I'm currently having an issue on my 9090DB where the protection light does not come on and it does not click. From digging around forums, I believe that the F-2624 board is the problem. Attached are the resistor values that I obtained, photos of the board, and a fusible resistors that looks and...
Hello! I’ve just nearly finished building this board and it’s beautiful. Very grateful to Ben for providing the BOM along with the blank PCB on eBay. I unfortunately have made somewhat of a rookie mistake in attaching the bottom connectors as they are misaligned with my 7070 male pins and won’t...
I'm looking at an 8080db that has been through at least 3 other repair hands. The good news is most electrolytics have been replaced.
The last tech " got rid of the protection circuit " but thankfully the board is still in there :) I just need to figure out how he bypassed it.
I pulled...
First time poster, long time reader! I searched this board six ways to Sunday and didn't find a reference to the anomaly I observed during my repair. I'm wondering if I just missed it.
The unit came to me for repair from another guy who was unsuccessful fixing it. In the intervening time...
This multi-voltage, penultimate Dolby receiver came across my bench recently for a full restoration. Physically, the unit was complete with no missing knobs or switch covers. It even has the original plastic Dolby switch tag and red cardboard phono advice on the rear. It passed DBT and powered...
Greetings.
Here’s a thread detailing my first attempt at using this beautifully engineered F-2624 PCB produced by AK legends Tom and Toli. It does not cover any of the other F-2624 PBCs that have been seen on offer from various others.
Here's Tom’s original AK post...
If you have been around the Sansui Forum for any length of time you know that the 9090DB and it's variants, the 8080DB, 990DB and 890DB are the topics in many threads. They are arguably the most popular and most widely produced of all Sansui Receivers. The earliest serial number we have on...