Hello guys, i would really appreciate any advice regarding my attempt to replace the big capacitor on Marantz 140 with 2 x 10 000uF/63V instead 13 000uF that comes from the factory.Since that dual 13 000uf isn't available i have 2 new audiograde caps Matushita 10 000uF gold audiograde.Will the...
I got a pair of Cerwin Vega LS10 speakers from a friend when he moved away. The tweeter on one speaker, however, has stopped working. I've checked the diaphragm and it doesn't seemed blown so my understanding is the next part to replace is the appropriate capacitor in the crossover. The...
I am sure this has been posted many times. But...
I bought the speakers at a flea market a while back. I noticed they were buzzy playing some music off Youtube and the buzz was somewhat inconsistent. So, I bought the crossover capacitors and just replaced them all. $7.00 for the parts, $6.95...
Just wondering why on a service schematic a capacitor in the power supply section of a tuner is rated 1000uF/16 Volt and I found a 2200uF/16 Volt Cap in the unit.
Somebody said thats what was probably handy on the day of manufacture.
Safe to go with what's on the schematic?
I have a Kenwood KA-2500 Integrated Amp with some bulging capacitors and need some suggestions for replacements. The ones in question are the 4 large ones, (1) Elna 2,200 uF 50v and (3) Elna 1,000 uF, 30v, although I have determined that these 3 will have to be replaced with 35v now. I'm looking...
My preamp puts out just a tad too much DC and is setting off the DC protection in my amp. Only occasionally. Generally only when inductive or large loads are turned on in the house. Yep, I've tried different outlets and power conditioners, to no avail.
The (tube) preamp maker tells me that I...
Hi,
I have Sony ST-SA3ES tuner for long years from 1997 when I bought it brand new.
I am listening FM only, never AM.
A few years ago appears a problem - the tuner suddenly & arbitrarily started "lose reception". It start hissing for a while then knock - and everything goes back to normal...
There are plenty of videos on YouTube showing how to discharge capacitors, but none of them (at least the ones that I have found) show how to discharge a capacitor that is soldered into place. Can anyone share the proper way to discharge a capacitor that has been soldered into place? Or is this...
So I am in the process of replacing some of the caps in my unit. I ordered 1000UF 50V caps with only two leads, the original ones in the unit has 3 leads. Do I need to buy a 3 lead ones? Or can I use the ones I ordered with the 2 leads? What does the 3 lead connect to? Thank you!~
Engaging/disengaging Low Filter switch causes loud popping noise through the speakers. Regardless of the position of the volume dial the popping noise is audible and unaffected by attenuation. I have verified that this is an isolated issue with the low filter switch and only the low filter...
So I've become sort of infatuated with old record consoles and portable record players and now have 5 project pieces; 2 Sears Silvertone portables and 3 consoles. I'm starting with what seems like the easiest (the smaller Silvertone) and would like to replace the 2 caps and transistor, but after...