• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Here's the Omega version of the folding wing baffles using the Visaton B200 drivers.


hero_visaton.jpg
 
What is a betsy driver?

EDIT!

I see it further in the link above from wild burro.

Is it a specialty driver only available through them?

They are made by Misco. I think Caintuck Audio sells them but I believe WBAL is their source. They are also advertised on the Decware site.
 
Last edited:
They are made by Misco. I think Caintuck Audio sells them but I believe WBAL is their source. They are also advertised on the Decware site.

Yep. That’s how I got started. The Decware - Caintuck - Betsy connection.

Steve Deckert and Caintuck Randy Rash are my audio mentors, and the good folks on the Decware forum.

I originally had Randy’s Betsy baffles, then Steve scaled them up, found out about the Lii Audio drivers, and that’s where I am now.

 
Yep. That’s how I got started. The Decware - Caintuck - Betsy connection.

Steve Deckert and Caintuck Randy Rash are my audio mentors, and the good folks on the Decware forum.

I originally had Randy’s Betsy baffles, then Steve scaled them up, found out about the Lii Audio drivers, and that’s where I am now.


I met Randy a few years ago at Hornfest. That was while Ed Schilling was still selling his Hornshoppe Horns in Leesville, SC. As I recall Randy had a pair of Eminence Alphas in open baffles.
 
I met Randy a few years ago at Hornfest. That was while Ed Schilling was still selling his Hornshoppe Horns in Leesville, SC. As I recall Randy had a pair of Eminence Alphas in open baffles.

Yep. The alphas are what he was using and recommending before Lii came on to the scene. Randy is a super good guy, and one of the nicest fellows I’ve met in this hobby.
 
Not to change the subject, but after quite a bit of time fiddling and tweaking, my OB nirvana, has been reached. (Until I try the Lii F-15, I guess, my next project. Are we ever really done? Quite a bit of fun along the way, though)

Here's what I ended up with:

-Zenith 852 OBs, Alpha 15 H-frames, with Yung plate amps.
-Magnavox 8802 updated by the great Gordonw.
-Khadas Tone Board
-FX Audio Tube 03, with Philips EF-95s, for me, the best of the tubes I've tried. (BTW, for my ears, at least, the 03 sounds better than the 01, which sounded a bit flat, even with the Philips tubes. Perhaps because I like to fiddle with the tone controls, depending on what I'm listening to. )
-Fostex forward facing tweeter, Realistic pod, rear facing, out of phase.
-Added the plywood behind the OBs for now, finishing of basement pending. It did open things up.

Lost a few hours in it today. Totally involving presentation, especially with folk, acoustic, jazz, small ensembles. When I want huge scale and punch, I crank up my 4-way Bozaks. (Thanks Retrovert), or the DQ-10s. Regardless, though, the OBs have a certain something that is addictive and not present with the other speakers I have.

Thanks to Poultrygeist for starting me on this path. Incredible performance for, well, much less than I could have spent.

(BTW, recent construction in the house, hence the dust. Ugh!!)
 

Attachments

  • thumbnail.jpg
    thumbnail.jpg
    109.8 KB · Views: 36
  • thumbnail (1).jpg
    thumbnail (1).jpg
    113.6 KB · Views: 36
  • thumbnail (2).jpg
    thumbnail (2).jpg
    124.2 KB · Views: 37
  • thumbnail (3).jpg
    thumbnail (3).jpg
    105 KB · Views: 36
Not to change the subject, but after quite a bit of time fiddling and tweaking, my OB nirvana, has been reached. (Until I try the Lii F-15, I guess, my next project. Are we ever really done? Quite a bit of fun along the way, though)

Here's what I ended up with:

-Zenith 852 OBs, Alpha 15 H-frames, with Yung plate amps.
-Magnavox 8802 updated by the great Gordonw.
-Khadas Tone Board
-FX Audio Tube 03, with Philips EF-95s, for me, the best of the tubes I've tried. (BTW, for my ears, at least, the 03 sounds better than the 01, which sounded a bit flat, even with the Philips tubes. Perhaps because I like to fiddle with the tone controls, depending on what I'm listening to. )
-Fostex forward facing tweeter, Realistic pod, rear facing, out of phase.
-Added the plywood behind the OBs for now, finishing of basement pending. It did open things up.

Lost a few hours in it today. Totally involving presentation, especially with folk, acoustic, jazz, small ensembles. When I want huge scale and punch, I crank up my 4-way Bozaks. (Thanks Retrovert), or the DQ-10s. Regardless, though, the OBs have a certain something that is addictive and not present with the other speakers I have.

Thanks to Poultrygeist for starting me on this path. Incredible performance for, well, much less than I could have spent.

(BTW, recent construction in the house, hence the dust. Ugh!!)

Since we have much the same system I can attest to how good it sounds. The journey is never over as "different" can be just as compelling as "better".
 
My OB journey started after building and hearing John Busch’s Manzanita posted over on DIY audio. “Wow the instruments sound real”

I was in lockdown and had already purchased the drivers for a stupidly cheap and basic build over on stereonet forum and once again this design blended open baffle (or boffle as the cabinet was 2 feet deep) and high sensitivity with lots of cone area and I discovered truly low distortion and dynamic range. I never really got classical music till I experienced volume swells from 65db to 110db and now I love it and would like to explain it live in our opera house.
As a party trick for friends I crank Rage against the machine to 110db and the common response is a yelled “it’s loud but not hurting my ears”

then this thread and the comments from poultrygeist pushed me to develop the system further which saw the H frames added and the cabinet depth reduced and drivers balanced and I got tactile bass down to 30hz

now I’m just tempted to throw a bunch of money into upgraded drivers after seeing evsentry3’s towers with Tang Band W8-1808’s back in the middle of this thread

My current build is
3 x Altronics C2000 drivers with the top run full range and the bottom 2 run in series with a 2mH inductor rolling off the top end
1 x 15” Eminance Alpha in H frame cabinet

My NAD C388 has a 150hz high pass filter which I use to power the full range towers and the pre amp out runs through a Dayton Audio DSP with matching filter to a Nuprime power amp powering the woofer cabinets

here’s a few pics of the various iterations and the development process

the frequency plot is pretty crude using the mic in my iPad from the listening position

cheers Pete
 

Attachments

  • A3FB9211-C9C8-43B3-A7BB-E729F47350EE.jpeg
    A3FB9211-C9C8-43B3-A7BB-E729F47350EE.jpeg
    92 KB · Views: 32
  • 08B9ED0D-FDBB-49D7-8FD7-843A16768338.jpeg
    08B9ED0D-FDBB-49D7-8FD7-843A16768338.jpeg
    52 KB · Views: 31
  • 6B08930E-0F2C-4A8F-8A8B-1EFB82C5514B.jpeg
    6B08930E-0F2C-4A8F-8A8B-1EFB82C5514B.jpeg
    107 KB · Views: 30
  • FB102D52-A867-4CC7-87FE-8EF067B0C5C8.jpeg
    FB102D52-A867-4CC7-87FE-8EF067B0C5C8.jpeg
    61.3 KB · Views: 26
Last edited:
Hey RePete,

Noticed the name drop. You are doing the fun thing and just dove in and built the OB! Trying different drivers and baffles is a big part of the fun.

I built a number of different baffles, but when I started with the short line of TB's, I cut what I thought was pretty much a temporary 'try-it' baffle. They worked out sonically so well, I've not re-addressed that for way too long. I've been thinking of ways to do a 'nicer' build and I am kind of circling the idea, but have a few things otherwise in progress for friends that I need to finish first. So who knows how much longer some more or less flat boards may carry on.

The TB1808's at least here are way, way up in price. I've got and haven't ever unboxed the lower cost 2145 version of the 8" TB's. I was curious about the real quality difference between them and if the ceramic magnet based driver gave up much to the neodymium magnet driver. Still need to explore that. But I did build a line with the a couple econo 8" drivers including the so called Bufo replacement driver and it was simply awful. Doing multiples lowers cone movement distortions and gives a bit of a line source drive into the room, but doesn't make a bad driver sound like more than a bad driver. :smoke:

But once you climb out of the box and start using the room as an advantage, it's all a lot of fun!

EV3
 
I almost swallowed my tabacky when I saw the current price of the TB 1808's.....They have tripled in price. I think I paid $105 iirc!!!
264-894Tang Band W8-1808 8" Neodymium Full Range Driver1EA$210.53$210.53
 
When I first started the OB journey I tried the W8-1808 Tang Bands ( not so expensive back then ) in the folding wings. They were so large and ungainly I called them "Monstro's" after the whale in Pinocchio. The TB's were thin sounding in these baffles and unlike the Betsy's they screamed for bass assist.

P2270031.jpeg
 
Last edited:
I used pipe insulation to cushion the bottom and top of the baffle. I replaced the 1808's with Betsy drivers and added piano hinges to the folding wings.

P2270030.jpeg
 
Last edited:
Back
Top Bottom