• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

channel issues

  1. mcaddie7

    Nikko NR 1019 Channel Issues

    Howdy all, So I have a Nikko NR 1019 that has been giving my troubles. After some time, the right channel will drop out. Now I've troubleshot this to be up to the Amp board as the receiver has a Pre Out / Main In jumper on the back. Both L/R Pre Amp signals go through the Left Amp fine, but...
    • mcaddie7
    • Thread
    • channel cut out channel cutout channel failure channel issues nikko nikko 1019 nikko nr 1019 receiver solid state
    • Replies: 1
    • Forum: Solid State
  2. Lioramst

    Strange channel issue with The Fisher 175 T

    I recently bought a 175 T. I re-caped and serviced it, including cleaning the pots and checking the transistors. When I play on stereo mode I get only the right input channel playing through both speakers, but when I play on mono I get both input channels, left and right, on both speakers - as...
    • Lioramst
    • Thread
    • 175t channel issues the fisher the fisher 175 t
    • Replies: 0
    • Forum: Solid State
  3. I

    Kenwood KX-1030 Speed change issues and Channel Distortion

    I got a KX-1030 recently and I changed the belts and upon testing I realised that the speed adjusts itself sometimes? it switches from slow to fast every once in a while by itself no matter how much I adjust it, and ontop of that my left channel has some like tape noise/distortion only heard...
    • isaaclora13
    • Thread
    • cassette channel issues kenwood kenwood kx-1030 repair speed change problem tape
    • Replies: 4
    • Forum: Tape
  4. J

    Sansui 9090 no signal on left channel

    I have not used my Sansui 9090 for several months. I connected it today as stand alone and with a pre-amp but left channel doesn't have any signal or sound in Stereo mode. Speaker is good as the left channel works in "Mono" mode without the pre-amp. What could be the issue? Is this...
    • jervz
    • Thread
    • channel a no sound channel issues sansui 9090 sansui recap sansui receiver
    • Replies: 5
    • Forum: Exclusively Sansui
  5. R

    Peachtree Audio Nova 2009 Left Channel Buzz

    Hi all, I recently set up my Peachtree Audio Nova (the original model from 2009), and it seems as if the left channel is acting all out of whack. It’s incredibly quiet, and when the volume pot approaches midway, there’s an intense buzzing that peaks at the middle and then goes back down as the...
  6. D

    Right channel dropping out when adjusting selector switch on Marantz PM550dc

    Hey everyone, long time lurker but first time poster on this forum. I have some trouble with my Marantz PM550dc. The right channel keeps cutting out when the amplifier is running. When I adjust the selector switch, it can sometimes come back on for a certain period of time. Trying to put the...
    • DirtyRecords
    • Thread
    • audio amplifier repair channel cutout channel drop out channel issues
    • Replies: 3
    • Forum: Marantz Audio
  7. V

    Marantz 2285B right channel issues

    Hello AKers ! First of all, sorry for my bad English, I'm a French guy looking for some help with my Marantz 2285B ;) Here is the problem: In "Phono 1" mode, with my L100 Centurys hooked, I have no sound in the right channel... The weird thing is that it doesn't do it all the time... - If I...
    • Vincent68210
    • Thread
    • 2285 2285b 2285bd channel failure channel issues marantz no sound no sound left channel no sound right channel
    • Replies: 11
    • Forum: Marantz Audio
  8. Normal Steg

    Should I repair my Sansui Au-7900 myself? Fuzzy left channel

    Hey there Audiophiles and Tech Wizards. I am reaching out to this community for some advice. I am a novice at repairing electronics. I can disassemble a device, deox pots, and I think I can even spot bad caps. I have repaired some really basic things, (recapped a pair of JBL L-100s, changed...
  9. C

    Sansui 800 Phono left channel issue

    Hello everyone Bought the receiver three weeks ago and everything was working ok. I sprayed it with deoxit and faderlube following a useful idiots guide here in ak, and everything was good until tonight when the left channel had a noticeable hum and lower sound than the right channel when I was...
  10. BSharp

    Stereotech 1200 Channel Issues

    Hey AK, been lurking here for a while because it seems all you people are my kinda people. I’ve become the owner of a Stereotech 1200 in decently nice condition. All inputs and outputs work, sounds immaculate, and is a lot better than the Pioneer VSX that I previously used as a receiver. On...
    • BSharp
    • Thread
    • channel issues help stereotech
    • Replies: 3
    • Forum: Solid State
  11. coelacanthy

    Nikko STA 5010 Issues...

    Greetings stereo experts! I am having a few issues with my Nikko STA 5010. The right channel is the issue and can be sporadic at best. Normally toggling the input selector would reengage the right channel, along with reseting the fuse at times. I am now getting nothing and the fuse just clicks...
  12. audi0n00b

    Sony TA1120A; only one channel in Stereo mode

    Fired up my system today and only had sound from one channel, the left. Thought it was a speaker issue, but when I switched the output to right only the speaker came on. It plays in all modes it should including L+R and Reverse, just not in stereo. With my limited knowledge not sure where to...
  13. Briant8

    Sansui QRX-7500 channel weirdness.

    Hi All, A buddy asked me to look at his QRX-7500, and this is the channel weirdness going on. When I try 2-channel stereo (front speakers) the left side is strong but the right channel is out. But when I try the quad settings, the rear right side is good but the left side is out. All 4 power...
  14. A

    Kenwood 7100 Right Channel Issues

    Hi all - I just purchased my first piece of vintage audio equipment so please be patient with me as this is completely new! I just got a Kenwood 7100 integrated amplifier and noticed that the right channel will either get very quite or will get scratchy and cut out. I've found that increasing...
    • apn408
    • Thread
    • channel issues kenwood kenwood 7100 right channel
    • Replies: 5
    • Forum: Solid State
Back
Top Bottom