• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Well, I've been messing around with the zeniths and have come to the conclusions that mine are just not happy getting full signal. I don't have an active crossover or else I'd see how they sound with the highs cut a bit
I don't agree that adding a tweeter while running them wide open would help any. I have been trying them out in conjunction with other speakers and there is no improvement in masking the piercing frequency. Either they are just old and tired or mine are different and not meant to be run without a crossover. I'm not sure what I'm going to do now, as I don't really want to spend any more money on this experiment at the moment. I'll probably shelf them and try again at a later time. I think with a tweeter and a woofer and an active crossover they could sound amazing, but as they sit, they just don't sound correct, and I've run out of ideas.
 
Well, I've been messing around with the zeniths and have come to the conclusions that mine are just not happy getting full signal. I don't have an active crossover or else I'd see how they sound with the highs cut a bit
I don't agree that adding a tweeter while running them wide open would help any. I have been trying them out in conjunction with other speakers and there is no improvement in masking the piercing frequency. Either they are just old and tired or mine are different and not meant to be run without a crossover. I'm not sure what I'm going to do now, as I don't really want to spend any more money on this experiment at the moment. I'll probably shelf them and try again at a later time. I think with a tweeter and a woofer and an active crossover they could sound amazing, but as they sit, they just don't sound correct, and I've run out of ideas.

If they aren't faulty you can easily sell them. Maybe buy a pair of Wild Burro Betsy's which are new.
 
Why not a passive crossover? It needn't cost a lot of money for a pair of tweeters and a few capacitors and inductors.
That's an interesting idea, , but an active would be easier to adjust frequencys and find where the speakers sound best, with passive it's a guessing game and trial and error till you get it right.
 
...with passive it's a guessing game and trial and error till you get it right.
It doesn't have to be such a shot-in-the-dark as you suggest. Measuring software is available free (ARTA) and even without measurements calculations will get you in the right ballpark. You could certainly tame the "shoutiness" by ear rather than measurements.
 
That's an interesting idea, have you heard them? How do they stack up compared to other speakers you've tried?

The Betsy's were one of my first serious OB efforts and wish I hadn't sold them. These drivers unlike most FR's were designed strictly for OB's and to run without a crossover. I bi-amped them with the Betsy running straight off the MW amp while I used a 70Hz low pass filter on the woofers and powered them from an old AV receiver. A pair of F-mods would be another way to low pass the woofers.The passive F-mods cost around $25 and unlike a conventional low pass crossover they go upstream of the amp. They change the frequency before the signal is amplified just like an active crossover

How did they stack up? At the time I built them I also had a pair of Zu Omens which I thought were great speakers. But it was no contest between the two. I wasted no time selling the Zu's. Hope folks don't get tired of this picture which I've shown lots of time.

PB230008.jpg
 
Last edited:
Before I added the woofers to the Betsy I also enjoyed them in the folding wing baffle ( see Wild Burro Audio Labs website ). If you don't mind light bass the folding wing OB's sound great and can be thrown together in a few hours. The drawback is their imposing size.

P6030019.jpg
 
Last edited:
This guy ( Randy in Ky. ) makes a smaller but well reviewed baffle for the Betsy. I believe he now sells them through Decware Audio which is world famous for their tube amps. You can buy the Betsy/ Alpha combo which he calls the Buck. That's basically what I did years before and it's an easy diy.

http://www.caintuckaudio.com
 
There are scores of AK seniors that can no longer hear the upper frequencies. To think all their systems cause listener fatigue is BS.

Look, I have no interest in dragging out an argument over this especially since we don't even have anything to argue about - I never said what other people should hear or what should cause them fatique, I just shared my experience and what can cause fatigue to me, and I believe I tried to make it extra clear I was speaking of myself and how it works FOR ME. I also made it clear I hadn't heard the Zenith drivers in question. Turns out it didn't help the person who was struggling with getting a nice sound out of their Zeniths, but if they heard things similar to me, it could've.

I don't tell other people their experience is invalid or silly, even if it happens to be different than mine, and for the sake of maintaining a healthy discussion, I believe that's a good choice to make.
 
That's an interesting idea, , but an active would be easier to adjust frequencys and find where the speakers sound best, with passive it's a guessing game and trial and error till you get it right.

I think listening to music and playing around with EQ (either software or hardware) can go along way in understanding how a driver behaves and where it's giving your ears trouble. Even using frequency sweeps you can usually get some idea of the problem frequencies. It's true using passive filters, if you want to really optimize them to be the best you can do, it would probably take some trial and error, but you should be able to get a pretty good result just using your ears. Especially since full-range drivers give you a lot of room to work with.
 
Halk, here's a link to the Decware site and the first speaker shown is the OB Betsy. I don't recall it's db rating but I think it's in the low 90's. I know that a 3 watt SET amp can drive it with headroom to spare. It's nice to see folks jump into OB's with both feet rather than never getting past the experimental phase. I think you're headed in the right direction so don't give up on OB's.

http://www.decware.com/newsite/speakers.html
 
Ah, just read the Miflex KPCU-1 go through a dark/muddy stage with lack of high before getting better again. I think that's what is bugging me. Just have to push through that....

In the meantime I've ordered a pair of Aurum Cantus G3Si ribbon tweeters to replace the Plat Audio RT4-DP I currently have. It should be a very nice improvement on what I have now. 1,400 to 40,000Hz and 99db sensitive. Way past the 17,040Hz I can hear. Means I won't miss my Aurum Cantus F620 tower speakers when they're sold ;)

A shame they're not dipole though.

https://www.parts-express.com/aurum-cantus-g3si-ribbon-tweeter--276-410

My plans to get a RSL Speedwoofer 10S to fill in deep bass has been dashed with RSL saying they no longer send overseas due to too many being damaged in transit. Damn :(

Ah well, I'll focus on tweaking speakers and amp seeing as an SVS PB1000 is over $1k here :(
 
Halk, here's a link to the Decware site and the first speaker shown is the OB Betsy. I don't recall it's db rating but I think it's in the low 90's. I know that a 3 watt SET amp can drive it with headroom to spare. It's nice to see folks jump into OB's with both feet rather than never getting past the experimental phase. I think you're headed in the right direction so don't give up on OB's.

http://www.decware.com/newsite/speakers.html
I'm not giving up, I'm already deep down the OB black hole. I just need to regroup and figure out what to do next.
The adventure with the Zenith's has taken a lot out of me and I need to rest my ears from doing any critical listening and get back into enjoying the music again for a while before I get back into it.
 
The OP said that removing frequencies proved fatiguing to him. The general consensus was that this is not possible and the opposite must be true.

A megaphone removes the lower and higher frequencies creating a band pass filter. But it is fatiguing to listen to someone on a megaphone for long periods. This is just a case that back's the OP's contention that removing frequencies can be more fatiguing, that's all.
 

BTW, the featured artist at the Gila Bend amphitheater on my garden railroad is OAXACA LOUGIE doing his "IN YO FACE!" tour. He is often backed by the "Flem Fatales."

 
The OP said that removing frequencies proved fatiguing to him. The general consensus was that this is not possible and the opposite must be true.

A megaphone removes the lower and higher frequencies creating a band pass filter. But it is fatiguing to listen to someone on a megaphone for long periods. This is just a case that back's the OP's contention that removing frequencies can be more fatiguing, that's all.
Gotcha.
 
Back
Top Bottom