• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

That would be cool to hear your results. The zeniths can have some harshness that should go away as they break in, it can take a long time so let them run as much as possible. When they smooth out they are very impressive. I run mine in open baffle with subwoofer support. If I get a SET amp I might look to run separate signal to plate amp maybe diy subs in an effort to get set amp direct to zenith speakers.

Zenith in the house, Decware has no problem driving them, They do have a bit of harshness, Been playing for approx 4 hours now. I can certainly hear why so many like these drivers I picked up the 49CZ873 round magnet version.

Now I have to wonder if there is an improvement with the earlier square magnets ? I am also kicking my own A$$ for spending so much on supposed better drivers, makes me sick I bought this pair for 90.00 delivered. Not sure these will unseat my Jordans but its fun trying, The Jordans have ZERO harshness

Oh Well onward / upward :bigok:
 
The Zenith LOVE acoustic & Folk music, Im listening to Jack Johnson Live en Concert. A lot more venue echo is evident, Also getting more of a holographic picture. Kings of Leon was getting a bit harsh in louder passages. Really hoping these settle down some more
 
Turntable is doing fine now with the increased sensitivity of the FR drivers (Zeniths) Cant get over these drivers. They sound too good to be a 50+ year old driver that likely sat 30+ years without playing a note.
 
If there's one area that the Zenith and Magnavox drivers excelled it was the sound generated to the rear of the whereas the Lii Audio drivers mostly generate sound out the front of the driver. I believe this is due to the massive magnets on the rear of the Lii Audio drivers.

I suspect most would consider more sound from the back of the speaker a plus for open baffle use.

For me though I'll take the added speed and clarity of the Lii Audio drivers. It helps stop sound travelling to other sections of the house too.

I've been in touch with another person via Facebook is running the 12" version of Diatone P610 clone and has great things to say about it for open baffle use. From what he's said a little less detailed than the FAST-10 though very smooth and refined. Certainly a driver worth trying.
 
Last edited:
The round ceramic magnet Zeniths are not the same as those with the Alnico motors. I would only consider the Zeniths that look like this. And even if you find a pair they may have issues due to age. I recently discovered that one of my 8" Zeniths which came in the same console as these twelves is distorting.

P1010005.jpeg
 
So Pgeist, Have you heard the round magnet versions ? What would you say is different / better with the alnico ? Its hard to believe the magnet structure could make the drivers heads & tails better, Perhaps some nuance.

MJW, if you prefer the lions share of music to the front why not go with Horns ? I have used ORIS horns in several setups while they wont image like OB they do image and will hold a STRONG pinpoint image with a nice wide stage & even some depth depending on placement
 
MJW, if you prefer the lions share of music to the front why not go with Horns ? I have used ORIS horns in several setups while they wont image like OB they do image and will hold a STRONG pinpoint image with a nice wide stage & even some depth depending on placement

I already have horns in my system downstairs, and you're right that they do something truly special when paired with a tube amp and the right source. Mine are crossover upgraded Oatlon W2-1000F, essentially Klipsch KG5.5 inspired speakers except using a wooden horn and better constructed cabinet.

I've also a pair of vintage Toshiba SS41 speakers being restored which will probably replace the Oatlon.

That said I don't expect either to displace these DIY Open Back speakers as they do something else quite different with the most lifelike sound I've ever heard. Bass is fast, detailed and natural, and mids and treble is nothing short of spectacular. I don't believe I've ever experienced anything in the same league as these, even when I had the Zenith 49CZ924 + Magnavox drivers installed.

Though yes, I'm chasing horn sound too though not in my main system. Rather the system in my second living room. Klipsch Cornwall speakers will always remain an out of reach dream speaker for me due to their rarity and extremely high ($8-10k) resale value here in Australia. The Toshiba SS41 are the next best thing and were acquired for 1/8th the cost.

That said when its time to retire and downsize I believe it will be the DIY Open Back speakers that I keep. At this point nothing comes close to what they can do. They're just so darn real and natural sounding you know?
 
I already have horns in my system downstairs, and you're right that they do something truly special when paired with a tube amp and the right source. Mine are crossover upgraded Oatlon W2-1000F, essentially Klipsch KG5.5 inspired speakers except using a wooden horn and better constructed cabinet.

I've also a pair of vintage Toshiba SS41 speakers being restored which will probably replace the Oatlon.

That said I don't expect either to displace these DIY Open Back speakers as they do something else quite different with the most lifelike sound I've ever heard. Bass is fast, detailed and natural, and mids and treble is nothing short of spectacular. I don't believe I've ever experienced anything in the same league as these, even when I had the Zenith 49CZ924 + Magnavox drivers installed.

Though yes, I'm chasing horn sound too though not in my main system. Rather the system in my second living room. Klipsch Cornwall speakers will always remain an out of reach dream speaker for me due to their rarity and extremely high ($8-10k) resale value here in Australia. The Toshiba SS41 are the next best thing and were acquired for 1/8th the cost.

That said when its time to retire and downsize I believe it will be the DIY Open Back speakers that I keep. At this point nothing comes close to what they can do. They're just so darn real and natural sounding you know?

I was massively into horns for years, I have had 3 pairs of K-Horns, 4 pair of lascala, 3 pair cornwall, 2 pair heresy even had belles twice, I built 4 or 5 different pair of Oris Horns, and had Edgar Titans with dual siesmic subs. and I have to agree the OB do something very special, I much prefer the OB bass as well. Cannot believe cornwalls go for that kind of $$$ there might be worth buying up several pairs and shipping to ya
 
I was massively into horns for years, I have had 3 pairs of K-Horns, 4 pair of lascala, 3 pair cornwall, 2 pair heresy even had belles twice, I built 4 or 5 different pair of Oris Horns, and had Edgar Titans with dual siesmic subs. and I have to agree the OB do something very special, I much prefer the OB bass as well. Cannot believe cornwalls go for that kind of $$$ there might be worth buying up several pairs and shipping to ya

Ah, I've looked into that. The exchange rate and shipping is a killer getting speakers from the states.

It's alright though, my mate tested out the SS41 after a recap and is currently singing their praises. A pair of speakers that fly under the radar due to their rarity. They appear to be a rebadge of the 1968 Onkyo E83A speakers. There's hardly any information on either of them though based on experience Toshiba speakers in general tend to be sleepers.

Funnily enough I've read up on most of the vintage Klipsch speakers though the one that has always stood out Asia sound I'd like to have is the Cornwall. I don't think I'm really missing out on anything with these DIY speakers though.

I'll probably start slowly tweaking my second system soon to get it as close as possible to performance parity. That will remain my horn system. First step will be removing the OPAMPS from the output stage of the TDA1541A DAC, using some DC blocking caps and quality RCA's instead. That won't happen before putting Duelund silver bypass caps in my main systems DAC though ;)
 
I'm so sorry to hear that. Though really I should get down to just 1 system. I've too many tempting me to always improve them....

That rabbit hole never ends, even with 1 system I am still looking every day for the next great find. Im thinking I need to try a lampizator dac my wallet disagrees
 
That rabbit hole never ends, even with 1 system I am still looking every day for the next great find. Im thinking I need to try a lampizator dac my wallet disagrees

I'm actually down to little tweaks like capacitor upgrades etc. Actual components in my main system is stable. Slowly selling off my excess gear.

Once the Toshiba SS41 is in my second system I will try my Marantz M7 with my Tascam AVR, see if maybe I can sell off the Oldchen K3 tube integrated and speaker switch box.
 
Zenith in the house, Decware has no problem driving them, They do have a bit of harshness, Been playing for approx 4 hours now. I can certainly hear why so many like these drivers I picked up the 49CZ873 round magnet version.

Now I have to wonder if there is an improvement with the earlier square magnets ? I am also kicking my own A$$ for spending so much on supposed better drivers, makes me sick I bought this pair for 90.00 delivered. Not sure these will unseat my Jordans but its fun trying, The Jordans have ZERO harshness

Oh Well onward / upward :bigok:
I think you should run them for a month before you assess harshness. I have 49cz852 and 49cz873 I think the only difference is more base from the 873 round magnet.
 
I found my 49CZ924 to be exceedingly smooth and a bit short on treble. Aurum Cantus ribbons got around that issue just fine. They're quite incredible when you factor in their age. Best part of 70 years old.
 
So Pgeist, Have you heard the round magnet versions ? What would you say is different / better with the alnico ? Its hard to believe the magnet structure could make the drivers heads & tails better, Perhaps some nuance.

MJW, if you prefer the lions share of music to the front why not go with Horns ? I have used ORIS horns in several setups while they wont image like OB they do image and will hold a STRONG pinpoint image with a nice wide stage & even some depth depending on placement

No, I'm going by your statement that the round magnet version has harshness which is the polar opposite of my Zenith alnico's.
 
No, I'm going by your statement that the round magnet version has harshness which is the polar opposite of my Zenith alnico's.

OK Got it, (Broke in back in 1957, I love that LOL) I can understand your view. Thing is in a very short time the 49cz mellowed. I do have a pair of Alnico on the way cz1045. Lowthers PM4a are in the house I thought they would be harsh, but surprisingly not, I had a pair of DX3 some years ago they could make the ears bleed. Im going to have to have a driver blowout sale 7 pairs is a bit much
 
Tang Band 1808 in OB sound very good but not up to the task when compared to the Zenith or the Lowthers. They are very good had I not heard the others I would think one could easily live with these. ZERO harshness perhaps a tad rolled off on the high end. Alnico Zenith should be here in a day or 2 right now its zenith ceramics or lowthers on top. The lowthers are much crisper and airy but those damn zenith sound so holographic
 
Back
Top Bottom