in, about 100 hours. There is some argument about breaking in polyflim cap but you can hear the speakers smoothing out in time. Interestingly there does not seem to be a similar break-in period for a Bipolar electrolytic. In an AB comparison the Mundorf ECap’s preserved the Wharfedale style “English” sound.

With my cherished W45s I went overboard with them. I replaced the internal speaker wire the W45 does not have slide-on speaker connectors everything is soldered. I replaced what was there with better quality 24 gauge wire. I cut the wire about 6” longer to facilitate the removal of the drivers. My W45s have the 3 cap crossover, later models had 2. I installed the Mundorf ECap’s but this time I did the bypass cap thing. I installed a set of Sonicap bypass capacitors. After a suitable break-in period the only thing I can say is it didn't hurt the sound any, they are already great sounding speakers.

I used the same Ecap plains 70v's.
Price is great.
Very happy with the sound.
Ive got all the replacemant caps ready to do the Dovedale 3's and Denton 2's.
Again Mundorf Ecap plains.
Ive got a pair of original Meltons too.
Im little obsessed with the old wharfedales.
I missed out on a pair of rosedales last summer, £200 local...they were sold within days of being advertised.
At some point id like to get a set of wharfedale 10 rs dd full range drivers and use the melton cabinets.
 
I used the same Ecap plains 70v's.
Price is great.
Very happy with the sound.
Ive got all the replacemant caps ready to do the Dovedale 3's and Denton 2's.
Again Mundorf Ecap plains.
Ive got a pair of original Meltons too.
Im little obsessed with the old wharfedales.
I missed out on a pair of rosedales last summer, £200 local...they were sold within days of being advertised.
At some point id like to get a set of wharfedale 10 rs dd full range drivers and use the melton cabinets.
If you like the Rosedales, you should also keep your eyes open for a pair of Kingsdales, essentially the same set of speakers with a better crossover but cabinet is a little smaller.
 
Last edited:
Awesum, ill be picking that book up. Thanks for the heads up bud.
I gave you a UK link to get it. The real treasure is the whole back section lists Wharfedale Speakers and drivers. This section gave me the clue about the “American” Wharfedales. Not many of the “W’ series speakers are listed. The W70 and W90 have no equivalent in the UK.
 
I gave you a UK link to get it. The real treasure is the whole back section lists Wharfedale Speakers and drivers. This section gave me the clue about the “American” Wharfedales. Not many of the “W’ series speakers are listed. The W70 and W90 have no equivalent in the UK.
What about the Rosedale? That's roughly equivalent to a W70E just as the Dovedale is to the W60. I think the W90 stands alone as a non-UK model.
 
What about the Rosedale? That's roughly equivalent to a W70E just as the Dovedale is to the W60. I think the W90 stands alone as a non-UK model.
They are very similar but I think the cabinets might have been build stateside but everything else was imported from the UK. The problem is there is no documentation to pin down what was done in New York State.
 
They are very similar but I think the cabinets might have been build stateside but everything else was imported from the UK. The problem is there is no documentation to pin down what was done in New York State.
It would have been really nice if they had actually put a serial numbers on these so we could track when the various mid-model changes were made.
 
Last edited:
I just had kind of a scare with my W70e's. I thought I was losing the mid range driver on one side. I played around with the mid control on the back and it was cutting in and out. It would play fine and then start distorting. I finally broke down and hauled all 55 lbs of it to the bench. Found the 3.3 Ohm resistor was detached from the wiper terminal on the potentiometer ! It either broke off, or it was a cold solder joint. I cleaned it up and resoldered it. Also cleaned the pot with some CRC while I was there. Problem solved! Sounding great again.
 
I have extra crossovers for my my W25, 35, and 45’s. I have found astonishingly bad solderIng on the W25’s, on one of the W35’s one of the solder tabs was not even soldered. With this in mind I now re-solder everything. I use Cardas solder and Cardas paste flux to do this. My go-to solder is Kester but Cardas Solder and flux flows and bounds better than any solder I have ever used it is cheap long term insurance against bad solder connections.

http://www.cardas.com/solder.php
 
With this in mind I now re-solder everything
I probably should have, but I rebuilt these crossovers in place through the large woofer hole so I wasn't as thorough as I should have been. Oh well, live and learn. BTW Kester is my go to, and never had a problem with it not flowing well.
 
I probably should have, but I rebuilt these crossovers in place through the large woofer hole so I wasn't as thorough as I should have been. Oh well, live and learn. BTW Kester is my go to, and never had a problem with it not flowing well.
It is using the additional paste flux that does the trick. It is nice how solder flows using it.
 
Have been listening to the W70e’s a lot lately and i still love the way they sound. I’m not sure what the difference is, but these are a very late run version of this model and the crossover looks a lot more like a modern 2nd order Butterworth design. 12 db octave with the exception of woofer which rolls off a lot more gently. The woofer does most of the heavy lifting to about 5kHz which I think is amazing. In any case, people who walk into my living room and hear them are generally stunned by sound they produce.
 
Have been listening to the W70e’s a lot lately and I still love the way they sound. I’m not sure what the difference is, but these are a very late run version of this model and the crossover looks a lot more like a modern 2nd order Butterworth design. 12 db octave with the exception of woofer which rolls off a lot more gently. The woofer does most of the heavy lifting to about 5kHz which I think is amazing. In any case, people who walk into my living room and hear them are generally stunned by sound they produce.

The “E” line includes the W25-35-45 W60E, W70E, and the very rare W80A Veriflex. They were introduced very late in 1969. In my opinion are the last of the truly English Wharfedales. I have never been able to pin down exactly when they were replaced I purchased my W35s new in 1973. Wharfedale did not advertised much. And I have posted what little been able to find on this thread.
 
Back
Top Bottom