Receiver for 4 Ohm speakers

[MotownHawaii]

Aloha everyone,

Have 4 ohm speakers and need a 2 channel receiver. Need phono output, subwoofer out, bluetooth, and maybe wifi (not sure)

Not rich. Any suggestions???

 

[avionic]

Welcome aboard. Most receivers should be able to handle a single set of 4Ω.

 

[mikeybc]

One of the entry level Yamaha's will work. If you don't need a am/fm tuner the A-S301 would be good.

Budget ? "not rich" is pretty vague in this hobby

 

[swamppirate]

I have a set of 4-ohm AR TSW-510’s...be careful with the amp/receiver you choose...clipping fried Two tweeters due to the underpowered application. Maybe its just these speakers, but they demand power.

 

[whoaru99]

I have a set of 4-ohm AR TSW-510’s...be careful with the amp/receiver you choose...clipping fried Two tweeters due to the underpowered application. Maybe its just these speakers, but they demand power.

It's not the receiver nor the speakers fault...

 

[hopeless]

What speakers?

 

[KentTeffeteller]

Yes, as not all 4 ohm loads are created equal. Some don't go lower than 4 ohms, some drop to as low as 2.7 ohms, some of them demand more current than others, some are very reactive. The type of speakers you're using is critical information.

 

[Old Guy8]

I've been satisfied with a Rogue Sphinx V1 for a few years driving 4 ohm Maggies. Integrated hybrid amp.
No budget $ stated.

 

[joekapahulu]

What are the speakers? Then we can see if we can find the impedance curve in a review. That will enable a better answer.