• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

ground

  1. G

    Sanyo 825d Turntable with buzz

    I have a Sanyo 825d turntable which is new to me, though I am not new to Sanyo 825d turntables. Anyway, I was missing a channel so I replaced the RCA cables. The original cables where molded with the left right and ground together. The replacement is an inexpensive RCA cable and just some...
    • groen
    • Thread
    • buzz cables ground hum sanyo 825d turntable
    • Replies: 0
    • Forum: Turntables
  2. bandwagoner

    Sony PS-T22 - Internal Ground? Cartridge?

    Hello All, I have a Sony PS-T22 Turntable that I've been using for about the past year. I seem to be getting a little bit of static noise out of the left channel; it sounds like the ground isn't attached properly, but there is no ground wire to attach! The noise is faint, but annoying. It...
    • bandwagoner
    • Thread
    • at95e counterweight ground sony ps-t22 stylus
    • Replies: 9
    • Forum: Turntables
  3. Longaevus

    Humming Carver PM-1.5

    In order to properly feed a pair of JBL's Ti-3000 I recently traded, I purchased the aforementioned Carver power amp only to find out two strange behaviors: A) buzzing speakers - the speakers have a permanent buzzing sound that increases when both/either left and right gain controls of the amp...
    • Longaevus
    • Thread
    • buzz carver ground hum noise transformer
    • Replies: 6
    • Forum: DIY
  4. S

    Tape deck started humming after I opened it up

    Hi, this is my first post here at Audiokarma and I am very excited to be a new member! Here's my issue: The right channel on my Teac A-4070 began working intermittently. Usually it would be very very quiet and sometimes after I moved the deck it would become fully functional. Today, I opened up...
  5. jmitchell59

    Hafler DH 500 common ground?

    Good evening! I have a Hafler DH 500 that I'm selling on anther site. An interested buyer has asked if his Polk speakers, which require a common ground, will work with this amp. Does anyone know the answer to this? Why would speakers need a common ground?
  6. Reiver

    Odd Grounding issue

    Hi Folks, perhaps someone else out could offer a suggestion as to what might be happening here. The issue is this: when I ground my deck & / or tonearm (the deck and arm have separate ground wires) to anything, be it the back of the amp, a radiator, a screw into the wall whatever. I get a...
    • Reiver
    • Thread
    • ground ground loop technics sl-1500
    • Replies: 17
    • Forum: Turntables
  7. greenflash

    Buzz sound on Akai TT just acquired (ground?)

    Hi team, I just got a quite mint Akai ap003 and went I unwrapped it (shipped to me) and started it, found that there was a buzz sound coming out of the speakers.. Tried the usual (simple) stuff about grounding and positioning on the table. I even changed the table AND the amp. Now trying it on...
  8. H

    Krell KAV 300i problem

    Hi, everyone, My beautiful Krell KAV300i has some issue that I hope somebody here can address the problem. Well, I can explain the problem as follows; 1- Amp is on all the input jacks are empty, when I get closer my hands or touch one of the input RCA jacks a very high, annoying hum starts...
  9. lotsofluna

    Sony STR-7055A Receiver - Eliminating ground issue/electric hum

    In a desire to record many analogue formats I have, and to generally just eliminate the annoyance of electric hum, I've been trying to fully eliminate hum/ground my Sony STR-7055A Receiver unit (Reference). NOTE: The 7055 has a 3-prong output plug with ground pin (see here.) My unit is NOT the...
    • lotsofluna
    • Thread
    • ground hum receiver receiver advice sony sony str-7055a
    • Replies: 9
    • Forum: Solid State
  10. Moonwatcher

    Where to attach Miracord 770H ground wire

    Hi, The ground wire on my Elac Miraocrd 770H (the one with the strobe) came off, and I can't figure out where on the chassis to reattach it. I get a terrible hum. Anybody know where it goes? Thanks!
Back
Top Bottom