• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Tracking force gauge?

Register to hide this ad
G'day mate, I use the ultra basic Ortofon 'balance' for measuring tracking weight. It's accurate enough and does the job fine. Regards, Felix aka catman.
 

Attachments

  • osg_sml.jpg
    osg_sml.jpg
    2.7 KB · Views: 44
Plenty of cool ones. Branded for the table or for vinyl in general but Ive found the best for my purposes is a $14 digital scale off ebay.

and you can use it to measure weight for many other related things, and non related things.

..
 
I have the Shure, but I'm not impressed with its build quality. The sliding weight doesn't really stay where you put it. I squeezed it a bit with a pair of pliers for a tighter fit, but it still wanders a little. It also only goes to 3 grams. Not a problem for most modern things, but the Pickering on my Garrard wants 4 grams with the brush in place.
 
I have the Shure, but I'm not impressed with its build quality. The sliding weight doesn't really stay where you put it. I squeezed it a bit with a pair of pliers for a tighter fit, but it still wanders a little. It also only goes to 3 grams. Not a problem for most modern things, but the Pickering on my Garrard wants 4 grams with the brush in place.

you do realize that if you place the stylus in the second groove that it doubles the displayer tracking force right. 3 now equals 6 and such.
 
The last Scale I bought, was the Proscale LC-50 from Old Will Knott Scales for about $30 or so. Weighs to 50g in .01g increments, is dead accurate, and uses regular AAA Batteries, no wierd watch batteries, or such.

Vastly superior to the Shure SFG-2 at around the same price. Just raise the Scale to Platter height with some Playing Cards, and place alongside Platter to weigh VTF. Mark
 
you do realize that if you place the stylus in the second groove that it doubles the displayer tracking force right. 3 now equals 6 and such.

The gauge has numbers up to 1.5, putting it on the double scale gets it to 3 grams. I did some hokey-pokey BS that *should* have me darn close to 4g, but I wouldn't wager how close it really is.
 
+1 sfg2 :thmbsp:
..but a digital scale may be simpler if you dont have steady hands as it is fiddly to use
 
Seems like we have had the SFG-2 vs digital scale debate a few times before. I just now used a digital scale to weigh a Susan B. Anthony dollar about 10 times and got three different readings...8.05, 8.07 and 8.08...although 8.07 did come up over half the time.
 
Plenty of cool ones. Branded for the table or for vinyl in general but Ive found the best for my purposes is a $14 digital scale off ebay.

and you can use it to measure weight for many other related things, and non related things.

..
:thmbsp: Thats what I use and it works great.
 
Last edited:
G'day mate, I use the ultra basic Ortofon 'balance' for measuring tracking weight. It's accurate enough and does the job fine. Regards, Felix aka catman.

+1:thmbsp: - I got mine free (almost) with an Ortofon cartridge, too, but it's also available very cheaply from many cartridge sellers.
 
I prefer my cheap digital scale to the Shure balance scale, although one has to place the stylus exactly in the center of the scale in order to get the most accurate results.

I still keep the Shure scale handy for whenever I need to weigh a Stanton 681, since the downward pressure from the brush throws off the digital scale's readings. With the Shure scale, I can hang the brush off the side.
 
Back
Top Bottom