hi all, I purchased a non working Luxman l-100 in pretty good condition, I’ve started to refurb it but hoping to get some help where to look next to solve the faulty right channel so far can confirm
- both amp modules are working well when used directly as a power smp
- bias and offset holds...
Anything to keep in mind before trying to scrape off old decomposing foam from these tweeters? A particularly good scraping tool, blue painter's tape over the dome, how to best clean the surface before applying the new surrounds?
I am going to be buying a bunch of audio stuff soon if all goes well and included is a pair of jbl l100 speakers. From the price this pair of speakers seems to command I get the impression that these are quite iconic. However I was surprised at how little I could find in terms of actual praise...
hello to everybody,
I have pair of jbl l100 century. when I renovat the speakers and fixing the crossover I removed the jbl plat to get to the crossover. the label Plat was wrinkled and I can't straight it. I want to print a new Plat and I need file in high resolution of the jbl l100 century...
Hello all AKers! :)
My first post here, I've been reading you for some time from France and I appreciate all the content. A real resource for all Hi-Fi enthusiasts, well done!
I come to the subject.
I will soon be receiving a pair of beautiful JBL L100 Century. Perhaps not the most faithful...
Hey Guys -
I'm planning on restoring my old JBL L100's that my father gave me long ago, but wife put me on a budget. I wish I had taken better care of them when younger as they are in rough shape and been through a lot. I'll definitely have to re-cone the woofers and refinish cabinets, but...
Greetings, Welcome to my class where YOU are my teachers.
I am in the beginning stages of redesigning the crossover network on an old pair of JBL L100 Century speakers and I'd like some feedback and input on the component choices. I generally just use the Parts Express catalog (yes, I'm a...
Any constructive input? I've checked out a few tried and generally accepted modifications around the web, Murphy, Janzen, etc. but wanted to simplify their quite elaborate crossovers.
(Also, I'm not sure if I should have started a new topic. Lemme now if I should delete this and do that.)
Hi,
The L-pads in my L88P speakers are stereo ones, input to pin 1 on top one, pins 2 joined together and pin 3 on bottom one to negative. Is this the standard L-Pad or an aftermarket one? Is there an advantage to using this method? More power handling since each one is 15 watts? I can tell you...
So I’ve got a set of JBL L100s, and the grille foam is long gone. The walnut trim pieces have also seen better days so I thought I’d fix these up using some leftover grille cloth from a previous project. As usual I am taking photos of the project in order to share my work, engage in some...
Hi,
I really love my Marantz 2265 - but I've been offered a set of the new JBL L100 Classic and I'm really tempted to get them.
But the JBL's are 4 Ohm's and the 2265 is rated at 8 Ohm's.
I've read for and against - the dealer is saying it won't be an issue, while others are saying "don't"...
Was given these speakers by a friend. They sat in his moms house in a corner for years.
He was telling me that these speakers are coveted and this black was only made for friends and family of JBL. Special editions.
Can anyone tell me information? Are they worth anything to collectors...
For such a regarded speaker youd think they would perform excellent in soundstage and imaging. Now, if others have been able to produce a stereoscopic audio image with these speakers id like to know how they did it because ive failed to get even the slightest imaging out of them no matter the...
Hey guys!
I stumbled upon a pair of JBL L300 speakers. They were posted as a "curb alert" on a local Facebook group. I offered the poster some money to purchase them and hold them for pickup, but they insisted the speakers were trash. I came to get the beasts, and they have definitely seen...
I have a set of monoblocks (takes EL34, 8417, or 6550 tubes) which I want to hook up to the Bowers & Wilkins 805D speakers. When my output tube failed in the past, my L100 speakers produced a very loud pop sound that I fear might damage the $1k diamond tweeters aboard the B&W speakers. Of...
I passed down my first stereo receiver to my son this year for the holidays... a Marantz 2250B that I bought as a kid in the 70's. I somehow managed to hold onto it and even keep it in near pristine condition. EchoWars recapped it for me about 4 years ago and it has served me well. My son is...
Hey all,
Long time lurker and reader but new member and first-time poster. Am curious about amplification requirements for JBL L100s. I recently acquired a pair but found that my Marantz PM 300 (48WPC) did not sound great with them. My friend's father gave me one of his Marantz 2220 receivers...
Hello again fellow audio lovers,
I have found some century speakers claimed to be from the 70's but do to JBL's awesome century series it makes it hard to find anything about these Century branded speakers in between the cracks of all the jbl info. I cant even find a pic that looks like these...
So I managed to find 2 pairs of rather minty JBL100 Centruries at a local estate sale and they stuck around for 50% off day :rockon: Got them home and everything is working. however, upon close inspection, there is some sort of oil on the surrounds of all 4 woofers. It's still wet/tacky and...
A while back I inquired here about doing either the "Murphy" crossover or the commercially sold "Jantzen" crossover "upgrade" for the L100. Several people in this forum including leesonic and especially Richard Swerdlow were kind enough to go out of their way to produce a diagram and a parts...
One of the speaker I have always wanted since high school was the infamous jbl L100.well I
got my wish a few days ago when I found a pair for $40 at our local resale shop. the chezzy waffle
grill was gone but the speakers were in good shape, I would never spend that much money on a JBL speaker...