• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

integrated amp help

  1. N

    Help Troubleshoot Issues With Sony TA-AX390

    Hi AK - This is my first post so please let me know if there's anything missing or if it needs to go in a different section of the forum. I picked up a Sony TA-AX390 integrated stereo amplifier last spring and have had it for a few months now. I got it for a good deal alongside a separate tuner...
    • nsdigirolamo
    • Thread
    • amp amplifier help integrated amp integrated amp help sony sony ta-ax390 ta-ax390
    • Replies: 2
    • Forum: Solid State
  2. T

    Amp with variable loudness as peak limiter (?) + mids control for intelligibility. For use with headphones, mainly speech.

    I'm in need of some advice, hope you can help. I'm looking for an integrated amplifier for use in professional remote interpreting. It looks as though no headphone amps have physical tone control knobs these days, so they are out of the question. I need physical tone control knobs, preferably...
    • TerpSound
    • Thread
    • eq headphones integrated amp help loudness control mid range three-band tone control variable loudness
    • Replies: 47
    • Forum: General Audio Discussion
  3. S

    Amp for B&W 805 Matrix

    Hi all, can you advice me a good integrated amp for a pair of B&W 805 Matrix? I know they are hungry of current and watts, due to their low sensitivity (87dB). I was thinking of something like Cambridge, NAD, Rotel, but I'm open to any suggestion. My room is about 4.5m x 3m and speakers are on...
  4. B

    Missing ma6100 volume pot

    Hi guys, I have recentlly acquired an unfuncioning Mcintosh ma6100. I have dissasemblled the unit and it seems that the only thing wrong is that it’s missing the volume pot (apart the missing front glass). The problem is that i can’t find the volume pot anywhere on the internet. Is there any...
    • borke
    • Thread
    • integrated amp integrated amp help integrated amplfier ma6100 mcintosh volume control
    • Replies: 10
    • Forum: McIntosh Audio
  5. mwaehner

    NAD 316BEE distortion in one channel

    I've got some trouble with my NAD 316BEE (v1) that I've had trouble diagnosing by searching on these forums/the internet in general. I've had the amp about ten years and find it perfect for my needs; after ten years I wouldn't be that sorry to have to replace it, but I'd really rather repair it...
  6. B

    Phono Hum, even when just RCA plugged in...

    I know, I know...another phono / turntable hum troubleshooting post. In this case, however, I am rather certain that my turntable is not the issue. I think it is the Phono "Equalizer" / Stage on my MCS 2250 amp -- which is essentially a Technics SU-Z400 (manual here). This hum only occurs on...
    • BM0127
    • Thread
    • integrated amp help mcs phono stage hum technics
    • Replies: 8
    • Forum: Solid State
  7. aphex_nsw

    Philips Fisheye 22RH520/22RH550 troubleshooting questions

    Hello all, I've recently been digging back into a bunch of old vintage solid state stuff that's been on the backburner for a decade. Quite a few treasures here and there in my gear collection but unfortunately ive gotten a bit rusty on my electronics knowledge. This week's amp is a Philips...
    • aphex_nsw
    • Thread
    • din din plug help integrated amp integrated amp help philips philips 520
    • Replies: 5
    • Forum: Solid State
  8. C

    AU-911DG and an EQ (Lokius) - Pop Sound when turning ON/OFF and Tape/Source change

    Hi everyone, I use my somewhat recently acquired Sansui AU 911 DG which I truly love for the sound, but recently I introduced an EQ on my system, a Schiit Lokius, and found that when I turn the system on, there is always a pop sound if the volume is around level 35, and the louder the more...
  9. A

    EICO HF-81 constant flutter noise through speakers

    Hey guys! I recently acquired a “fully serviced/restored” EICO HF-81 which I have connected to Heresy II’s speakers and I’m getting a constant flutter noise from both speakers and I’m not sure how to go about this. I’ll take any advice at this point before I have to take it to someone to repair...
    • Augie Pink
    • Thread
    • eico hf-81 flutter heresy ii integrated amp help
    • Replies: 16
    • Forum: Tube Audio
  10. Multiverse25

    AR amplifier, problems after recap

    Hello all. I must admit I feel like a bit of an idiot. I finished recapping my AR AU amplifier. It’s the first amplifier that I’ve recapped, and I made a big mistake towards the end, and I’m hoping someone can help me out or point me in the direction of a good tech in my area. You see everything...
    • Multiverse25
    • Thread
    • acoustic research integrated amp help integrated amplfier
    • Replies: 3
    • Forum: Solid State
  11. J

    Monitor Audio Silver- help matching amp???

    Living my second childhood and just getting back into the hifi game. I recently purchased a pair of Monitor Audio Silver RS8's (love em so far). I'm driving them bi-wired with a Denon AV receiver that I've had forever (AVR-2400- 75wpc at 6ohms bi-wired) and want to get into a decent starter...
Back
Top Bottom