Introduction
* As documented in report, ReVox B710 Tape Deck – Successful Wow & Flutter Restoration, section "What did this restoration accomplish? While it took almost 2 years to complete this restoration, partly due to my first experience with a tape deck, my breaking the solenoid plunger...
Wow and Flutter
I’ve had a Vernier force sensor for educational use for a couple of years, acceleration and gyroscope. I didn’t have time to play with it until a couple of weeks ago, it connects via Bluetooth and can collect up to 1000 samples per second, here, acquiring the data, 5 minutes of...
Hey guys! I recently acquired a “fully serviced/restored” EICO HF-81 which I have connected to Heresy II’s speakers and I’m getting a constant flutter noise from both speakers and I’m not sure how to go about this. I’ll take any advice at this point before I have to take it to someone to repair...
Hi Guys,
I'm struggling with my listening room acoustics. The room (3m x 4.5m) itself is not ideal in terms of the layout, and there are some elements that can't be changed due to its characteristics e.g. 3x doors (including one glazed kitchen door) and window.
I've managed to reduce some of...
Been having this problem for a few months off and on. Records and stylus are clean. Phono pre-amp switch is set to OFF. This does not occur when I play CD's or Blu-Rays, so I know it's not the speakers.
I've tried adjusting everything that I've researched. All connections are tight.
My...
I have a 1st gen Thorens TD-160 without the transit locking screws. The wow/flutter is bugging me. RPM says I am running at 33.64 with wow/flutter of .30. New Thorens belt for a few months. Really clean unit, but I am noticing a wobble when the motor runs ... posted video with and without belt...
Hi all,I recently had my Marantz 5220 fully revised by a specialist tapedeck tech. I will copy a list of the work done below. However, after the revision there is still audible flutter, particularly when recording, and particularly on things like acoustic guitars and mandolins. In fact it's...
Not really, just thought that would be an interesting title for my first post here. I have been having some minor issues with my Technics RS-615US cassette deck. I purchased it mid-last year and have been working on it on and off since then. First was the replacement of the lamps in the VU...