Post a picture of your turntable

[peterfranks]

Sony TTS-3000A

Sony TTS3000A transcription turn table - c1968
Grace G565F Tone Arm - c1968
AT440MLa cart and needle

 

[3kitty]

^^^^Beauty!

 

[Guest101]

Sony TTS3000A transcription turn table - c1968
Grace G565F Tone Arm - c1968
AT440MLa cart and needle

I've always thought that was one of the nicest looking TT.
Your plinth looks fabulous and the arm looks perfect w/ it.

 

[Wolfe64]

Jeez there's alot of nice turntables here.

This is the turntable I an currently using out of the 14 or so I have.

Mark

 

[beatcomber]

My latest acquisition, a Dual 1019 that was made for the European market (note the record size selector indicated with mm instead of inches).

It was totally filthy but cleaned up pretty well. (I've treated the plinth to some Howard's Restore-A-Finish already.) I had to do some soldering to get sound out of it, and it still needs a tear-down and rebuild, but I'm pretty pleased to have it. The low-end AT cart will be replaced with an M91ED.

 

[jkilla]

My favorites, the Denon sisters:
Family photo:

The older sister (but newer to me, Denon DP-60L):

And her younger sister (Denon DP-62L):

Ooooh they are fine sisters indeed!

 

[peterfranks]

I've always thought that was one of the nicest looking TT.
Your plinth looks fabulous and the arm looks perfect w/ it.

thank you so much. I was fortunate to find it .... use it almost every day ....

 

[peterfranks]

Jeez there's alot of nice turntables here.

This is the turntable I an currently using out of the 14 or so I have.

Mark

I had a Lab 440 for several years - excellent TT - what a look!
:thmbsp:

 

[mhainz]

Well the original rubber mat on my SLD2 finally started to ooze so I replaced it with a cork mat. Reckon it looks ok.

 

[gary7]

Garrard Zero 100SB Back in Black

Had this for awhile. Gave it a lube job and back in action with my trusty Shure M95ED.

 

[AudioSoul]

Well the original rubber mat on my SLD2 finally started to ooze so I replaced it with a cork mat. Reckon it looks ok.

I love those cork/rubber mats. I have purchased three for various tables. They look and sound great......:thmbsp:

 

[Eddie Edirol]

Had this for awhile. Gave it a lube job and back in action with my trusty Shure M95ED.

That Zero 100 is god damn gorgeous. I want to get one just to make it a stacking unit. Maybe I could find one for 78s. I know how to fix sick Garrards, so I might have to think about this....

 

[airplanedriv]

Just got my new Sony PS-6750 set up, using the factory magnesium head shell, and a Shure M91-ED.

Shown playing "Waltz of the Gypsy Barons" by Johann Strauss.

Sounds very...well...Musical...!!

2nd pic is the Mitsubishi DP-620 in the living room, set up with an aftermarket aluminum head shell with an Ortofon Omega w/OM-10 stylus.

 

[dobyman]

I recently picked up a Thorens TD-124 MKII, with a SME 3009II. I put a Grado GF-1 cart on it and a new plinth and new mushrooms from Schopper.

So far.....

 

[sruddy]

Nice! I like the perspective of shot #2.

 

[3kitty]

Here is the newest addition (JVC QL-Y5F) in its rightful place - just got it back from the tech after he installed and properly aligned/set-up the new DL110. Also confirmed speed was accurate!

Except for the audition I had never seen/heard this table perform - it needed a new cart or stylus so I hadn't played it all at home.

110 likely needs to break-in a little but the this combo sounds terrific and the JVC performs flawlessly.

 

[dobyman]

Thanks sruddy!

 

[the_nines]

I recently picked up a Thorens TD-124 MKII, with a SME 3009II.

Beauty, enjoy!

They are special decks.

:thmbsp:

 

[dobyman]

Thanks Nines :thmbsp:

 

[ferninando]

at the time it seemed like the rite thing to do but now I regret selling my 124/II with SME/II arm. amybe some day another will come along. NOT!!!!