• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

2265b

  1. Childof60

    2265B P700 Printed Circuit Board Clone - Any Experience?

    I found a 2265B a couple of years ago in excellent cosmetic condition. Unfortunately it had been a victim of lightening that took out the power supply and P700 amplifier. While I was able to repair the power supply tlhe P700 board is beyond repair assume of the traces were blown off as well...
  2. Childof60

    Marantz 2265B Low Filter Sends Receiver (Briefly) Into Protection

    Doing a full restoration of a very nice 2265B. Finished the preamp/tone control board that fixed the failing 2SC798 noise and pop issue. Moving on the low filter switch seems to briefly drive the receiver into protection when released. I suspect the QH01/QH02 2SC1345 transistors are starting...
  3. Captain581

    Do brand mismatched output transistors affect anything?

    I just purchased a gorgeous 2265B that admittedly look good - almost like new. Sounds good too, although maybe not quite as ear-friendly as my 2252B, which I just sold. Might be the BIAS, which I'll have tended to. I paid top price for this 2265B (too afraid to admit how much). I was told it...
    • Captain581
    • Thread
    • 2265b mismatched drivers for bass output transistors
    • Replies: 8
    • Forum: Marantz Audio
  4. D

    Marantz 2265B worth?

    Hi, just wondering what my 2265b, great shape, no wooden case might be worth? Thanks.
  5. Mike Sweeney

    Pot Notes, not that kind.. The Marantz kind

    So I replaced a very hard to find balance control on my 2285B and decide to explore the old one. It didnt work well, the right side would cut out and all kinds of noise when turned even after DeOxit, cleaner and Shield. What I found was you could see the ohms resistance jump around when you...
  6. Mike Sweeney

    Source of 2285B parts :)

    So when I bought my 2285B, I didn't know it was such a rare beast. I got it done but I had a poor condition balance pot and a volume pot that had a bent shaft. Both are unique to the 2285B and the balance pot has a detent click in the middle. What I found after a significant amount of digging...
  7. Mike Sweeney

    Share and share alike ;) 2265B and 2285B

    So a while back I restored a 2285B but I knew it had a bent volume control shaft and a flaky balance pot. And it's like finding hen's teeth to get replacements. What i found sorta by accident is the that the tone board and parts on the 2265B and the 2285B are the exact same down to having the...
  8. Richs_Trains

    Quick relay question... hope a quick answer.

    Hey all, Got a new relay for my 2265B. The relay looks pretty much identical except the original has non used legs that are cut off flush to the relay. The new one has all the pins intact. Should I cut off the unused pins, or can I jut leave them not connected. Pins 1-4 have no solder pad...
  9. Richs_Trains

    2265B Rebuild Questions

    Hey All, Got a 2265B that was supposed to be DOA, but it had some mechanical problems with the selector switch and I now have AM/FM audio, the thing I have not encountered before, any other input produces garbled signal. You can make out the music, but it is completely garbled and distorted...
  10. Richs_Trains

    Marantz 2265B

    Hey all, got a Marantz 2265B coming in a week or so, no experience with this model, don't know if it works, was listed as 'for restoration' so going in blind. Any thoughts or issues with this model? Thanks Rich
Back
Top Bottom