Hey folks. So I've been starting to work on my dad's good old SX-737 - his "first major purchase" of his life. I had been lugging it around for the past couple decades and getting great use out of it, but it started to have the issue of the intermittent relay cutting out which got persistently...
Hello Everyone,
I purchased my RX-495 back in 1997. It has been flawless until 2024 when it would suddenly "click" and turn off, either at low or high volume. It is sensitive to vibration. Something as little as putting my coffee cup on the desk can trigger it to turn off. Sometimes the...
Hello AudioKarma members out there and greetings from Winnipeg, Canada. This is the first time I post a message in the forum, and all help will be much appreciated. I do have a couple of problems with my recently acquired Akai AM-2800 I hope you can help me.
The VU meter bulb is not turning on...
Hello folks,
I have a Marantz 2270 that I bought from ebay. When I first got it and connected everything, plugged it in the the power socket, it sounded great and everything worked. Then after maybe 2 hours of listening I heard a click from the relay then there was no sound. The music came back...
Hello AK'ers!
I'm new here. I don't have a lot of knowledge but I've restored a couple of HK330's, one wasn't working, and recapped a Tandberg TR1040 without issue.
I picked up a 2245 that the previous owner said "...had a quieter channel, so an output transistor was replaced and now it...
Hi guys,
Long time lurker/reader, finally made an account!
I have a SA-7500 that I got from a friend at work for free as it has problems. The unit was re-capped and had all transistors and power drivers replaced. However, afterwards it would no longer click out of protection.
I have been...
After discovering a failed PA3004 chip on my SA-7700 rebuild, and paying $35 for a single replacement, I asked @merlynski to help me design a PCB substitute, so we can all keep rehabbing these old units without paying exorbitant prices for new "old stock" chips.
Our design goal was to replicate...
I have a Kenwood KA-801 integrated amplifier. Recently I decided to clean up volume potentiometer (with deoxit), because it was producing static noise while turning. Accidentally i broke one of the wires that was connected (with screw) to the chassis, but soldered it back. Now when I try to...
Hello All,
I acquired this sx-780, which had been abandoned in an office move in the 90's and put it in my garage as a retirement project, well that is here now. Yesterday I got it out, and powered up without speakers.
Lights on, LED's work( tape monitor, Stereo), Tuning meter works. I...
Hi guys,
I've had this amp for a number of years and never had an issue. Recently sometimes upon powering up the relay wouldn't click and hence no sound output. Turning it off and on again would fix it.
Then it became progressively worse. Once it was on and I had sound, the sound would stop...