• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

I have been reading and watching some Videos over at GR Research. Danny Richie has some interesting ideas concerning Open Baffles and Baffle size. Basically he seems to be of the mind that a more narrow baffle allows for more transparency he uses longer side wings on one side and a shorter side wing on the opposite side. This flattens the response without the use of filters etc...

Anyone here heard any of Gr Research OB Designs ? Some of them get a tad pricey.

With my Decware ZF15M's Large(ish) Baffle I do get some of what Richie describes My speakers never fully disappear in the room there is always some artifact in the music that you can hear coming directly from the speakers.
 
There are advocates of skinny baffles as well as for wide baffles. But if you use a single driver without bass augmentation you'll need wide baffles for sure. These from MJK are some of the widest I've seen.

OB_Wings_Out.jpg
 
I'm sure this is here somewhere, but......

In the H-frame for the Eminence 15a, is the baffle set in the center of the cube?

At 17 inches, with a 3/4 inch baffle, I've got the edge of the baffle at 8 1/8 from front and rear. Is this correct?

Thanks
Frank
 
I'm sure this is here somewhere, but......

In the H-frame for the Eminence 15a, is the baffle set in the center of the cube?

At 17 inches, with a 3/4 inch baffle, I've got the edge of the baffle at 8 1/8 from front and rear. Is this correct?

Thanks
Frank

Those are the dimensions I used but don't think of them as critical.
 
A coworker is throwing away these speakers at work and countless people have passed them up and I did also at first because they are beat up and only 45w.
But then I thought I wonder if they would be good to try out as my first set of open baffles since the 10" woofer must be somewhat full range paired with only two tweeters.
So I decided to open them up before I take them home and here are the drivers.
20210318_172830.jpg 20210318_172834.jpg 20210318_172825.jpg


Can anyone tell me if these are any good to try out? I know they won't take much power or go very loud being only a 20 watt driver but it would give me a good excuse to go on the hunt for a fleawatt amp.


So should I take them home?
 
I would certainly take them home as they are Foster alnico's. Foster gave birth to Fostex in 1973. Original production started in Japan, then Korea and now their speakers are made in China. Keep everything in place and see how they sound first with the backs off and then in cardboard mock ups. They'll be bass shy but that's easily remedied with bass woofers. The crossover is nothing more than a tweeter cap so they're running full range. Alnico drivers made these days can get pricey.
 
I would certainly take them home as they are Foster alnico's. Foster gave birth to Fostex in 1973. Original production started in Japan, then Korea and now their speakers are made in China. Keep everything in place and see how they sound first with the backs off and then in cardboard mock ups. They'll be bass shy but that's easily remedied with bass woofers. The crossover is nothing more than a tweeter cap so they're running full range. Alnico drivers made these days can get pricey.


Thank you, I did bring them home last night but I won't have a chance to even try them for a few days. I'm kinda looking forward to hearing them even though I know they are nothing special.
I wonder why they used two 3" driver/tweeters instead of including a midrange. Would that mean that the 10" driver must cover most of the frequency range itself?
 
Thank you, I did bring them home last night but I won't have a chance to even try them for a few days. I'm kinda looking forward to hearing them even though I know they are nothing special.
I wonder why they used two 3" driver/tweeters instead of including a midrange. Would that mean that the 10" driver must cover most of the frequency range itself?

Looking forward to your impression of the Fosters. They may sound quite good.
 
I have been reading and watching some Videos over at GR Research. Danny Richie has some interesting ideas concerning Open Baffles and Baffle size. Basically he seems to be of the mind that a more narrow baffle allows for more transparency he uses longer side wings on one side and a shorter side wing on the opposite side. This flattens the response without the use of filters etc...

Anyone here heard any of Gr Research OB Designs ? Some of them get a tad pricey.

With my Decware ZF15M's Large(ish) Baffle I do get some of what Richie describes My speakers never fully disappear in the room there is always some artifact in the music that you can hear coming directly from the speakers.


I’ve used Danny’s research on wings with great results! Wild Burro alnico drivers are fantastic!
 
When I had the Betsy drivers in folding wings I used piano hinges which stopped leakage by filling in the gaps and they weren't expensive at Big Lots. The nice thing about the Betsy driver is they are designed by Misco strictly for OB's. They have high Qts and make decent bass for an 8" single full range driver.

View attachment 2162694

I used a similar unilateral long wing and a very short wing with fantastic sound resulting!
 
A work in progress...

I put the Zenith 852s in my Dahlquist setup, until my amps and H-frames are ready. Using the DQ LP-1 active XO to dial in the sub.

Couldn't wait.

Wow! Even with the sub-optimal placement.

Listenable, is the best description for me at least. Hours, no fatigue whatsoever. Just remarkable for 50+ year old drivers mounted on some plywood.
And they're getting better. Each day they seem to open up a bit more.

Thanks to all.
 

Attachments

  • IMG_20210326_2224131.jpg
    IMG_20210326_2224131.jpg
    103.7 KB · Views: 31
  • IMG_20210326_2225332.jpg
    IMG_20210326_2225332.jpg
    78.4 KB · Views: 36
My latest project, Lii F-15 up top and Lii W-15 below, Currently running the F-15 Full Range, and Low Pass cutting the W-15 at 300Hz. Sound is best I have had to date. the speakers disappear in the room the imaging is 3 dimensional, almost holographic. Still pondering a finish

1.PNG 2.PNG 3.PNG 5.PNG 4.PNG
 
Last edited:
Hi

I’ve been reading a lot on this friendly site but I don’t post often.

Quick question about Zenith 49CZ860 and 861.

We often see these 2 drivers used in a few Zenith console, often connected in parallel to a mono amplifier. Since these have 2 different model numbers, do they sound the same? I’m planning to buy a set (1 per side, stereo setup) unless someone confirm that they sound different.

Thanks for your help
Eric
 
Back
Top Bottom