• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sx-1010

  1. G

    SX-1010 web databas

    Hello sx.1010 friends. I am in the process of renovating my sx-1010. But it was difficult to follow all the advice about components. Many are outdated. So I have made a website that contains all the circuit boards and components. It also contains pdf files of all circuit boards, both...
  2. tutor_turtle

    SX-1010 epic driver board issues.

    After Recapping every board except the driver boards, everything checked out. WhenI got to the first driver board, I discovered it had warped due to excessive heat. When I started replacing parts, traces fractured left and right. I got to the point of having to pull the board completely out of...
    • tutor_turtle
    • Thread
    • awh-032 bias troubles driver board substitute resistive load for output transistors sx-1010 trouble shooting ouptut
    • Replies: 25
    • Forum: Pioneer Audio
  3. Ben Rothman

    Can I Buff These Scratches Out? Pioneer SX-1010

    I've got a Pioneer SX-1010 that's been restored, and both the outside and inside are in near-perfect condition. On the inside, the tuner cover has a couple of light scratches that I would like to remove. I've thought of buffing them out with some polish or filling them in with some automotive...
    • Ben Rothman
    • Thread
    • cosmetics pioneer sx-1010 pioneer sx-1010 receiver sx-1010 sx-1010 issue
    • Replies: 16
    • Forum: Pioneer Audio
  4. Ben Rothman

    Potentiometer Rebuilder?

    Hi, I need to have my volume potentiometer for my SX-1010 rebuilt. I have gone down the faderlube route already, but this pot really needs to be disassembled and rebuilt. I was wondering if there is a shop or someone I can send the potentiometer to have it rebuilt? Any help would be greatly...
  5. Ben Rothman

    Pioneer SX-1010 Weird Intermittent Protection Issue

    Hi, I have been chasing an issue on my Pioneer SX-1010 for about a year. I have posted about it a couple of times; now and then, it will randomly jump into protect mode for 2 seconds and jump out. I have observed this issue for a year and can confidently say there is no pattern. It might not...
    • Ben Rothman
    • Thread
    • intermittent intermittent problem pioneer pioneer sx-1010 pioneer sx-1010 receiver protection mode protection problem sx-1010 sx-1010 issue
    • Replies: 11
    • Forum: Solid State
  6. Jstarz

    SX-1010 loud pops and relay protection. Restoration

    Hi AK, This is my first post on here and I have to thank you all for all the valuable information on here. Such an amazing community. Without it, I would never think of taking on a project like this since this is not my field. I picked up a Pioneer SX-1010 a couple of months ago. I live in...
    • Jstarz
    • Thread
    • help pioneer sx-1010 popping noise restauration sx-1010
    • Replies: 41
    • Forum: Pioneer Audio
  7. Tyler Prock

    Recapped better than spec pioneer sx-1010 or…

    May have the opportunity to trade my up to spec pioneer sx-1010 for a dynaco pas3, st 70, and an fm-3 plus a little cash on my end I could really care less on the tuner. So that’s not a plus to me in anyway. But I have been very curious of tube separates lately. I’m running Cornwalls with the sx...
    • Tyler Prock
    • Thread
    • advice dynaco help pioneer solid state st 70 sx-1010 tube amp
    • Replies: 3
    • Forum: Pioneer Audio
  8. jahmadeus

    Accessing SX-1010 Tuner Board

    Hello all, I am finishing up a rebuild of my SX-1010 and only have the tuner board left to work on. I have noticed that it is tethered down by its wire wrap connections on nearly every side. I have had success with desoldering select wirewrap posts from the other boards to gain access. However...
  9. merlynski

    SX-1010 schematic question / error / issue

    I am helping on an SX-1010 problem with the High Filter lamp being illuminated slightly when the switch is off. While perusing the very complicated Dim / Bright and High Filter switches' connections I came across an anomaly in the schematic. The common side of the Low Filter, High Filter, AF...
  10. J

    Yamaha AVS-700 Natural Sound AV Selector - Lots o' inputs! phono? Pioneer SX-1010

    Howdy! Is anyone out there using the phono input on a Yamaha AVS-700 Natural Sound AV Selector? I ran out of inputs on a Pioneer SX-1010 and grew tired of the dirty selector buttons and signal loss. Lucked-out finding a Yamaha AVS-700. I run its fixed stereo outputs to the Tape 2 input on the...
    • JesseS
    • Thread
    • avs-700 natural sound phono pioneer preamp selector sx-1010 technics sl-m2 turntable yamaha
    • Replies: 3
    • Forum: Solid State
  11. Super Noob

    Project: Pioneer SX-1010

    Project Pioneer: SX-1010 In my neverending quest for 70s silver face bliss, the adventure continues. There was a post in BT for a somewhat local unloved Pioneer SX-1010 with more than a few operational & cosmetic issues. This was my first purchase off BT since my status was updated to...
    • Super Noob
    • Thread
    • pioneer sx 1010 pioneer sx 1010 recap pioneer sx-1010 sx-1010
    • Replies: 60
    • Forum: Pioneer Audio
  12. KeithD

    Pioneer SX-828 vs 1010

    I have an 828 (and 2500, 990) and really like the sound. Just wondering if I'd notice any difference in the sound of a 1010? Initially, I had wanted a 1010, but decided to pick up an 828 since they are half the price of a 1010. Have not been disapointed with the 828, but did I miss anything...
  13. 70smidfiguy

    Pioneer SX 1010 - Simple question about Output TR order

    Hello all, I was attempting to replace the output transistors in my 1010, took a pic before I removed them but alas the pic has disappeared :( Can someone advise me of the order of the output transistors? For simplicity, if I'm facing the back of the receiver from left to right? Many thanks...
  14. Pioneer SX-1010

    Pioneer SX-1010

    1974
    • darkhosis
    • Media item
    • pioneer sx-1010
    • Comments: 0
    • Category: Member's Component
  15. Pioneer SX-1010 L driver board

    Pioneer SX-1010 L driver board

    pre restoration
    • darkhosis
    • Media item
    • pioneer sx-1010
    • Comments: 0
    • Category: Member's Component
  16. Pioneer SX-1010 Power Supply board

    Pioneer SX-1010 Power Supply board

    pre-restoration
    • darkhosis
    • Media item
    • pioneer sx-1010
    • Comments: 0
    • Category: Member's Component
  17. Pioneer SX-1010

    Pioneer SX-1010

    1974 Pioneer SX-1010
    • darkhosis
    • Media item
    • pioneer sx-1010
    • Comments: 0
    • Category: Member's Component
  18. camgilbert

    Pioneer SX-1010 - One channel low (even with Pre Out)

    Hi all, I received a Pioneer SX-1010 with a number of issues. The core issue though is that one channel is very low but this is intermittent. 90% of the time, its low! I have Deoxed all switches and controls and even changed out the volume pot with no change. I have also tested as unit as...
  19. LWB

    Another take on SX-1010 AWR-054 power supply heat management

    Somebody in another thread identified the SX-1010 power supply as a cause of global warming. A fair comment! It seems that every SX-1010 has a broiler built into the power supply. When it comes to trouble-shooting &/or refurbishing the SX-1010, the power supply is at the top of the list...
    • LWB
    • Thread
    • awr-054 power supply board power supply overheating sx-1010
    • Replies: 13
    • Forum: Pioneer Audio
  20. N

    SX-1010 diagnostic help

    Hey fine people of the Adiokarma community, I’m rather new at this, but picked up a non-working SX-1010 and decided (based on all the stellar reviews of this unit) that I’d try to figure out if I could get it working to be my home daily driver (I’ve recently caught the vintage audio bug). I...
  21. P

    New here

    hi guys I'm new here I've liked this site it has helped me over the years with my collection. I would like to introduce me and my collection to everyone. I'm from Ontario Canada and have been collecting pioneer equipment for a few years now the collection started when my dad handed down his...
  22. P

    pioneer sx 1010

    hi guys im currently trying to find out if im going down the right path I own an sx 1010 after a cap went on the power board im having trouble finding all affected areas of the receiver. So from what I can figure is I have a direct short on the left high output transistors (bank in heat sink...
  23. C

    New member in OKC

    I've visited this site many times and thought it was time to join. I was into stereo equipment in the middle 1970s and find myself being drawn back into it today. My current challenge is a Pioneer SX-1010. Chuck S.
  24. GITAY'ND

    sx-1010 developed Crackling & Popping Sound overnight

    hey everyone :( i have this sx-1010 that i bought on ebay 2 years ago. had an sx-737 before it , sold it an upgraded to the sx-1010. i have 2 pair's of hpm-60 & i uselly hear with 1 pair (they are different positioned). also a tube tuner , The-Fisher kr-60. so that's my system & let me tell u...
  25. Pioneer SX-1010

    Pioneer SX-1010

    Face
    • gyusher
    • Media item
    • sx-1010
    • Comments: 0
    • Category: Member Galleries
Back
Top Bottom