• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

2230

  1. Mike Sweeney

    Feeling a little buzzed :/

    Well, the receiver not me so much :) 2230 restored. Everything works great with a small itty bitty exception. The phono setting will give what sounds like a 60 cycle hum if the volume is up about 1/2 way. If I touch the chassis, it goes away. This started because in the loft where I had it, I...
  2. Mike Sweeney

    2230 done

    Finished :) This took some time with having to build a new bench and some other projects. All new caps.. ALL of them New micas for power transistors New power switch DeOxit scrubbing 1 shorted wire found and fixed New vellum new LEDs Wonky attenuator switch cleaned Faceplate scrubbed with...
  3. Mike Sweeney

    2230 Update

    Oh the joys of a restoration ;) So I finally had some time to put into the 2230 of mine. I could not get the stereo lights ( 2) to work. I had pulled the bulbs which were toast and replaced them with some LEDs I gotten off eBay as a package deal. The LEDs were warm white and worked fine on the...
  4. Mike Sweeney

    2230 is my newest effort

    I finished up my 2285B and I have in place of pride in my loft with the 2226B relegated to the floor right now. I'm still debating on keeping the 2285B but while I noodle that around, I've picked up a 2230 and started the restoration. Overall it's in pretty fair shape other than the power switch...
  5. W

    marantz 2230 pre-amp

    Hi- new member. I have a 2230 as well as modern gear (anthem AV amp, speakers with Raal ribbons, digital sources). I like the 2230's warmth and musicality with the digital sources and ribbon speakers but it seems to lose some of the detail that comes from my modern set up when using the anthem...
  6. Landcruiser

    Marantz 2230 and not being able to leave well-enough alone!

    Hi everyone, I'm new here and recently posted this is the Solid State forum before realizing Marantz had its own forum...here goes! I recently picked up a minty fresh, *all original* Marantz 2230 from my local Craigslist of all places. I got her home and cranked her up..sounded great aside...
  7. Landcruiser

    Marantz 2230 ~ What did I fry?

    Hello, All! This is my first post here on AK, so be gentle.. I recently picked up a minty fresh, *all original* Marantz 2230 from my local Craigslist of all places. I got her home and cranked her up..sounded great aside from a scratchy volume pot. So I figure I'll open it up, clean out the...
  8. dishman

    marantz 2230 no tone control

    My Marantz 2230 just lost tone control. The sound became very thin, and none of the bass, mid, or treble pots have any effect. It affects both channels. Volume works fine and the loudness contour still has an effect when turned on and off. I've not noticed distortion, although it's so thin...
  9. runningdog

    Replace 150 ohm 5w resistor on 2230 power supply

    The square ceramic 150 ohm 5w resistor on a 2230 power supply can scorch the C804 electrolytic capacitor and the wire running to the collector of the outboard transistor. It is squeezed in-between these two items (this does not apply to the units that have the resistor mounted underneath). Is...
  10. Wpala

    2230 DC voltage

    Hi there great forums very informative learning something everyday. New to me Marantz 2230 works great but out of curiosity checked the Dc voltage on speaker terminals and both are reading around 35DCV I ahve always thought that is very bad for the speakers and was planing on doing re-cap on...
  11. Two Steps

    Listening with my ears - and figuring stuff out...

    Hey all! This post is just an effort for me to process through some stuff and share my thoughts. I am 31 and a newby to the whole hifi thing. I wasn't around during the hey day of audio, so I'm just learning and listening as I go; using this forum as a barometer of sorts. I've been running a...
  12. Y

    Marantz 2230 bias too low

    hello, i have a 2230 with a bad amp, i already change all the bad transistors and other parts, by the way all the transistors except the input one was toasted, both 1n60 diodes, sv-3a diode, emitter resistors, and at least 7 miscelaneus resistors were toasted or open, all electrolitcs are new...
  13. bibota

    2230: H802 running hot

    Noticed transistor H802 being quite hot to the touch, also the voltage at its collector measuring higher than what it presumably should: 51.7V as opposed to 42.5V on the schematic. Did check it on another 2230 and it is pretty much the same thing: 51.2V at collector and running hot. I wonder...
  14. Two Steps

    Marantz 2230 + MC250 or 1700 receiver

    Hey all, I am going to attempt to get into the McIntosh world soon and am looking for some wisdom. I currently run a refurbished Marantz 2230 as my daily driver in a larger sized living room. I don't need crazy power as I use some mint Klipsch Quartets. I have narrowed things down to an...
  15. Isiah

    New guy with speaker question...

    Hi there. I've been stalking this site for a while, but this is my first post. Vintage audio is new to me, but I recently decided to get into it a bit, I guess to relive sitting around as s kid at my aunts house listening to old records. I have two questions about a set of wharfedale e30...
  16. justinfranx

    Please help me repair my Marantz 2230!

    Hey there, a while back I bought a recap kit from irebuildmarantz. The unit worked fine but I wanted to do the recap just to make sure it was working as best as possible. I am a total noob but successfully did the recap following the online guide. The last steps are to do the power supply...
  17. cemerson

    Film Cap on the Power Switch/Button 2230

    I know I've seen it here before, but I can't find it now. I have a 2230 that had an odd aftermarket switch that was installed. I've removed that and have a replacement, but every switch I've seen had a Film Cap on the side of the switch. I had a note that it should be 0.033 uF / 250 vdc film...
  18. Y

    found on the net: Marantz 2230 unboxing

    for all the Marantz 2230 lovers https://www.iamthejeff.com/post/26/marantz-2230-an-unboxing enjoy! best regards Pio
  19. ddawg61

    Discontinued chassis caps found on the Marantz 2230 recap list

    Hi, I'm getting ready to recap my first 2230 and have been busy reading many archived threads and part lists. To the best of my knowledge the chassis caps recommended by many (and on the recap list) are discontinued according to the Digikey website. The filter cap that's discontinued is...
  20. TeiscoGuitar

    Marantz MR 1155

    There seems to be a lot of hate online for this generation of Marantz, which is a real shame. I think it has two great things going for it. 1. It sounds better than any other receiver I have ever had 2. It wasn't like 400-900 dollars. So where does the hate stem from in these transitional...
  21. W

    2230/2275/2385 restore

    Have a 2230 I bought new that has been in a box for 10-12 years. Want to recap/new lights etc to use in office. The 2230 got put away when I got new speakers it couldn't drive and went to 100 w/ch Denon. While lurking here reading I also started looking at CL and got first a 2275 and then 2385...
  22. Main system... Now with Bozaks!

    Main system... Now with Bozaks!

    A lot of re-arranging and speaker swapping since last fall. Equasounds are new, as are the Bozak B-302A and Mitsubishi gear. Lots of great sound here.
Back
Top Bottom