• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

bass

  1. M

    Bass through speakers

    I've got a pair of 70W Pioneer speakers and I've been curious of if I could hook them up to the left and right channels(35W) and split the sub channel(60W) to them also. In my head theoretically if I were to do this each speaker could receive 65W but I'm not sure how it actually works.
  2. vinylisfinyl

    Sansui 990DB with weak bass...filter caps?

    Greetings, fellow AK'ers, I have a Sansui 990DB that I have been slowly revitalizing over the past couple of years. Overall the unit is in great shape with clear, balanced sound out of both channels, but the bass leaves a lot to be desired. No matter what speakers I've connected it to, the bass...
  3. SweetRolls

    Passive subwoofer vs. Active subwoofer

    Hi, I have a budget of $100 and I'm wanting to add some bass to my PC setup. I'm trying to decide whether I should go for a used passive subwoofer, or a used active one. The idea of a passive subwoofer really appeals to me because of the flexibility. With an active sub, I would be limited to the...
  4. vinylisfinyl

    Magnavox Astro Sonic Bass Control Packaged Circuit...what's inside?

    Greetings fellow Solid-Staters, and Happy Belated Thanksgiving! I'm working on my grandmother's Magnavox 1RP660 console stereo, chassis R204-18-20, and need some advice on how to proceed with troubleshooting a problem: When the four position Bass control is put into any of the positions below...
  5. SimonSilan

    Having a go at KHorns !

    Good to be here. Finally. Long time user of the massive combined knowledge on the site. Time to get a bit more serious as I have a few days free (don’t we all:(!! Working on my last two sets of speakers. Yup I truly believe I’ve reached that point. Of wanting to just sit n listen and forget...
  6. FireGuruMN

    Polk LSi7, Big Sound, Little Box, High WAF.

    I had to get some music in the living room a few years ago. It had to sound good. It had to have high WAF (wife acceptance factor). I heard good things about these Polk LSi7's. A pair showed up on shopgoodwill and I landed them for about $200.00 which is about what they are worth. Since...
  7. D

    Weird recurring problem

    Wonder if anyone knows what might be causing this. I've got a problem with the bass dropping out in the right channel. Only happens when listening to records so I don't think it's the amp or speakers. Turntable is a vintage Rega Planar 2 with an Audio Origami rewired Rb250, Shelter 201...
  8. rocketrobo

    HPM-100 - suddenly way too much bass?

    I've has a pair of HPM-100's for over a decade. Got them cheap, refinished the cabs, rebuild the XO according to the AK recommended spec and replaced one bad driver with a part number match. I've been very happy with the sound! A few months ago, I installed a vintage tube amp. And for some...
  9. J

    Sunn Concert Bass Amp - Troubleshoot and Repair

    It's not often I work on transistorized amplifiers, however a couple of times a year I take on such a project. This Sunn concert, built around 1973 was owned by the same person since around that time and was looking for electronic repairs with no cosmetic work. I decided to take on the task...
  10. mr.gone

    Is the KLH Model 6 short on bass?

    I picked up a pair of these from a guy on CL last night. These are early run models -- serial numbers in the 20,000s -- and so the grill and everything else is glued down. They sounded a little bass shy in his place, but I thought it could be the fact that he had them on stands, the amp was...
  11. AnthonyRS

    Help with: No Bass coming from Turntable

    Hi All, I recently connected my turntable to a new setup and am lacking any amount of bass. Months of troubleshooting has brought me nowhere. I have eliminated the input I'm using for my soundsystem, as all other sources I plug into that input have expected bass. I've also eliminated the Phono...
  12. L

    Please Help, speaker crackle at low volume.

    Please help. I have a set of Bowers&Wilkins DM640i that I have replaced the woofers in and as of recently I have been getting an annoying crackling/popping noise out of one of the four 8” bass drivers. Sounds like a loose connection, but is not and only happens at around 100Hz. The measured...
  13. J

    Fender Deluxe Reverb Amp - Loss of low-end signal troubleshooting

    The deluxe reverb is back on the bench, a shop amp. With a new problem. It would seem, as demonstrated that the 2nd (reverb) channel has completely lost low frequency response. Using a logical approach and a highlighted schematic we will quickly isolate the fault area, test and repair the...
  14. Cody AOC

    What does it take to build 3 way speakers?

    To begin this it's not audiophile grade but I wanted to know if I used two 12" or 15" car subwoofers per box and used some good sounding mid range speakers and tweeters with maybe similar sensitivity and used 2 midrange speakers and 2 tweeters per box i'm not sure I just want to copycat the...
  15. S

    Accuphase E-202 Clipping when bass boost

    Hi, I recently revived an old Accuphase E-202, but when I turn on the bass boost, I can hear slight clipping. I have not re-cap the unit, only work done is replacement all the failing and ailing transistors on the power supply board (719-0004-00), main drive amp board (710-0002-00) and the...
  16. markbark12

    AR-3A speakers, Why were they so good regarding the deep Bass

    GOOD GOD IT'S BASS Hi everyone! Been away about ten years. Glad to be back! I have just rebuilt a pair of AR-3A speakers. I love the way they sound but after the rebuild I'm left with some questions and a few comments. Firstly why was such a thin grade of copper wire used for the outside...
  17. 82smithtown

    EV S15-3's, Parasound 2100, and Crown XLS1502......thoughts?

    Happy Holidays all! These EV's were my late fathers and I've tried at least six receivers of varying age/wattage/brand as well as a Yamaha integrated, and nothing seems to get those 15's making the noise their size suggests they should. I had the x-overs rebuilt with all totl caps and such...
  18. DisplayERROR

    Electro Voice Interface D bass

    Hi all! Just got a pair of these speakers and they sound incredible. I have yet to hook up the included eq because they're broken at the moment but I'm curious how it affects the bass production. At the moment they sound fantastic without them but its very noticeable that the bass is a bit...
  19. LawArk

    Janszen Z-600 Bass Improvement?

    Hi: I recently acquired a pair of early 60s Janszen Z-600s. After repairing one of the speaker's electrostatic tweeter's connections, they sound great on the high end, but seem a bit lacking on the bass, which I understand is common with early electrostatics. Is there an easy way to address...
  20. Cody AOC

    Questions about Subwoofer Enclosure building

    Hi So I want to build a enclosure for my NVX Vcw 154 I will be using it in my house for music yes I know it's a car subwoofer but I already love the sound of it I want to tune it @ 30hz. It has to be kinda like a home theater subwoofer kinda size I thought about doing a 3 cu ft size and a slot...
  21. Cody AOC

    Comparing Graphic EQ's

    Hi so I came across something that I can't find what is the difference between this ART EQ355 EQ and the ART HQ231? From what specs i've seen they both show the EXACTLY the same besides the weight the Art HQ231 is 3 pounds heavier than the ART EQ355. Besides that I find no other difference and...
  22. H/K T30C

    Paradigm Phantom V2 Bass Rattling Issue

    Hey guys, recently picked up a pair of Paradigm Phantom V2 efficiency floorstanding speakers. I've got them hooked up to my harman/kardon 330c which I know for a fact is perfectly fine. The issue that is on a lot of stuff I like to listen to (such as electronic and rap) certain low frequencies...
  23. Cody AOC

    Why does my crown XLi 2500 clip light come on after being turned off?

    So i have a video of it on youtube i put on just for this forum discussion VIDEO: and i was comparing it between my two Crown XLi amplifiers they both was bought 1 year apart nothing is wrong with them just wondering why they both do this differently after just a few second of being turned off...
  24. brettMc

    New/Old Kappa 7's sound horrible

    Last weekend I picked up an expertly refurbished pair of Infinity Kappa 7's. Midrange drivers had been upgraded/recovered by the only guy on earth that still does them and the woofers were reconned by the original designer of the woofer. The seller was great and said he took great care pulling...
  25. J

    Infinity reference six

    My name is john tucker, i bought a pair of the original reference six speakers in amazing condition for $350. The foams had been replaced nicely and the tweeters and speakers were all original. I used a light base deep black paint on all cones including new woofers.I replaced the woofers with a...
Back
Top Bottom