Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
Hi all,
Have had this pre-amp with me for a few years and have never had any eletrical or mechanical issues until now!
I rotated this out of daily service about 4-5 months ago; was dormant until I reintroduced it into the main system, driving a Yamaha M-65 on Class A mode.
Chain:
Technics...
Hi folks
I'm getting frustrated with a Technics SU-300MC PrePreAmp which has persistent crackle and a big transient when the needle hits the record on the right-hand channel. Left channel is fine. It's crackling when in the bypass mode (ie not using MC), so not sure what the problem is, bar a...
Hello there!
I just pulled a 50mc from a cabinet in my parents house. It has a dead channel (tested with multimeter) but with these wouldn’t a new stylus also fix a dead channel because it’s all in the stylus anyway?
That leads me to a follow up, am I correct that if I get a ATN30/31E it won’t...
Hi all.
Picked up some gear from a local guy who's unloading some unused kit. He's very careful with his components and tends to only buy from other enthusiasts and audiophiles. When gear isn't working functioning, he usually sends it to a reputed shop in my area (Los Angeles).
This is just...
Assuming one has an appropriate tonearm and MC preamp capabilities is it true that a moving coil cartridge will generally sound superior to a moving magnet catridge at the same price point?
Hey all, first whats needed for proper opinions, my setup
B&O 4004 w/ 20EN MMC
C22 Commemorative
MC275 CE
JBL C50 S7R
I first started looking at SUT's and came across a SOTA Head amp.. so I guess that this unit uses a battery which would remove the possible interference that some powered head...
Hey all. Wondering if anyone can shed light on this.
Purchased a Denon DL103S on eBay last weekend; output is 0.3mV, so needed to be into my MC input of my Nakamichi CA7 preamp. Manual says it set to "24" for gain. Cartridge impedence is 100ohm. Pre is factory-set to 100ohm.
Except there's no...
Hi all,
In the past, I've used a selection of MM and MC cartridges. However, just recently, for cheap I acquired an ultra low output MC, a MC-20 by ortofon, and it needs a re-tip. The output is super low: 0.07mV. (This is the MK1 version, with the purple/blue body, circa 1980, much lower than...
I just bought a broken at33ev cartridge from which two of the connector pins broke off/fell out. See the picture I attached. I was wondering if there was a way to get this repaired and what the average price of something like that would be. And if it's possible to even repair this. The...
I have a Koetsu cartridge with an output of 0.4 Millivolts. My receiver is a Marantz 2275. My question is, do I need an additional phono preamp to accommodate the moving coil cartridge? I have been listening to my turntable with it connected directly to the Marantz receiver, with the only...
Here we will discuss our builds of Wyn Palmers excellent spec'd Phono pre amp.
This is the first thread of Wyns design mostly about v1.x its has lots of good info on why he started this project.
High gain op amp based preamp for low output MC cartridges.
And this is the second thread where he...
Hello and Happy Saturday,
I have a question for all the MM vs MC guru’s. I just upgraded my preamp and the 2nd phono input is MC. While I do have the ability to adjust the ohms on the McIntosh C2300, can I take it down low enough to use a MM cart on the MC input?
I can always switch to a MC...
Does anyone out there have experience with the Quintet Red? Is it better than the Denon dl-103? I have a 2mm blue and am also entertaining the idea of going up to the bronze. Using a Parasound Zphono preamp.
What's the best cart to match with the Sony pua-114 tonearm? I am using a Parasound Zphono preamp. I was thinking about trying a Denon dl-103 MC, or do you think there would be a better option in the budget range? I already have an Ortofon Blue and Nagaoka MP-110. Just looking for ideas.
Hi all,
I've got a vintage Rega Planar 2 on the way and I'm in the market for a budget MC cartridge for it, since I have two amps here with decent (I'm told) MC stages (Tandberg 3012, Nakamichi SR4A), and I've never tried an MC cart. I've done a lot of reading already and pretty much narrowed...
I need to select a new cart/stylus for my Pioneer PL-L1000. I'm pretty budget limited ($200). My Nikko preamp allows me to select between MM and MC. On the MC side I can only afford the Denon DL 103. Is there a MM that I should consider that would give me more than the Denon offers. I've...
I have a Dual CS-5000 with an Ortofon X5-MC cartridge that I had retipped by Soundsmith with a ruby cantilever fitted with a nude contact line diamond.
When I first dropped the needle on a brand new high end pressing of ZZ Top's Rio Grande Mud, I could have wept. The turntable rumble was...
*first time post*
so today i purchased a Luxman PD277 Turntable that has a Denon DL-103R Cartridge with it. I got it all for $375 which seemed like a fair price for both. upon coming home to hook it up to my Marantz 2230 and Dynaco-a25's i was getting a really bad buzz when i had the 2230 in...
Hi, all!
I am relatively new to the hi-fi community, and I am looking for suggestions before purchasing a new stylus for my Technics SL-QD22.
This turntable was my dad's when he was around my age, and had it fitted with a Shure m99e cartridge and stylus when he bought it. It has since been...
I recently purchased a few items, one being a Sony PSX7 turntable. The turntable has an Ortofon step up transformer and a Nakamichi MC500 MC cartridge. I am having a hard time finding any info on the cartridge. Does anyone out there have one or maybe had experience with one?